Search
734 articles for “SURF”
-
Quantitative Image-Based Assessment of Degradation Patterns in Polymer-Based Medical Implants
Abstract: Polymer-based medical devices are widely used in clinical practice, where long-term material degradation can compromise performance and patient safety. Traditional polymer degradation studies predominantly rely on laboratory-based experiments, which often fail to capture real-world operational and usage conditions. In this study, a multimodal, data-driven framework is proposed for the quantitative assessment of degradation patterns in polymer-based medical devices using publicly available clinical failure data. Structured operational parameters, including cumulative usage …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1510–1518 Read article
-
Thermo-Hydraulic Enhancement of Annular Finned Shell-and-Tube Heat Exchangers Using Epoxy-Based Polymer Composites: A Material–Geometry Coupled CFD Investigation
Abstract: Shell-and-tube heat exchangers remain a backbone of industrial thermal systems, yet their performance is often limited by relatively low shell-side heat transfer and the weight and cost associated with conventional metallic components. In this context, the integration of polymer composite materials offers a promising pathway toward lightweight, corrosion-resistant, and performance-tunable heat exchanger designs. The present study investigates the thermo-hydraulic performance of a straight-tube shell-and-tube heat exchanger equipped with annular fins, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 669–684 Read article
-
Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis
Abstract: This study investigates the conversion of human and cattle (goat and cow) teeth into bioactive hydroxyapatite-based composites and presents a detailed comparative evaluation of these biogenic materials with laboratory-synthesised (synthetic) hydroxyapatite (HAp). In this work, hydroxyapatite was extracted from human and bovine teeth through controlled calcination and milling, while synthetic HAp was prepared using a standard wet chemical precipitation route. All materials were subsequently sintered at 900 °C and fabricated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 340–354 Read article
-
Evaluation of Anti-cataract Potential of Carbocisteine by Using In Vitro Goat Lens Model
Abstract: This study includes Carbocisteine has four Oxygen molecules, one Sulfur molecule, and one Nitrogen molecule. Goat eyeballs were used in the present study. They were obtained from the slaughterhouse. Glucose at a concentration of 55 mM was used to induce cataracts; glucose (5.5 mM) concentration served as a normal control, and Ascorbic Acid served as a standard control. Incubation of lenses with glucose 55 mM showed opacification starting after 8 …
Published in Research and Reviews: A Journal of Pharmacology · Vol. 16, Issue 2, 2026 Read article
-
Comparative Analysis of the Structural Integrity and Dimensional Stability of Additively Manufactured Biopolymers vs. Thermoformed PETG: A 1-Year Retrospective Study on Polymer Performance in Orthodontic Applications
Abstract: Objective: This study aimed to evaluate the long-term dimensional accuracy and structural performance of direct 3D-printed biopolymers compared to conventional vacuum-formed Polyethylene Terephthalate Glycol (PETG) composites. The investigation focused on how different polymer processing methods (additive manufacturing vs. thermoforming) influence material thinning and resistance to occlusal stress. Methods: A retrospective analysis was conducted on 60 cases (n = 60) of post-orthodontic maintenance. The sample was divided into two cohorts: Group …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 140–146 Read article
-
Polymer Composite-Supported Jackfruit Peel Adsorbent for Enhanced Copper (II) Removal from Wastewater: Batch Equilibrium and Isotherm Analysis
Abstract: The increasing concern of disposal of copper-containing effluents into the environment has led to heightened interest in designing cost-effective, eco-friendly and scalable adsorbent systems. Traditional metals and synthetically engineered sorbents prove to be effective; however, these systems are energy intensive. Agricultural residues entrapped in polymer composite systems constitute an economically feasible solution to this environmental challenge. This work reports on the design, characterization and performance evaluation of an economical adsorbent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 375–390 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
Structural Optimization of FDM-Processed ASA Polymer Frames through Acetone Solvent Welding, Variable Infill Strategy, and Layer Orientation: Experimental Validation via Quadcopter Flight Testing
Abstract: Acrylonitrile styrene acrylate (ASA) is an amorphous terpolymer with superior UV resistance compared to acrylonitrile butadiene styrene (ABS), as its acrylate rubber phase lacks photodegradation-prone carbon–carbon double bonds. This study proposes acetone solvent welding as a polymer joining method to produce monolithic structures from FDM-processed ASA components, addressing three processing challenges: achieving structural continuity through polymer chain interdiffusion at solvent-wetted interfaces, correcting thermal warping via post-print geometric correction during welding, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 689–703 Read article
-
Upgrading Nutritive Value of Rice Straw: Processing, Supplementation, and Agronomic Innovations for Improved Utilization
Abstract: Rice straw, a major byproduct of rice production, holds significant potential as a livestock feed but is constrained by its high lignocellulosic content, low crude protein, and poor digestibility. Enhancing its nutritive value is imperative for sustainable livestock production. This study explores a range of innovative strategies aimed at improving rice straw’s digestibility and overall nutritional quality. Physical processing techniques, including chopping, grinding, soaking, and steam treatment, enhance its surface …
Published in Research & Reviews : Journal of Botany · Vol. 15, Issue 1, 2026 · pp. 42–58 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
IoT-Enabled Self-Monitoring Polymer Composites for Solar Facade Systems with Cloud-Based Thermal Analytics
Abstract: The increasing demand for intelligent and energy-efficient building systems has hastened the production of smart solar facade systems. This paper presents an IoT-based self-monitoring polymer composite system, which includes thermal analytics running on the cloud to provide real-time assessments of the performance of the facade. The artificial composite panel has sensing capability built in which the material is able to measure both surface and internal thermal behavior simultaneously in dynamic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 657–681 Read article
-
Time Multiplexed Binary Offset Carrier (TMBOC) Transmitter with Polarimetric Interferometric Synthetic Aperture Radar (Pol-InSAR)
Abstract: This paper provides insights into Time Multiplexed Binary Offset Carrier (TMBOC), a modulation technique employed in satellite navigation systems, specifically designed for GPS L1C. TMBOC improves signal correlation properties by time-multiplexing Binary Offset Carrier (BOC) (1, 1) and (6, 1). The text discusses various TMBOC models, including spectral representations and power distributions. Performance analysis reveals the potential of TMBOC signals in achieving superior tracking accuracy and interference resistance compared to …
Published in International Journal of Satellite Remote Sensing · Vol. 4, Issue 1, 2026 · pp. 34–49 Read article
-
An AI-Driven IoT Framework for Autonomous Quality Assurance in Optical Lens Manufacturing
Abstract: The evolution of high-precision optics—ranging from smartphone micro-lenses to high-end astronomical glass—demands unprecedented accuracy in manufacturing. Traditional inspection methods, reliant on manual sampling or static automated optical inspection (AOI), often fail to bridge the gap between high-speed production and the detection of microscopic surface aberrations. This paper introduces an integrated architecture combining the Internet of Things (IoT) and Deep Learning-based decision-making systems to revolutionize lens quality control. By deploying an …
Published in International Journal of Optical Innovations & Research · Vol. 4, Issue 1, 2026 · pp. 36–41 Read article
-
Recent Development to Track Contraband using Muon
Abstract: The muon is one of nature’s fundamental particles discovered in 1937 by Carl Anderson. A muon is an elementary subatomic particle similar to electron, but with a mass approximately 207 times greater and, sometimes it is called as a “heavy electron”. Muons are generated naturally when cosmic rays collide with atoms in earth’s upper atmosphere and, then raining down all the times upon the surface of earth. Muons can be …
Published in International Journal of Universe · Vol. 2, Issue 1, 2026 · pp. 23–34 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Total-internal-reflection-based optical rotation quasi-phase-matching for efficient second-harmonic generation in Cadmium Germanium Arsenide crystal
Abstract: This study investigates a total-internal-reflection (TIR)-based optical rotation quasi-phase-matching (ORQPM) approach for second harmonic generation within a cadmium germanium arsenide crystal slab. The crystal is coated with a thin film of yttrium oxide to facilitate precise control over phase shifts between p- and s-polarized light upon reflection at the slab-film interface. By leveraging the interplay between TIR- induced optical rotation and fractional QPM effects at designated bounce points, the configuration …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 Read article
-
GSM Based OTP Security Locker Using Arduino
Abstract: This work presents a microcontroller-driven secure locker system that leverages GSM-based communication for dynamic user authentication. Unlike conventional locking mechanisms that depend on static credentials or physical keys, the proposed system utilizes a time-sensitive one-time password (OTP) transmitted to a pre- authorized mobile number. The authentication workflow is managed using an Arduino-based embedded platform integrated with a SIM A7670C GSM module. The system coordinates OTP generation, transmission, and validation in …
Published in Journal of Microcontroller Engineering and Applications · Vol. 13, Issue 2, 2026 Read article
-
Development of Compact RF Filters for Modern Wireless Communication Systems
Abstract: Modern wireless communication systems such as 5G, 6G, Internet of Things (IoT), satellite communication, radar systems, and smart wireless networks require compact and highly efficient RF filters for reliable signal transmission and interference suppression. RF filters are important components that allow desired frequency signals to pass while rejecting unwanted frequencies and noise. With the rapid growth of wireless devices and limited spectrum resources, the demand for miniaturized, low-loss, multi-band, and …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 2, 2026 Read article
-
Preparation and Characterization of Clay-Based Hybrid Membranes for Antibacterial Biodegradable Polymer Wound Dressings
Abstract: Recent developments in the field of polymer chemistry have resulted into many new forms of Hybrid polymer. This has further revolutionized the application of polymer chemistry in numerous fields. In this research, we manufactured clay-based hybrid membrane by adding clay to the biodegradable matrix of chitosan polymer. It is widely known that microbial and pathogenic organisms are being responsible for wound hampering infections such as impetigo. They can spread in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Formulation and Evaluation of Golden Heart’s Tooth paste of Piper Betel
Abstract: Toothpaste is a multifunctional oral care product composed of abrasives, surfactants, fluoride-based anticaries agents, and pH buffers. Herbal toothpaste formulations have gained significant attention for the treatment of gingivitis, an inflammatory disease of the gums. Generally, toothpaste formulations maintain a pH range of 5–6 to ensure stability and compatibility with the oral environment. Traditional medicinal plants have long been used by communities for oral healthcare due to their antimicrobial and …
Published in Research & Reviews: A Journal of Pharmacognosy · Vol. 13, Issue 2, 2026 Read article