Search
1292 articles for “maxims”
-
DEM Simulation of Macro and Micro-Scale Behavior of Granular Materials during Loading and Unloading
Abstract: The present paper aims at comparing the simulated stress-strain behavior of granular materials quantitatively with the experiment and exploring the evolution of the micro-scale behaviors during loading and unloading using the discrete element method (DEM). A numerical sample consisting of 9826 randomly generated spheres similar to the experiment was prepared. The numerically prepared isotropic sample was subjected to loading and unloading under strain controlled condition. It is noticed that the …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 1, 2022 · pp. 26–38 Read article
-
Design and Performance Analysis of Full Adder Cell using FinFET Technique at 32nm Technology
Abstract: AbstractIn this paper, discussed is the comparative analysis of complementary MOS (CMOS) and dual gate-FinFET (fin shaped field effect transistor) based full adder cell design. To reduce the average power, average current and maximum current of 1-bit full adder circuit a new high DG-FinFET technique is presented. Use of double-gate FinFET technology provides low leakage and high performance operation. For MOSFET transistor model, a predictive technology model (PTM) BSIM4 and …
Published in Journal of Microelectronics and Solid State Devices · Vol. 4, Issue 3, 2017 · pp. 1–8 Read article
-
Role of Filler-Polymer Interface on the Thermal Conductivity in Polymer Composites
Abstract: Polymers with high thermal conductivity are the need of modern technologies due to their robustness, cost-effective, and less corrosiveness. However, bare polymers are not good heat-conductors due to their molecular structures, and their non-metallic properties. Therefore, metallic fillers of different shape and size have been used to enhance the thermal conductivity in polymer-composites. However, there has been search of best geometrical fillers which can maximize the thermal conductivity effectively with …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 53–70 Read article
-
Real-time Gas Lift Valve to Enhance Well Performance
Abstract: Optimum production from a gas lift well mainly depends on proper injection gas quantity; injection pressure and depth of injection and gas lift valve performance. The quality of down hole gas lift valves plays a crucial role in achieving maximum efficiency of a gas lift system and uninterrupted oil and gas production. Gas lift valves can aid in the unloading and produce of a well. With the valves properly spaced …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 1–10 Read article
-
Development of a Soft Computing-Based Island Detection System and Performance Analysis
Abstract: There has been an overestimation of the global energy consumption in the last few years. Distributed Generators are being propelled forward by the motivation provided by the absence of suitable transmission capacity, exaggerated transmission and distribution mishaps, and the release of power marketing (DGs). It's a distributed age unit (DG slash hack expansion) and regional units linked to distribution that power the system, which has yet to have hundreds of …
Published in Journal of Semiconductor Devices and Circuits · Vol. 8, Issue 3, 2021 · pp. 1–15 Read article
-
Performance analysis and implementation of 89C51 controller Based Solar Tracking System with Boost Converter
Abstract: Among the top issues in the modern day is electricity consumption minimization. Particularly in lighting purposes, electricity consumption minimization mode consumes 20% or so of all electricity produced. Often these conventional light bulbs have already been substituted by LEDs, which is an effective technique to cut energy use. The basic solar energy conversion element, the solar panel, is set at a specific angle and is unable to monitor the position …
Published in Journal of VLSI Design Tools and Technology · Vol. 12, Issue 2, 2022 · pp. 34–41 Read article
-
Reservoir Operation Using Particle Swarm Optimization
Abstract: Ideal operation of the reservoir is thoughtful in the current circumstances of water deficiency being faced by the country, due to perceivable universal increase in the water demand for numerous requirements. Water resources projects required enormous funds, money and manpower to reach the desired objective and operate the reservoir in best way a reservoir operation is needed. Depending upon reservoir characteristics and need of surrounding area it is required to …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 3, 2018 · pp. 1–7 Read article
-
Influence of Pedicellus Melon on the Nasal Mucosa, Chronic Rhinitis and Allergic Rhinitis
Abstract: Aims: We aimed to find out the local effect and acting time of Pedicellus melon on the nasal mucosa of rabbit and to evaluate the effect of Pedicellus melon for chronic rhinitis and allergic rhinitis after establishing therapeutic method. Material and Methods: The material is powder which is made from unripped-stalk of cucumis melon harvested on July. We analyzed concha nasal mucous of rabbits and rats treated with powder of …
Published in Research and Reviews: A Journal of Medicine · Vol. 12, Issue 1, 2022 · pp. 8–12 Read article
-
Quality Appraisal for the Ornamental Bird, Fish, Dog, and Cat Foods Available in Bangladesh
Abstract: The study aimed to assess if the chemical composition of different avian, aquatic, dog, and cat foods commonly available in Chattogram, Bangladesh adheres to the recommended standards. Food samples were collected and subjected to proximate analysis for the dry matter (DM), crude protein (CP), crude fibre (CF), ether extract (EE), nitrogen free extract (NFE), and total ash (TA). The plant seeds used for ornamental birds exhibited substantial variability in terms …
Published in Research and Reviews : Journal of Veterinary Science and Technology Read article
-
Formability analysis of steel and copper based alloy sheet by using Erichsen Cupping Test Machine
Abstract: Metallic material formability study is critical in a variety of industrial areas, including automotive, aerospace, and manufacturing. The present study aims to investigate the formability properties of steel and copper-based alloy sheets using the Erichsen cupping test machine, an established technique for evaluating sheet metal formability. The process involves manufacturing identical steel and copper-based alloy specimens and subjecting them to the Erichsen cupping test. The test determines the maximum deformation …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 49–57 Read article
-
PARAMETRIC ANALYSIS OF ENERGY SAVING IN BUILDING WALLS BY APPLYING VARIOUS INSULATION MATERIALS
Abstract: The parameters which include Present Worth Factor, the wall structure, thermal conductivity of insulation material, thickness of insulation and the heating /cooling load of building, affect the energy savings in buildings. This study focuses on parametric analysis of the energy savings for building walls by using insulations (Expended Polystyrene and Glass wool). The annual energy requirements of house have been obtained by heating Degree-Days (DD) concept. For economic analysis, the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 113–118 Read article
-
Computational Analysis of Non-Newtonian Blood Flow through Bifurcated Coronary Artery: Insights into Hemodynamics and Wall Shear Stress
Abstract: This abstract presents a study on the computational fluid dynamics (CFD) simulations of blood flow through a bifurcated coronary artery using non-Newtonian fluid model. The objective of this study is to investigate the hemodynamic characteristics in Bifurcated Coronary artery. The methodology involved the utilization of ANSYS SpaceClaim software for creating a geometric model of the bifurcated coronary artery. A mesh independent study was conducted to ensure the accuracy and reliability …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 160–168 Read article
-
Effect of Vermicompost, Compost and Inorganic Fertilizer on Production of Onion at Southern Ethiopia, Wolaita Zone Humbo District
Abstract: Combined application of fertilizers (organic and inorganic) could able to optimize production and productivity of onion. This experiment was conducted in Humbo district southern Ethiopia during 2019- 2021 under irrigation to evaluate the effect of organic and inorganic fertilizer on bulb yield and general production of onion. Experiment was laid out in randomized complete block design with three replication and consisted of seven treatments: T1: control, T2: NPSB(82.2N, 31.4P, 13.4S, …
Published in Research & Reviews : Journal of Botany · Vol. 13, Issue 1, 2024 · pp. 31–39 Read article
-
Performance Analysis of Diesel Engine Using Hemp Biodiesel, Butanol and Diesel Fuel Blend
Abstract: The present study evaluates the possibility of using Hemp oil blended with Butanol (C4H9OH) & conventional diesel as an alternative fuel. Biodiesel is generated from hemp oil by transesterification. Hemp biodiesel is blended with conventional diesel & Butanol in distinct proportions such as B10 (10% hemp biodiesel+ 90% conventional diesel), B10Bu10 (10% hemp biodiesel+ 10% butanol+ 80% conventional diesel), B10Bu20 (10% hemp biodiesel+ 20% butanol+ 70% conventional diesel), B20 (20% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 178–187 Read article
-
Kinetics of Soil Contaminant Degradation Enhanced by Jatropha Tanjorensis Leaf Bio-Stimulant
Abstract: The data obtained from the experiment show a high viability of the plant extracts in the biodegradation process, the maximum specific rate was determined. Also, application of Michael Menten’s equation were also applied, the maximum dissociation rate constant was obtained from lineweaver bulk plot, for both sun-dried and room dried at 100 g of CPED and CPEL as RMAX to be 1000 ppmday-1 and 555.55 ppmday-1 whereas KPTH 3190.16 ppm-1 …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 1, 2024 · pp. 01–06 Read article
-
Erthquake Response of Shear Wall Integrated Step-Back Set-Back Structures on Sloped Ground
Abstract: The study examines how well step-back set-back structures perform seismically when they are resting on a 27° slope in terms of base shear, maximum story displacement, story drift, and time period. Shear walls 200 mm thick are positioned at various points. The seismic performance of the square plan structure having shear wall at corner locations is presented in this study. The study's findings indicate that the shear wall's position affects …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 2, 2024 · pp. 22–31 Read article
-
Biokinetics of Retention and Dose Delivery to Body Organs due to Protracted Ingestion of Natural Uranium in Groundwater of Patiala District, Punjab, India
Abstract: This study pertains to the uranium concentration in the drinking water and its biokinetics of the retention and dose delivered to body organs of the residents of 50 villages of the Patiala district of the Punjab State where U content is higher than the safe limit of 30 ppb fixed by WHO. U content values vary from 38.0 µg/L (Uppli) to 267.0 µg/L (Ahru Kalan) with an average value of …
Published in Research and Reviews: A Journal of Toxicology · Vol. 14, Issue 3, 2024 · pp. 1–15 Read article
-
Optimizing Heat Transfer Performance in CO2 Finned-Tube Gas Coolers: A Comparative CFD Study of Design Variations
Abstract: Computational fluid dynamics (CFD) simulations and mathematical analysis are used in this study to examine the heat transfer efficiency of CO2 fined tube gas coolers. To maximize heat transfer efficiency, CFD simulations were carried out on a variety of gas cooler designs with variable fin geometry, including offset strip fins, using the ANSYS Fluent program. Under the baseline design, there was a finned tube cooler measuring 610 mm in length, …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 3, 2024 · pp. 1–13 Read article
-
Analyzing Cavitation in Marine Propeller: A Computational Approach with Consideration for Polymer Applications
Abstract: A major source of noise and blade damage in marine propellers is because of the phenomenon of hydrodynamic cavitation. The Computational Fluid Dynamics (CFD) analysis approach is employed for the prediction of the cavitating propeller’s performance characteristics under various conditions of operation with the advance coefficient (J) ranging from 0.55 to 0.91 and cavitation number (σ) in the range of 0.80 to 4.50. The numerical simulation is performed on INSEAN …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 29–44 Read article
-
Solar Panel Maintenance and Prevention System
Abstract: Solar energy has emerged as a sustainable and efficient alternative to conventional energy sources. However, maintaining solar panels is crucial to ensure optimal performance and longevity. Accumulation of dust, dirt, and environmental debris can significantly reduce energy efficiency, leading to increased operational costs and potential system failures. To overcome this issue, we suggest an IoT- based Solar Panel Maintenance and Prevention System that facilitates automated cleaning and preventive maintenance via …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 2, 2025 · pp. 29–34 Read article