Search
1729 articles for “Device to device”
-
Experimental Demonstration on Microfluidic Capillary Flow of Red Dye in Photoresist based Glass Microfluidic Devices
Abstract: In this experimental work, a set of three individual SU-8 based glass microfluidic devices are fabricated by maskless lithography and indirect bonding technique in leakage-free conditions. Commercially available red coloured food dye is used as the selected working liquid. The microfluidic leakage in other set of two leaky microfluidic devices is experimentally demonstrated. Microfluidic devices should be fabricated at leakage-free conditions to achieve exact fluid flow characteristics. The effect of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 1, 2020 · pp. 1–7 Read article
-
Report on Microfluidic Flow of Dyed Working Liquids inside the Polymeric Devices
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is engineered by the maskless lithography and indirect bonding technique. Also, total nine individual polymethylmethacrylate (PMMA) based microfluidic devices are fabricated by maskless lithography, hot embossing lithography, and direct bonding technique. Dyed ethylene glycol, dyed ethanol, and dyed aqueous isopropyl alcohol (50% water, 50% IPA) are prepared and used as working liquids to record each surface-driven microfluidic flow. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 22–29 Read article
-
Organic Material Based Device of VLSI :Solar Cell
Abstract: This focuses on one of the organic material-based devices of VLSI, which is Solar Cell, an electrical device that absorbs and converts the light energy precisely into electricity. This operates through the absorption of light which produces the pairs of electron-hole. After which it operates through the separation of charge carriers of the opposite one and lastly the separation of those carriers originates to a circuit. This covers the overall …
Published in Journal of VLSI Design Tools and Technology · Vol. 9, Issue 3, 2019 · pp. 16–20 Read article
-
Feasibility Studies of the Storage Devices with the Photovoltaic Systems – A Perspective
Abstract: The clean, affordable, and sustainable energy has become a need of an hour and with these requirements, if the options are scanned, the solar photovoltaics tops the chart. The worldwide production of electricity with the use of photovoltaics is increasing day by day and year by year and that too in GW range. India is also adopting practices to enhance its dependency on renewables particularly on photovoltaics and with the …
Published in Trends in Electrical Engineering · Vol. 10, Issue 2, 2020 · pp. 9–13 Read article
-
Analysis of Saturation Power based on Device Structural Parameters of a 1550 nm Symmetrical MQW Semiconductor Optical Amplifier
Abstract: AbstractThis paper presents the effect of device structure parameters on the saturation power of a 1550 nm symmetrical Multi Quantum Well (MQW) Semiconductor Optical Amplifier (SOA) for a small signal amplifier gain of 30 dB. Expressions are given to assess this dependency and the results indicate that saturation power decreases with the increase of the number of wells, well thickness and length but increases with the increase of barrier thickness. …
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 1, 2015 · pp. 13–18 Read article
-
PoE Standards: A Guide to Powering Your Network Devices
Abstract: We summarize in our article about Power over Ethernet and the job of Power over Ethernet (PoE). PoE is a growing industry standard for powering devices that require both a data connection and power using the standard Ethernet cabling. The IEEE 802.3at and 802.3bt specifications permit the layering of up to 90 watts of electricity per network link onto already-installed or future Ethernet cable networks in a secure and reliable …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 10, Issue 3, 2022 · pp. 28–34 Read article
-
Investigation of Electro-optical Characteristic and Structure Optimization of PMMA: Bepq2/BCP/Tpbi Blue Highly Efficient OLED Device
Abstract: In this Investigation, the energy level structure of the Spiro-MeOTAD/PMMA: Bepq2/BCP/Tpbi/LiF OLED has been investigated to explain the method of electron-hole charge carrier pair recombination and the light generation. The Maxwell-Boltzmann statistics model was applied to optimize the structure to reduce the band gap between conductive layers. We found the simulated results J–V, J-Illumination flux, and Current Efficiency (CE) characteristics when we applied forward bias. Inconclusive results determined the threshold …
Published in Journal of Polymer & Composites · Vol. 11, Issue 5, 2023 · pp. 56–68 Read article
-
Study and analysis of the Double Data Rate SDRAM Controller for High-speed Interfacing with Processing Device
Abstract: A real-time embedded system must now manage many programs running concurrently. Increased Data Rate Because of its burst access, speed, and pipeline features, synchronous DRAM is a typical memory-building material. DDR transfers are performed using synchronous dynamic access memory. The memory controller must be set with a pipelined design for various applications and systems to perform effectively. The purpose of this study is to design a DRAM controller that will …
Published in Journal of VLSI Design Tools and Technology · Vol. 14, Issue 1, 2024 · pp. 8–13 Read article
-
NanoLEDs The Next Frontier in Optoelectronic Devices
Abstract: Purpose: This study investigates the advancements in NanoLED technology, particularly focusing on their materials, fabrication techniques, and optoelectronic properties. NanoLEDs hold immense potential in revolutionizing display technologies, yet their commercialization faces several challenges. By addressing the gaps in this area, the study aims to deepen the understanding of NanoLED applications, from high-resolution displays to novel devices in wearable electronics and optoelectronics. Design/Methodology/Approach: The review synthesizes recent innovations in NanoLED development, …
Published in Trends in Opto-electro & Optical Communication · Vol. 14, Issue 3, 2024 · pp. 28–33 Read article
-
Performance Evaluation of Hybrid Polymer Composite Materials for Electromagnetic Interference Shielding in Flexible and Wearable Electronic Devices
Abstract: Wearable electronic devices require novel hybrid polymer composites that offer flexible, lightweight and highly effective EMI shielding characteristics. The development and characterization of flexible polymer composites combining hard magnetic nanoparticles and electrically conductive fillers are explored. The suitability of thermoplastic polyurethane (TPU), polydimethylsiloxane (PDMS) and epoxy resins for use as EMI shielding composite matrices was evaluated in terms of their flexibility, stability and biocompatibility. Hybrid filler systems were developed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 630–648 Read article
-
Aerodynamic Flow Separation Control Using Active Flow Devices
Abstract: Flow separation remains a significant challenge in aerodynamic applications, often leading to increased drag, loss of lift, and reduced efficiency in air and ground vehicles. This study investigates the use of active flow control (AFC) devices to mitigate flow separation and enhance aerodynamic performance. Active methods such as synthetic jets, plasma actuators, and pulsed blowing are examined for their ability to dynamically manipulate boundary layer behavior and delay or suppress …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–7 Read article
-
Artificial Intelligence based Point of Care Device in Advanced Medical Diagnostic Techniques
Abstract: Application of Point-of-Care Testing (POCT) at medical sites provides instant diagnostic results that help doctors make quick decisions for patient care. The traditional point-of-care testing equipment faces restrictions because they test single parameters and experience calibration problems in addition to inefficient data management systems. POCT technology benefits from the integration of Artificial Intelligence (AI) which creates a novel system to solve current operational limitations. The presented study introduces an intelligent …
Published in International Journal of Biomedical Innovations and Engineering · Vol. 3, Issue 2, 2025 Read article
-
Electroactive Graphene–Polymer Nanocomposites for Self-Sustaining and Multifunctional Flexible Devices
Abstract: Graphene–reinforced polymer–composites were developed and systematically investigated to explore their multifunctionality in flexible electronic applications. The study specifically aims to correlate graphene-induced structure–property–function relationships with electroactive performance and self-sustaining behaviour in flexible devices. The hybridization of electroactive polymers—polyaniline (PANI), poly(3,4-ethylenedioxythiophene): polystyrene sulphonate (PEDOT:PSS), and polyvinylidene fluoride (PVDF)—with graphene nanoplatelets enabled simultaneous enhancement of electroactivity, energy-harvesting, and sensing functionalities. Morphological studies confirmed uniform graphene dispersion at 5 wt.% loading, forming continuous …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 260–271 Read article
-
The Analysis of the TEG Peltier Heat Collecting Device in the 1.5 HP Split Unit Air Conditioning System
Abstract: Energy recycling is a different approach to creating a green environment in the modern world. Global energy usage is highest for air conditioning. Commonly air conditioning used to maintain indoor temperature. Split unit air conditioning systems are well-known for their small-area applications in Malaysia. Nevertheless, the condensing unit's heat discharge results in environmental waste. As a result, in this experiment, one peltier device employing a thermoelectric generator (TEG) module was …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 3, 2025 · pp. 14–21 Read article
-
Role of Solid-State Materials in Development of devices for Internet of Medical Things
Abstract: The Internet of Medical Things (IoMT) represents a transformative paradigm in healthcare delivery, integrating connected medical devices, sensors, and wearable technologies to enable real-time patient monitoring and personalized treatment. Solid-state materials form the foundational infrastructure of IoMT systems, encompassing semiconductors, energy storage materials, sensing materials, and flexible electronics. This article explores the critical role of advanced solid-state materials in enabling miniaturization, energy efficiency, biocompatibility, and enhanced sensing capabilities essential for …
Published in International Journal of Solid State Innovations & Research · Vol. 3, Issue 2, 2025 · pp. 11–18 Read article
-
Image-Based Evaluation of Implant Tissue Interface Integrity in Polymer Orthopaedic Devices
Abstract: Polymer orthopedic implants offer radiolucency and mechanical compatibility with bone, but long-term success depends on maintaining a stable implant–tissue interface. Routine imaging is widely available for follow-up, yet interface integrity is commonly judged qualitatively, limiting early detection of fixation compromise and reducing comparability across devices and time points. This work presents an image-based methodology to quantify interface integrity by extracting interpretable interface descriptors from a standardized interface belt around the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 170–179 Read article
-
Experimental Studies on the Capillary Flow Phenomena in Polyimide Based Glass Microfluidic Devices
Abstract: The polyimide based glass microfluidic devices are fabricated using the maskless lithography. Water is the only working liquid in this work. The effects of micropillar side length, microfluidic friction and surface area to volume ratio on the surface-driven capillary flow of water are studied experimentally. The surface-driven capillary flow of water is slower due to higher microfluidic friction. This work will be useful to control the water inside the microfluidic …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 3, 2017 · pp. 22–26 Read article
-
Virtual Fabrication and Analog Performance of Sub-40nm Bulk MOSFET
Abstract: Virtual Fabrication of sub-40nm Bulk MOSFET is carried out under channel engineering and source drain engineering process. These structures enable more aggressive device scaling in nano-scale region because of their ability to control short channel effects. How ever during scaling the junction depth should also be scaled down, which increases parasitic resistance so silicidation technique has been applied to reduce their effects on device. Analog performance has been measured in …
Published in Journal of Electronic Design Technology · Vol. 1, Issue 1-3, 2011 · pp. 34–40 Read article
-
Coastal Steward: Developing an Ultra-Efficient Beach Cleaning Device
Abstract: Car Our project's goal is to create a beach cleaning machine that is both economical and effective in order to lower the expenses and labor involved in using conventional beach cleaning techniques. Our device is easy to transport and operate because it can fit in a car's trunk. Ecofriendliness has been given top priority, and we have made sure that replacement parts are available locally. Our inspiration for this project …
Published in Journal of Mechatronics and Automation · Vol. 10, Issue 3, 2023 · pp. 44–48 Read article
-
Study of DTMF Technology Robot (Bomb Detection Device) without Microcontroller
Abstract: Abstract We observe that the control system is designed to operate a humanoid robot, using DTMF (dual tone multiple frequency) technologies of mobile phones are used for long-range operation. The mobile phone with operator act as a transmitter in the circuit and the one attached to the robot act as a receiver, hence no additional communication devices are required in the circuit network. If any button we pressed using DTMF …
Published in Journal of Microcontroller Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 21–24 Read article