Search
1119 articles for “Performance characterization”
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Design of a Plant for the Production of Ammonia and Urea Using Aspen HYSYS
Abstract: The design of a plant for the production of 1800 MT/Day of ammonia and 1400 MT/Day of urea using aspen HYSYS was carried out in this work. Ammonia is produced through the Haber-Bosch process, where hydrogen and nitrogen react in the presence of a catalyst producing mixture containing ammonia while urea is produced by the reaction between ammonia and carbon IV oxide. In this work, aspen HYSYS, chemical engineering design …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 1, 2022 · pp. 29–44 Read article
-
Studies on two recently commercialized scintillators for gamma-ray spectroscopy and imaging
Abstract: The present work is aimed to study some characteristics of the two recently commercialized CRY18 and CRY19 crystals (Crytur, Cz), namely the elemental compositions, and the suitability of a TiO 2 -based white-pigment as light-reflector around the blind faces of the scintillators. The energy dispersive X-ray fluorescencetechnique has been used for the first goal while the second one has been performed by comparing the emission spectrum of the first crystal …
Published in Journal of Nuclear Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 24–32 Read article
-
Investigation of the Control Parameters in the Machining of Inconel 718 with a carbide tool using Taguchi methodology
Abstract: The main objective of proposed work is to determine the influence of controllable parameters on machining characteristics of Inconel-718 and to achieve the optimum parameters for efficient milling. The Taguchi methodology is adopted for the design of experiments and process optimization. The paper gives an understanding of the different controllable cutting parameters such as cutting velocity, feed rate and depth of cut. It discusses about the carbide tool being used …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 73–76 Read article
-
Enhancing Fire Performance of Steel Reinforcement in RCC Structures: A Comprehensive Investigation
Abstract: The assessment, repair, and rehabilitation of fire-damaged structures have become crucial due to the rise in significant building fires.This particular field necessitates proficiency in various domains including concrete technology, material science and testing, structural engineering, and repair materials and processes. Researchers and developers are currently engaged in extensive efforts to tackle the challenges related to improving the fire resistance of steel reinforcement in reinforced concrete (RCC) structures. These endeavors involve …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 33–40 Read article
-
Nanoparticle Chemistry: The Synthesis, Properties and Applications of Polymer and Macromolecule-Based Nanoparticles and Their Composites
Abstract: Nanoparticles have arisen as a transformative branch of materials in chemistry, owing to their unique physicochemical and biological properties that vary from their bulk materials. Various synthesis techniques, including physical (e.g., laser ablation), chemical (e.g., sol-gel, co-precipitation) and biological (e.g., microbial or plant-mediated) approaches, offer control over particle size, shape and surface characteristics. These methods influence the optical, electronic, catalytic and mechanical properties of nanoparticles. Nanoparticles can exhibit high surface …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1236–1247 Read article
-
Optical and Photocatalytic Activity Of Cmc Capped Zinc Selenide Nanoparticles Under UV Light Irradiation Using Congo Red Dye
Abstract: In this work, we report the, optical, structural morphology and photocatalytic activity of CMC capped zinc selenide nanoparticles, which have been synthesized by hydrothermal method. CMC is acted as capping agent. The nanoparticles were characterized using XRD, SEM with EDAX, AFM, TEM and UV-Vis absorption spectroscopy. The structural properties of nanoparticles have been characterized by X-ray diffraction (XRD) analysis. The XRD patterns show a hexagonal Wurtzite crystal structure. The surface …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 3, 2019 · pp. 25–35 Read article
-
A Study on Strength and Durability of Fly Ash–Metakaolin Blended Geopolymer Concrete
Abstract: Production of cement causes 8% of the total carbon dioxide emissions in the world. Finding a right alternative to cement is the need of the hour, to eliminate environmental pollution caused by cement production. A substitute for conventional concrete can be industrial waste products like GGBS, Flyash, Metakaolin, and so on, these mineral admixtures can be used to fully replace cement with some activators this mix of mineral admixtures and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 51–59 Read article
-
Biomimicry of Eucalyptus Leaf Design for Optimization and Fabrication of Airfoil
Abstract: Biomimicry is the practice of drawing inspiration from natural forms to solve engineering problems, which has become progressively popular for refining design efficiency and performance. This work discovers how biomimicry can be applied to airfoil design, precisely through the unique structure of Eucalyptus leaves, a concept rarely explored in airfoil profiling. The work presented here, focuses on enhancing airfoil designs by incorporating the intricate features of these leaves. The airfoil …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 359–372 Read article
-
Production, Characterization and Toxicological Evaluation of Eco-Friendly Flavolipid Biosurfactant
Abstract: At present majority of surfactants are chemically synthesized. Nevertheless, in recent years, much attention has been directed towards biosurfactants due to their broad range of functional properties, there are cheaper as they can be produced from alternative sources. They have applications in the fields, such as: oil recovery process, as an additive in food processing industry, pharmaceuticals preparations, energy saving technologies etc. As they are being microbial derivatives, it is …
Published in Research and Reviews: A Journal of Toxicology · Vol. 4, Issue 1, 2014 · pp. 16–21 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Optimum Setting of Distance Protection Scheme for HV Transmission Line
Abstract: Protective relays in a power system are used to detect system abnormalities and to execute appropriate commands to isolate swiftly only the faulty component from healthy system. One of the protective relay is the distance relay. When the fault occurs it is seen that large amount of current flows through the network. The distance relay detect the over current by measuring the impedance of the transmission line and send the …
Published in Journal of Power Electronics and Power Systems · Vol. 3, Issue 2, 2013 · pp. 23–36 Read article
-
Tribological Characteristics of Dental Crowns
Abstract: Dental tribology is an emerging field that focuses on improving the design and material choices for artificial dental systems. This paper looks at different dental crown materials, their clinical efficacy and the consequences of tribological wear on teeth due to interfacial movement. Ceramics are commonly utilized in fixed dental restorations because of their superior mechanical and cosmetic qualities, which include exceptional fracture resistance and clinical endurance. Ceramic crowns, often used …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 550–559 Read article
-
Scholarly Communications of Annamalai University on Web of Science in Global Perspective: A Scientometric Assessment
Abstract: Annamalai University has a prolific research output spanning various fields such as agriculture, medicine, engineering, humanities, and social sciences. With state-of-the-art facilities and dedicated faculty, the university consistently produces impactful research findings that contribute to advancements in knowledge and address societal challenges. Its research endeavors are characterized by innovation, interdisciplinary collaboration, and a commitment to excellence, making Annamalai University a significant hub for cutting-edge research in India and beyond. The …
Published in Journal of Advancements in Library Sciences · Vol. 12, Issue 3, 2025 · pp. 1–10 Read article
-
Principal Component Analysis Based Dominant Features Selection Method for Speaker Identification
Abstract: Cepstrum based features are mostly used in speaker identification. Mel-frequency cepstrum coefficients (MFCCs) and their statistical properties (skewness, kurtosis and standard deviation) are used in this paper for text-dependent speaker identification. Principal component analysis (PCA) is employed to select the dominant feature vector representing the speaker characteristics. Multi-layer neural network is used as the classification engine. There occurs the inter-speaker variation of speech length uttering the same word. The feature …
Published in Current Trends in Signal Processing · Vol. 1, Issue 1-3, 2025 · pp. 33–45 Read article
-
Numerical Simulation and Characteristics Assessment of SPWM Based Permanent Magnet Motor Drive for Electrical Vehicle Applications
Abstract: In recent years, electric vehicles (EVs) have grown in popularity as the most practical alternative for helping to protect the environment and achieve great energy efficiency in transportation. Traction motors are the primary source of propulsion in electric vehicles. Excellent torque and power density, a wide speed range, high efficiency, and high dependability are all requirements. The most promising possibilities, which have been widely employed for EV (or hybrid EV) …
Published in Recent Trends in Electronics Communication Systems · Vol. 9, Issue 1, 2022 · pp. 36–53 Read article
-
Evaluation of Crystallinity in Talc/Poly-styrene Composites by using FTIR and XRD
Abstract: Over the decade, polymers have found their usage in almost all types of industries ranging from food and beverage packaging to automobile industries. Though the polymers are considered highly inert and chemically stable, their performance under mechanical loading is not at par with their metallic counterparts. Thus, polymer composites have started gaining popularity over the years, but their properties are poorly understood. In this study, the effect of talc addition …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 10–16 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Dynamic Analysis of Irregular Building with Box Type Shear Wall at Center under Different Type of Soil
Abstract: Building engineers are being shown to accept High rise construction due to increase shortage and land cost. The development of high-rise buildings presents many challenges with the type of lateral load. In High rise buildings getting better efficiency and the high-strength shear wall is an effective solution. The Optimum location of the shear wall depends upon the structural shape of buildings. For irregular structures, inner shear walls provide more strength …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Development of an Innovative Nanotransdermal Formulation Utilizing an Optimal Combination of Acyclovir and Omeprazole to Improve Antiviral Efficacy
Abstract: The study effectively created nanogel formulations of Acyclovir and Omeprazole using the solvent diffusion technique. Among the various formulations (F1–F9), F9 was identified as the most suitable for gel preparation based on its pH evaluation. Drug content analysis, performed using UV-spectroscopy, confirmed the homogeneity of the prepared nanogels, which appeared opaque, free of lumps, particles, or aggregates. The spreadability assessment of F9 demonstrated excellent spreadability, while viscosity values for all …
Published in International Journal of Biomedical Innovations and Engineering · Vol. 2, Issue 1, 2024 · pp. 19–35 Read article