Search
1964 articles for “5” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article
-
Sustainable Development of Carbon–Sisal Reinforced Polyester Composites through Green Nanotechnology
Abstract: This study presents the sustainable development of carbon–sisal fiber reinforced polyester composites enhanced through green nanotechnology for improved mechanical performance and environmental compatibility. The hybrid composites were fabricated using varying fiber ratios - C1 (70% carbon, 30% sisal), C2 (60% carbon, 40% sisal), and C3 (50% carbon, 50% sisal) - with an optimized addition of 1 wt.% nano-silica (SiO2) synthesized via a green sol–gel route. The tensile, flexural, and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1179–1194 Read article
-
The Weight of The Flock: Narratives of Young Men who were Childhood Herders in Lesotho
Abstract: Herding in Lesotho is associated with social isolation for extended periods, risk of assault by animal thieves, and risk of being attacked for suspected animal theft. Regardless, herding in Lesotho is mostly assigned to boys. The objective of this study was therefore to examine herding experiences of childhood herders in Thaba Tseka Lesotho. The study employed snowball sampling to recruit 14 childhood herders who were young adults (18-35 years old) …
Published in International Journal of Children · Vol. 3, Issue 1, 2026 · pp. 29–42 Read article
-
Physicochemical Analysis of Oil Extracted from Raphia Sudanica Fruit Sold in Edu Local Government Area of Kwara State, North Central Nigeria
Abstract: Raphia sudanica, commonly called Raphia hookeri or bamboo palm fruit, is one of the most valuable species among known palm fruits found in Nigeria and is widespread in major parts of West Africa. In this study, oils extracted and analyzed from Raphia sudanica fruits (pulp and seed) revealed the respective physicochemical values; acid value (5.56, 6.10 mgKOH/g), peroxide value (2.44, 5.82 Meq/kg), iodine value (41.30, 68.10 gI₂/100 g), saponification value …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 67–75 Read article
-
Design and Performance Evaluation of A Refrigeration System Utilizing The Peltier Cooling Effect
Abstract: A domestic refrigerator with 5star rating and having capacity 180 Liters consumes 265 units per year. In India average cost of electricity consumption per unit for domestic usage up to 100 units is Rs 5.31per Unit and beyond 300 units it is Rs.8.95 and for industrial it may go beyond Rs 10.45/kWh. This scenario demands for alternative cooling technology that can replace totally VCR (vapour compression refrigeration) system. This thesis …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 1, 2026 · pp. 34–47 Read article
-
Effect of Thermal Conditions on Microstructure and Mechanical Properties of AA5083 Processed by Equal Channel Angular Pressing
Abstract: A commercial AA5083 with an initial grain size of 210 μm was given an ultrafine-grained structure using the equal channel angular pressing (ECAP) technique under die design as patented. The identical sample underwent two successful passes through the die at 473 K, with each passage causing the sample to rotate 90° along its own longitudinal axis. After just one pressing, the microstructure was comparatively homogeneous. It was made up of …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 49–64 Read article
-
Polymer Composite-Enhanced Anaerobic Digestion of Kitchen Waste for Optimised Biogas Production: Process Design, Parametric Study, and Simulation Analysis
Abstract: There is an urgent need for decentralised sustainable biogas production from organic waste due to the rising amount of food waste in cities. The application of polymer composite material including HDPE tanks, PVC pipes, and FRP secondary containment systems presents a promising option compared to conventional MS digester fabrication in terms of durability, excellent thermal insulation capability, light weight, and easier installation. This study explores the possibility of adopting a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 803–818 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Interfacial Performance and Structural Stability of Repaired vs. Replaced Polymer-Based Composites: A 3-Year Retrospective Analysis of 'Patch-up' Restorative Engineering
Abstract: Objective: This retrospective study aimed to evaluate the clinical longevity and interfacial success of repairing aged polymer-based composites versus complete replacement, focusing on the integration between the existing polymer matrix and the new restorative material. Materials and Methods: A retrospective clinical audit was conducted on 50 cases (n = 50) of posterior restorations with localized defects. The sample was categorized into: Group A (n = 25), where defective sites were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 180–187 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Formulation and Evaluation of a Polyherbal Lip Scrub Containing Beetroot, Licorice, and Aloe Vera
Abstract: The current research is aimed at developing and assessing a polyherbal lip scrub which contains beetroot extract, licorice extract and aloe vera gel to enhance better exfoliation, nutritional and depigmentation. The fusion method was applied to the herbal extract formulations by varying systematically the concentration of the herbal extracts to develop the 4 formulations (F1-F4) each of 15 g. These prepared formulations were tested on their important physicochemical and functional …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 2, 2026 · pp. 47–55 Read article
-
Formulation and Evaluation of Golden Heart’s Tooth paste of Piper Betel
Abstract: Toothpaste is a multifunctional oral care product composed of abrasives, surfactants, fluoride-based anticaries agents, and pH buffers. Herbal toothpaste formulations have gained significant attention for the treatment of gingivitis, an inflammatory disease of the gums. Generally, toothpaste formulations maintain a pH range of 5–6 to ensure stability and compatibility with the oral environment. Traditional medicinal plants have long been used by communities for oral healthcare due to their antimicrobial and …
Published in Research & Reviews: A Journal of Pharmacognosy · Vol. 13, Issue 2, 2026 · pp. 43–61 Read article
-
Design and Evaluation of Thermo-Responsive Poly(N-isopropylacrylamide)-Based Polymeric Nanoparticles for Temperature-Triggered Intratumoral Release of Doxorubicin in Solid Tumors
Abstract: Thermo-responsive polymeric systems have emerged as promising platforms for targeted intratumoral drug delivery in cancer therapy. This study aimed to develop and evaluate poly(N-isopropylacrylamide) (PNIPAM)-based polymeric nanoparticles as intelligent carriers for temperature-responsive delivery of doxorubicin (DOX) to solid tumors. Nanoparticles were synthesized via free radical polymerization using N-isopropylacrylamide as a thermoresponsive monomer and N,N′-methylenebisacrylamide as a crosslinker, forming a stable network with a tunable lower critical solution temperature (LCST).The optimized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 159–168 Read article
-
Artificial Intelligence and Edge Computing in Oil and Gas: Applications, Architectures, and Operational Realities
Abstract: Artificial intelligence has arrived in oil and gas, and unlike some previous waves of digital enthusiasm in the sector, this one is sticking. Saudi Aramco analyses approximately 10 billion data point every day and reported USD 4 billion in technology-driven operational gains in 2024. ExxonMobil uses AI to increase shale well output by more than 5 percent. Shell has deployed machine learning across more than 10,000 assets using C3.ai to …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 01–06 Read article
-
Determining Fertility Status of soil at Different land uses at Koka Watershed Tembaro Woreda, Central Ethiopian
Abstract: The study was conducted in Central Ethiopia, Tembaro Woreda, for two consecutive years, 2023 and 2024, at Bohe and Bachira Kebeles within the Omo River Basin in the Koka watershed. The objectives of this study were to determine the fertility status of different land uses at the study sites. The study results indicate that soil at the study site ranges from moderately acidic to slightly acidic, with low to moderate …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 15, Issue 2, 2026 · pp. 10–17 Read article
-
A Survey on Hydrogen Storage System using Composite Material and its Alloys
Abstract: The transition to a carbon-neutral energy landscape hinges on the ability to store hydrogen safely, densely, and reversibly. While high-pressure tanks and cryogenic vessels dominate today’s infrastructure, solid-state storage in metallic alloys offers a compelling alternative by combining high gravimetric capacity with intrinsic safety to form a composite material. This work presents a systematic investigation of a family of reversible hydrogen-absorbing composite material alloys—principally Mg-based intermetallics (Mg₂Ni, MgFeMn) and TiV-based …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 28, Issue 2, 2025 · pp. 35–42 Read article
-
Investigation on mechanical performance of 3D printed PLA-Kraft Lignin composites
Abstract: Bio-based polymer composites are becoming more popular due to the growing need for sustainable and biodegradable materials in additive manufacturing. PLA-kraft lignin composites were created and their mechanical performance in fused deposition modeling (FDM) applications was assessed in this work. Polylactic acid (PLA) was mixed with Kraft lignin, a sustainable by-product of the paper industry, at weight percentages of 0%, 1%, 3%, 5%, and 7%. Melt blending was utilized to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1002–1015 Read article
-
Vector-Borne Disease Risk Assessment Among Households: A Cross-Sectional Epidemiological Investigation
Abstract: The study was conducted to assess the risk of vector-borne diseases among households of the selected ward of Athirampuzha Panchayath, Kottayam. Objectives of the study were to assess the percentage of houses infested with larvae or pupae of mosquito (house index (HI): total number of positive houses/total houses × 100), to identify the percentage of water holding containers infested with larvae or pupae of mosquito (container index (CI): total number …
Published in International Journal of Evidence Based Nursing And Practices · Vol. 4, Issue 1, 2026 · pp. 15–18 Read article