Search
929 articles for “Simulation and Modelling”
-
Optimal Location of IPFC based on Installation Cost in a Power System Network using ABC Algorithm
Abstract: This paper presents a methodology for locating the optimal position of Interline Power Flow Controller (IPFC) in a power system network based on installation cost. The proposed methodology uses both conventional and non conventional optimization tools such as LR and ABC, respectively. This methodology is formulated mathematically based on installation cost of the FACTS device and generation cost of the real power. IPFC is modeled using Power Injection (PI) model …
Published in Trends in Electrical Engineering · Vol. 2, Issue 1-2-3, 2012 · pp. 11–30 Read article
-
Autonomous Calibration of Medical Devices Using Synthetic Biosignals and Adaptive Learning
Abstract: The accuracy and reliability of modern biomedical diagnostic devices are critically dependent on effective calibration mechanisms capable of handling dynamic physiological and environmental variations. Conventional calibration approaches, which rely on static reference signals and manual adjustments, are inadequate in addressing challenges such as sensor drift, noise interference, motion artifacts, and long-term performance degradation. To overcome these limitations, this research proposes an innovative AI-driven adaptive biosignal simulation and calibration architecture for …
Published in Journal of Instrumentation Technology & Innovations · Vol. 16, Issue 2, 2026 Read article
-
Investigation of Electro-optical Characteristic and Structure Optimization of PMMA: Bepq2/BCP/Tpbi Blue Highly Efficient OLED Device
Abstract: In this Investigation, the energy level structure of the Spiro-MeOTAD/PMMA: Bepq2/BCP/Tpbi/LiF OLED has been investigated to explain the method of electron-hole charge carrier pair recombination and the light generation. The Maxwell-Boltzmann statistics model was applied to optimize the structure to reduce the band gap between conductive layers. We found the simulated results J–V, J-Illumination flux, and Current Efficiency (CE) characteristics when we applied forward bias. Inconclusive results determined the threshold …
Published in Journal of Polymer & Composites · Vol. 11, Issue 5, 2023 · pp. 56–68 Read article
-
Computational Modeling of Polymer Semiconductors for Electronic Applications
Abstract: Polymer semiconductors have become important materials in modern electronic applications because they combine semiconducting behavior with mechanical flexibility, low-cost processing, and tunable molecular structure. Their growing use in organic field-effect transistors, organic photovoltaics, organic light-emitting diodes, and flexible sensing devices has increased the need for accurate computational approaches that can predict material properties and device performance before experimental fabrication. This paper reviews the major computational modeling techniques used for polymer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 132–146 Read article
-
Role of Hybrid Controller Based FACTS Devices in Relieving Power Crisis
Abstract: The power crisis is a global concern for research and development engineers. These issues may be summarized manifold. These issues may be sudden outage/ failure of power system network, considerable power loss on the line, the voltage flickers, lack of proper equipment’s to monitor and protection, presence of significant harmonic level in the line that affects the performance of the equipment connected to line. Some of these issues may persist …
Published in Recent Trends in Electronics Communication Systems · Vol. 9, Issue 1, 2022 · pp. 1–10 Read article
-
Electrified Skateboard Simulation Using QSS Toolbox
Abstract: AbstractThe proposed aim of Electrified Skateboard is to scale down the conversion of existing vehicles running on the Internal Combustion Engine (ICE) to Battery Electric Vehicles (BEV) using Retrofitting Techniques. This approach is specifically aimed at the conversion of vehicles on a small scale. It is an interdisciplinary research model that is designed to keep in view of upcoming E-Mobility and Renewable Energy markets. Governments and Companies around the world …
Published in Journal of Microelectronics and Solid State Devices · Vol. 7, Issue 1, 2020 · pp. 18–25 Read article
-
Modern perspectives on composite armor
Abstract: This article is study of garment oriented schemes to learn composite armor. Bulletproof armor has been developed to protect humans from destructive weapon. Assess has been to develop low-cost, easy in fabricate originated easy wearable biocompatible bulletproof garment. Suggestive estimation has scriptive issued competence between variations in plate thickness and amount of energy absorbed by lamination of armor. Henceforth, observation has been 12mm thickness of composite plate lying to be …
Published in Trends in Machine design · Vol. 8, Issue 3, 2021 · pp. 14–20 Read article
-
Analysis of new Floating Offshore Wind Turbine under drag force operation
Abstract: The goal of this paper is the study and analysis of a new type of floating offshore wind turbine (FOWT), which operates under drag force instead of lifting force as the conventional FOWT. We simulate the wind turbine operation modifying the pitch angle to faithfully reproduce the behavior when submitted to waves’ movement. The analysis of the wind turbine performance is developed in a model at laboratory scale to control …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 1, 2024 · pp. 1–10 Read article
-
Characterizing L-Band EDFA for WDM Optical Communication using Implicit Analytical Model
Abstract: ABSTRACT In this paper, some of the significant design parameters of L-band EDFA such as choice of optimum pump wavelength, optimum erbium-doped fiber (EDF) length, and optimum pump power have been characterized by solving implicit analytical signal gain equation using simulation as derived for C-band EDFA by F. F. Rühl. After determining optimum pump wavelength, optimum pump power and optimum EDF length, performance of L-band signal amplification has been shown …
Published in Trends in Opto-electro & Optical Communication · Vol. 2, Issue 3, 2012 · pp. 8–16 Read article
-
Enhance Thermal and Conductive Properties through Graph Neural Network-Based Machine Learning-Driven Advanced Polymer Material Design
Abstract: Advanced polymer materials are widely used in modern engineering and manufacturing because of their lightweight nature, flexibility, durability, and adaptability to different applications. However, designing polymer materials with enhanced thermal and electrical properties remains a challenging task. The performance of polymers is influenced by a complex combination of molecular structures, filler materials, processing parameters, and nanoscale interactions. Conventional optimization methods often require extensive experimental trials and computational resources, making it …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 386–407 Read article
-
Rotational Speed Influence on Weld Temperature in Friction Stir Lap Joint of Aluminium Alloy 6061 Using Numerical Simulation
Abstract: The weld quality assessment in friction stir welding depends on the choice of suitable weld parameters. Rotational speed is one such parameter. The study utilizes a computational fluid dynamics model to examine the influence of various rotational on the workpiece and weld interface temperature. The workpiece selected for this study is an Aluminium Alloy 6061, while the tool employed is a truncated conical pin tool featuring a conical shoulder in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 235–245 Read article
-
Efficiency Matters: A Study of Energy Analysis Techniques in Thermal Power Plants
Abstract: The objective of this article is to perform exergy analysis for warm control plants based on the simulation software Aspen Furthermore. In this ponder, the most areas of the system counting the kettle and the steam turbine are modeled using the Aspen Also program. Exergy investigation of the modeled system is examined to get the vitality misfortune conveyance of the system. The impacts of different working conditions on the exergy …
Published in Journal of Thermal Engineering and Applications · Vol. 10, Issue 1, 2023 · pp. 14–19 Read article
-
Optimization of Process Parameters for AISI 304 Using Micro-EDM Drilling Process Through Response Surface Method
Abstract: The increasing demand for micro-parts in high-tech products, such as micro-electromechanical systems (MEMS) applications and micro-electronic devices, has driven significant advancements in micromachining technologies. Among the various micromachining processes, the fabrication of accurate microholes and pins is critical for the performance and reliability of miniature components. Micro-hole drilling plays a vital role by enabling the production of deep holes with excellent straightness, roundness, and surface quality. It is widely used …
Published in International Journal of Manufacturing and Production Engineering · Vol. 3, Issue 1, 2025 · pp. 37–47 Read article
-
Design Conceptualization and Computational Analysis of Cryogenic Engine Nozzle-ABYOM
Abstract: The main purpose of this paper is to design a cryogenic engine nozzle with specified dimensions using CATIA V5 software and analyze the nozzle using ANSYS software. The realizable k-ε viscous model was used for calculation and the Hydrogen (H2) had retained as an ideal gas. The CFD simulations were done on the nozzle to find the pressure, density, velocity, and temperature. In the graph, there are 500 points streamlined …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Investigate an Implementation Study of TI-6AL-4V Lattice-based Scaffold Design Using Finite Element Analysis
Abstract: Implementation studies are advised to determine the effectiveness and performance of bone scaffolding in morphology, which has been demonstrated scientifically. The rehabilitation of bone defects, which is still a complex problem in orthopedic surgery, was the subject of an implementation study we provided. Biomaterial scaffolding porosity and pore size are essential in both in vivo and in vitro bone development. However, it has been linked to various drawbacks, including poor …
Published in International Journal of Biochemistry and Biomolecule Research · Vol. 1, Issue 1, 2023 · pp. 28–35 Read article
-
Influence of Mechanical Parameters on Corrosion Behavior of Metal Coupons in Simulated Environmental Conditions
Abstract: This study investigates the influence of mechanical parameters—namely applied stress, surface roughness, and deformation history—on the corrosion behavior of metal coupons exposed to corrosive environments. Mild steel and aluminum alloy specimens were prepared with controlled variations in tensile stress, polishing grades, and cold-working levels to simulate real-world mechanical influences. These coupons were immersed in a 3.5% NaCl solution under ambient conditions, and their corrosion rates were monitored over a 30-day …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 6–12 Read article
-
Design conceptualization and computational analysis of cryogenic engine nozzle -ABYOM
Abstract: The main purpose of this paper is to design a cryogenic engine nozzle with specified dimensions using CATIA V5 software and analyze the nozzle using ANSYS software. The realizable k-ε viscous model was used for calculation and the Hydrogen (H2) had retained as an ideal gas. The CFD simulations were done on the nozzle to find the pressure, density, velocity, and temperature. In the graph, there are 500 points streamlined …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 2, 2022 · pp. 14–23 Read article
-
Computational Modeling of Fluid Flow through A Fractured Media under Overburden Pressures
Abstract: Computational analyses were conducted to investigate fluid flow characteristics of a real fractured media. Finite element (FE) and computational fluid dynamics (CFD) analyses were implemented to carry out these computational analyses. The fractured media was exposed to external pressurization to predict permeability and asperity deformation. Furthermore, a series of CFD-FE analyses were also conducted to determine the reduction in permeability of the fractured media under the external pressure. An elastic-plastic …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 25–43 Read article
-
Computer Data Processing and Empirical Economics
Abstract: This is an article on empirical economics and computer data processing that discusses how computational technology have changed empirical research methods. It analyses how computer systems have changed data management, statistical modelling, and econometric analysis, focussing on large-scale data processing, algorithmic efficiency, and repeatability. Forecasting, policy simulation, and panel data analysis are key uses. The paper also addresses data quality, computational, and ethical issues in economic data use. The paper …
Published in Research & Reviews : Journal of Statistics · Vol. 15, Issue 1, 2026 · pp. 09–20 Read article
-
AI-Designed Functionally Graded Polymer Composites for Multifunctional Thin Films
Abstract: The design of multifunctional polymer composite thin films requires simultaneous optimization of mechanical, optical, barrier, and thermal properties—objectives often in conflict when using conventional homogeneous materials. This study presents an artificial intelligence-driven framework for designing functionally graded material (FGM) architectures in polymer nanocomposite thin films. We integrated machine learning with physics-based modeling to optimize compositional gradients across film thickness, achieving superior performance compared to homogeneous and discrete multilayer alternatives. A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1026–1041 Read article