Search
1930 articles for “3-acetyl-7-bromo-2H-chromen-2-one” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Effect of Magnetic Field on Casting Parameters
Abstract: AbstractThe casting process is one of the oldest manufacturing methods involving squeezing / jolting the green sand used as moulding material, and further was developed with use of binders such as clay/organic resins. The constants search for newer moulding material lead to the magnetic mould involving steel shots and application of magnetic field. The preliminary trials on one of the process parameters i. e. Magnetic field was carried out and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 30–35 Read article
-
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments
Abstract: The research work is mainly focused on investigating the effects of wear parameters: filler content (0%, 4% CB, 4% Al2O3,and 2% CB + 2% Al2O3), applied load (4.905, 9.810, 14.710, and 19.62 N), sliding distance (20, 30, 40, and 50 mm) by using Design of Experiments (DOEs) approach. The experimental results were analyzed using MINITAB V16 scientific graphical and data analysis software. Signal-to-Noise (S/N) ratio, analysis of variance (ANOVA) proved …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 21–31 Read article
-
Study on Electrolytic Smoothening Technique for AISI 316 LN
Abstract: Increasing applications of stainless steel in various fields where corrosion resistance is of prime importance, electrolytic polishing enhances the corrosion resistance of the component by decreasing the micro roughness. The current paper focuses on study of electrolytic smoothening technique for AISI316LN and the factors affecting the process as well. Factors which affect this process are composition of electrolytic bath, time, current–voltage relationship, temperature, stirring rate, etc. Detail analysis has been …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 33–40 Read article
-
Development of Starch/Keratin/Chitosan Composite Material as a Substitute for Polystyrene in Food Packaging
Abstract: The increase in awareness of the environmental impact of non-biodegradable waste from food packaging, has seen manufacturers push towards initiating production of eco-friendly packaging materials. This research serves as a step forward in the direction of going green, through the development of a composite material from natural, biodegradable polymers, for use in production of packaging material for fast foods. The composite was prepared from starch and chitosan with chicken feather …
Published in Journal of Polymer & Composites · Vol. 7, Issue 3, 2019 · pp. 1–7 Read article
-
Enhanced Thermal Conductivity of Polyaniline Nanofluids Synthesized using CuCl2 as Catalyst
Abstract: AbstractThe development of nanofluids for enhancing the heat transfer properties over the conventional fluids is mainly hindered by a vital issue of dispersion stability and hence is being explored in the present work. In the present study, Copper Polyaniline nanoparticle was synthesized by the oxidative polymerization method using CuCl2 as a catalyst. The characterization of Copper Polyaniline was performed. The sizes of nanoparticles were found to be within 7.24 nm …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 20–40 Read article
-
Test Time and Power Optimization of 2D SOCs Using GA and Greedy Algorithm
Abstract: This paper presents a genetic algorithm (GA) and greedy algorithm-based solution to co-optimize test scheduling under power constraint for core-based system-on-chips (SOCs). The core testing solutions are represented as set of wrapper configurations represented in rectangular bins of width equal to the test access mechanism (TAM) bandwidth and height equal to the corresponding test time. A best fit algorithm is used for the wrapper design. Experimental results are obtained for …
Published in Journal of Power Electronics and Power Systems · Vol. 5, Issue 2, 2015 · pp. 63–67 Read article
-
Modelling of Grid Tied 3-Level Diode Clamped Inverter Using Sinusoidal PWM for Solar Application
Abstract: AbstractIn this paper the AC Loads are fed from solar energy by means of Three-level Diode Clamped Inverter. The entire system is three phase supply system. To make the system more efficient Maximum Power Point Tracking (MPPT) is used. The Perturb & Observe method is used to obtain voltage at maximum power. In this work Sinusoidal Pulse Width Modulation (SPWM) technique is implemented to generate gate pulses to make the …
Published in Journal of Power Electronics and Power Systems · Vol. 5, Issue 3, 2015 · pp. 9–16 Read article
-
Parametric Optimization of TIG Welding Process in Butt Joining of AISI 310 Austenitic Stainless Steel Materials
Abstract: Tungsten inert gas (TIG) welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. Selection of the levels of the input parameters plays a very significant role in determining the quality of a weld joint. The present study is planned to investigate effects of process parameters: welding current, gas flow rate and arc gap on ultimate tensile strength in TIG welding of austenitic stainless …
Published in Journal of Production Research & Management · Vol. 9, Issue 2, 2019 · pp. 12–19 Read article
-
Design and Implementation of Low Power Area Effective 2×4 Decoder for SARM Applications Using 16 nm Technology.
Abstract: This project involves analysis of Modified Mixed Logic Design abbreviated as MMLD which includes following design logics: Complementary Metal Oxide Semiconductor abbreviated to CMOS logic design, Gate Diffusion Input abbreviated as GDI technique, and Dual Value Logic called as DVL. Two logic styles are used in this paper study to reduce power dissipation and delay time which are fourteen 14-transistor and fifteen 15-transistor decoders. Every situation requires the use of …
Published in Journal of Semiconductor Devices and Circuits · Vol. 10, Issue 1, 2024 · pp. 24–36 Read article
-
Development of Primer as a Value Added Product from Waste PET
Abstract: Polyethylene terephthalate was depolymerized by two different chemical recycling techniques i.e. glycolysis and aminolysis. Glycolysis is carried out with Zinc hydroxide and with conventional catalyst i.e. Zinc acetate for the comparable yield of the monomer. Glycolysis is carried out with ethylene glycol whereas aminolysis is done with ethanolamine. Products obtained from both the techniques namely Bis(2-hydroxyethyl) terephthalate (BHET) and Bis(2-hydroxyethyl) terephthalamide (BHETA) have different chemical structure but have hydroxyl functionality …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 3, 2015 · pp. 5–16 Read article
-
Broadband Rectangular Top Shaped Slotted Antenna at 2 GHz for WLAN Application
Abstract: The present study is regarding the design of a broadband rectangular top shaped slotted microstrip antenna with linear polarization radiation. The glass epoxy dielectric material is used for substrate and single rectangular microstrip radiating patch. Rectangular antenna is designed for WLAN technology. We first analyze the characteristics of microstrip antenna and design for the high bandwidth. The results show that the proposed antenna is able to achieve a bandwidth of …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 1, 2015 · pp. 1–4 Read article
-
Performance Analysis of 3T DRAM Using FinFET Based with Leakage Reduction Techniques at 45 nm Technology
Abstract: The proposed area of research is to reduce the power consumption, leakage voltage, leakage current and leakage power of DRAM while maintaining the competitive performance. The Fin FET approach is used in DRAM for high performance. Fin type field effect transistors (Fin FET) are capable substitutes for bulk CMOS at the nano-scale. Fin FET are double gate device. A Fin FET uses an intrinsic body. It greatly suppresses the device-performance …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 2, 2017 · pp. 28–34 Read article
-
Effect of Corrosion on Flexural Strength of Reinforced Concrete Beam: An Experimental Study
Abstract: AbstractThe main aim of this experimental study is to investigate the effect of corrosion on reinforced concrete beams, particularly on load deflection behavior, load carrying capacity and crack width by using with or without epoxy coating on the steel surface. Accelerated corrosion technique was adopted to corrode the beam experimentally. The corrosion was measured using the Open Circuit Potential (OCP) measurement instrument. A total of 14 simply supported beam specimens …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 1–7 Read article
-
Explaining the Cost Performance and Maturity of Transportation Infrastructure in the Developed and Developing World: One Size Fits All?
Abstract: AbstractScholarly text analysing the financial performance of highway projects are evident in the literature, most of which have opined that highway agencies record higher levels of cost overruns compared to other clients of construction and building works. Similar assertions are made about the relatively higher levels of cost overruns recorded on highway projects executed in the developing world. A scant number of seminal works have emerged in the literature, offering …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 33–42 Read article
-
A Study on Strength and Durability of Fly Ash–Metakaolin Blended Geopolymer Concrete
Abstract: Production of cement causes 8% of the total carbon dioxide emissions in the world. Finding a right alternative to cement is the need of the hour, to eliminate environmental pollution caused by cement production. A substitute for conventional concrete can be industrial waste products like GGBS, Flyash, Metakaolin, and so on, these mineral admixtures can be used to fully replace cement with some activators this mix of mineral admixtures and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 51–59 Read article
-
Exploring the Influence of Rice Husk Ash on Compressive Strength: Experimental Investigations in Construction Materials
Abstract: This paper aims to know the effect of rice husk ash on compressive strength 6 molds were collected and laboratory tests were conducted in cooperation with private laboratories in Baghdad Governorate, Iraq. The tests were conducted for a period of 7 and 28 days, where the samples were divided into 1 control and 5 samples distributed on a different percentage from 5% to 25% of the rice husks. The compressive …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 24–28 Read article
-
Report on Traffic Flow Forecasting, as One of the important component of the intelligent transportation system.
Abstract: The interest in smart transportation vehicles stems from the integration of new information systems on the problems caused by traffic accidents and the simulation of realtime real and communication. Traffic is increasing worldwide due to driving, urbanization, population growth and rapid population change. Congestion reduces the efficiency of transportation and increases travel time, air pollution and fuel consumption. Now the development of the road has caused new disasters, caused more …
Published in Trends in Machine design · Vol. 10, Issue 1, 2023 · pp. 25–31 Read article
-
Research Paper On Design Modification Of Dipper Stick Of Jcb 3DX Model
Abstract: JCB’s excavators does various earth moving activities. Practically earth moving activity in them is made by backhoe assembly. In this assembly, the dipper stick is the part which connects the boom with the bucket. The stick provides the digging movement needed to pull the bucket through the ground. There are some problems like dipper stick can’t getting closer to the machine when they’re trenching, questions on their structural rigidity as …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 38–43 Read article
-
Finite Element Modeling of Asphalt Concrete Pavement Reinforced with Geogrid by Using 3-D PLAXIS Software
Abstract: This paper presents an axisymmetric finite element (FE) model to analyze the behavior of unreinforced and geogrid reinforced asphalt concrete pavement subjected to various tire pressures. The model was loaded with an incremental loading from 100 to 600 kPa with 50 kPa increment and the critical pavement responses such as total stress and vertical surface deflection were determined for unreinforced and geogrid reinforced flexible pavement. The results indicated that during …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 12–20 Read article
-
Modelling of Concrete Slab Tensile Stresses for Apron International Al-Najaf Airport
Abstract: The objective of this study was to develop Three Dimensional Finite Element Model (3D-FEM) that can be used to investigate the structural analysis of apron area plain and reinforced concrete slab under Airbus A380-800 aircraft land gear loading. The computer program ANSYS (2014) was selected to develop 3D-FEM for this study. Suggested rigid pavement for apron area was studied with different thickness (20,30, 40 and 50 mm) and Young modululi …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 2, 2016 · pp. 7–18 Read article