Search
653 articles for “Nano applications”
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Secure Data Processing and Transmission Using Machine Learning Techniques
Abstract: The amount of data created by smart devices has drastically increased in recent years as a result of the quick technological improvements in those devices and their use in a variety of applications. As a result, the big data (BD) created by various devices may be too much for typical data analytics tools to handle. However, this exponential expansion of data provides numerous types of attackers with new chances to …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 9, Issue 3, 2022 · pp. 22–30 Read article
-
Development of Multilayer Metallic Coatings with Graded Interfaces for Enhanced Wear and Fatigue Resistance in Aerospace Components
Abstract: This study presents a comprehensive investigation into the development and characterization of multilayer metallic coating systems with compositionally graded interfaces, specifically engineered to enhance wear and fatigue resistance in aerospace structural and rotating components. Four coating architectures were systematically designed: (i) CrN/TiAlN bilayer, (ii) TiN/TiAlN/TiAlSiN gradient trilayer, (iii) CrAlN/AlCrN nanolaminate, and (iv) a novel five-layer CrN–TiN–TiAlN–AlCrN–TiAlSiN functionally graded system (FGS). Coatings were deposited via high-power impulse magnetron sputtering (HiPIMS) and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 50–67 Read article
-
Biodegradable and Natural Fiber-Reinforced Polymer Composites for Antimicrobial Coatings in Biomedical Applications
Abstract: Since they make medical equipment more biocompatible and practical, biomedical polymers are quite crucial for the advancement of medical technologies. One of the most exciting applications for biomedical polymers is their possible use as protective drug coatings for devices. These coatings aim to limit bacterial binding and biofilm growth, two key causes of illnesses acquired after implantation. Scientists are searching for fresh approaches to combat microorganisms as the issue of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 392–405 Read article
-
Wireless Biosensing Polymer Composites for Smart Healthcare Devices
Abstract: The wireless biosensing polymer composites have been found as one of the possible solutions in developing flexible, real-time and intelligent healthcare monitoring systems. Biomimic polymer matrices coupled with conductive nanomaterials can be used to design an understanding of physiological signals (strain, pressure, and temperature) that are highly sensitive and adaptable sensors. The attachment of these sensors to wireless communication systems, such as the Bluetooth Low Energy and Wi-Fi, eases the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 14, 2026 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1145–1153 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Biopolymer-Based Flocculation for Microplastic Removal: Fenugreek and Okra as Sustainable Alternatives to Synthetic Flocculants
Abstract: Microplastic pollution has emerged as a persistent global environmental concern due to its widespread presence in aquatic ecosystems and potential implications for food chains and human health. Conventional removal approaches, particularly the use of synthetic flocculants such as polyacrylamide (PAM), have demonstrated high removal efficiencies in water treatment applications. However, their use is often associated with environmental concerns including toxicity, non-biodegradable residues, and energy-intensive production processes. In this context, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1119–1128 Read article
-
Fabrication and Assessment of Tribological Performance of Nickel-Graphene-MXene Hybrid Nano-composites
Abstract: As industries such as aerospace, automotive, defence, and electronics demand materials with superior wear resistance, high strength, and thermal stability, traditional metals are reaching their performance limits. Hybrid nanocomposites offer a pathway to meet these stringent requirements. In this study, novel Nickel-Graphene-MXene hybrid nanocomposites were fabricated using a powder metallurgy route, incorporating varying weight percentages (up to 2 wt.%) of MXene and 1 wt.% graphene nanosheets into a nickel matrix …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 780–798 Read article
-
High Performance Multi-Valued Logic (MVL)Gate Design Using FinFET
Abstract: CMOS scaling faces challenges such as leakage, power dissipation, and short channel effects. Multi-Valued Logic (MVL) offers higher information density and reduced interconnections. This work presents a FinFET-based MVL gate design that improves electrostatic control, switching speed, and reliability. Simulation results confirm reduced leakage power and enhanced performance compared to conventional logic. The proposed architecture demonstrates scalability for advanced technology nodes. It also shows potential for low-power applications in portable …
Published in Journal of Microelectronics and Solid State Devices · Vol. 13, Issue 1, 2026 · pp. 34–45 Read article
-
Real-time Water Quality Analysis Using Fuzzy Logic
Abstract: Nowadays the availability of safe drinking water is very difficult. In our project we are analysing water quality using different parameters like pH, turbidity, temperature and TDS for determining its safety level by monitoring the data from the readings. Moreover, we have a monitoring system for the data and also a webpage where all the data from these system is displayed. The sensors are connected to an Arduino Nano microcontroller …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 2, 2026 · pp. 01–11 Read article
-
Traffic Density Estimation Using Image Frames in Python
Abstract: Traffic congestion is a critical challenge in modern urban environments, leading to significant delays, environmental pollution, and increased accident rates. With the rapid growth of vehicle populations in metropolitan areas worldwide, the need for intelligent and automated traffic monitoring systems has become increasingly urgent. Traditional monitoring approaches, such as inductive loop detectors and manual surveillance, are limited in scalability, deployment cost, and adaptability to dynamic traffic scenarios. This paper presents …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 2, 2026 · pp. 38–45 Read article
-
An Overview of Surface Coating Methodologies and Their Use in Technical Materials
Abstract: To safeguard the product or structure against chemical harm, a variety of procedures and materials can be applied in coating applications today. Nowadays, coatings are used extensively in manufacturing all over the world to increase efficiency and reduce expenses two factors that are essential to preserving the sector's profitability. Coated materials have greater strength compared to uncoated materials. A variety of materials, including bio glass, polymers, ceramics, strong and hard …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 19–35 Read article
-
Comparative Analysis of 3D-Printed and Molded Shape-Stabilized Phase Change Composites
Abstract: Thermal energy storage (TES) has become essential for efficiently storing and utilizing thermal energy across applications like industrial heating, power plants, batteries, medical devices, food preservation, and aerospace technology. Because of their high energy density, affordability, and environmental friendliness, phase change materials, or PCMs, are employed extensively. However, challenges like poor thermal conductivity and leakage limit their performance. To address these issues, 3D printing has emerged as a powerful tool …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 184–192 Read article
-
Effects of Halloysite Nano particle Reinforcement of Epoxy Composite Using a Diglycidyl ether of bisphenol-A Prepared by Ultrasonication Casting
Abstract: This study explores a simple and operative approach for developing stronger epoxy-based composite materials by incorporating halloysite nanotubes (HNTs). The composites were made-up through hydraulic compression casting, combining ultrasonic mixing with applied pressure to produce consolidated composite sheets. HNTs were added to the epoxy resin at concentrations ranging from 1 to 5 wt.% at approximately 60°C, and the subsequent composites were examined to understand their internal structure, nanotube dispersion, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
R-M and M-R Model for Interpreting Logic State of Memristor Aided NOR with Enhanced Noise Margin
Abstract: Memristive crossbar arrays are one of the fascinating subjects in the field of nanoelectronics and memory devices. The arrangement of arrays consists of grid-like structure with rows and columns of memristors which are resistive devices that can preserve their resistance state even after power is turned OFF. They have now emerged as a promising alternative to traditional memory technologies due to their high density, non-volatility and low power consumption. This …
Published in Recent Trends in Mathematics · Vol. 1, Issue 1, 2024 · pp. 35–41 Read article
-
Microplastics in Terrestrial Ecosystems: Impacts on Soil Biodiversity, Plant Growth, and Nutrient Cycling
Abstract: Microplastics, defined as plastic particles smaller than 5 mm, have emerged as a widespread environmental contaminant in terrestrial ecosystems. Although their impacts in aquatic environments have received considerable attention, the occurrence and ecological consequences of microplastics in soil ecosystems are increasingly recognized as an important environmental concern. Agricultural practices, plastic mulching, sewage sludge application, wastewater irrigation, compost, atmospheric deposition, and the fragmentation of larger plastic materials are major pathways through …
Published in Research & Reviews : Journal of Ecology · Vol. 15, Issue 2, 2026 · pp. 44–50 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article