Search
139 articles for “uniform parts”
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Strength Enhancement of Concrete with Nano-Based Admixtures
Abstract: The integration of advanced nanomaterials such as nano-silica and nano-clay has emerged as a highly promising and innovative technique to significantly enhance the mechanical characteristics and long-term durability of conventional concrete. In this comprehensive study, the effects of nano-modification on various concrete properties, including workability, compressive strength, split tensile strength, and flexural behavior, were thoroughly evaluated through a systematic experimental program. A series of concrete mix designs incorporating varying proportions …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Synthesis and Characterization of Ta Doped Nanostructured PZT
Abstract: Lead Zirconate Titanate (PZT) powder of composition Pb(Zr0.65Ti0.35)O3 was modified by incorporation of Tantalum (Ta5+) in a wide composition range (5–25 at%) by chemical co-precipitation method using PbO, Zr2O3, TiO2 and Ta2O5. X-ray diffraction patterns of the samples showed the formation of a single phase and confirmed the formation of a rhombohedral phase of all the samples after sintering. SEM analysis showed well-developed, uniformly packed grains. Both the linear particle …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 41–48 Read article
-
Enhancement of Electrical Conductivity of Laterite Derived Ferric Oxide to Facilitate As Anode Materials
Abstract: Laterite is a mineral abundant in ferric oxide and various impurities, including aluminum oxide and silicon dioxide. The extraction of ferric oxide from laterite is accomplished through a cost-effective leaching process employing HCl, NaOH, and Sodium dodecyl sulfate (SDS). Characterization using Xray diffraction (XRD) confirmed the synthesized particles to be α-Hematite nano particles, with an average particle size of 94.21 nm, predominantly falling within the range of 90 nm to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 1–11 Read article
-
FLEXURAL VIBRATION OF NON-UNIFORM BEAM ON BI-PARAMETRIC FOUNDATION UNDER HARMONIC MOVING LOAD WITH NON-CLASSICAL BOUNDARY CONDITIONS
Abstract: The dynamic response to harmonically varying moving loads of non-uniform elastic beam resting on bi-parametric foundation with non-classical boundary condition, time dependent in particular is examined in this paper. Here, the beam is considered non-uniform, with the moment of inertia and the distributed mass varying continuously along the span L as functions of the position 𝑥. In order to guarantee a more stable structure and a reduce risk of resonance, …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 28–42 Read article
-
Multiphysics Optimization of Polymer–Metal Hybrid Electrode Geometry in Electrostatic Precipitators for Enhanced Particle Collection Efficiency
Abstract: Electrostatic precipitators (ESPs) remain one of the most effective technologies for controlling fine particulate emissions in industrial exhaust systems. However, their performance is strongly influenced by electrode geometry and material characteristics, which govern electric field distribution, corona stability, and particle migration behaviour. In this study, a comprehensive numerical investigation is carried out to optimize electrode geometry using a multiphysics modelling framework, while introducing a novel polymer–metal hybrid design to enhance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 701–716 Read article
-
A Literature Review on Extrusion/Spheronisation-A Pelletization Technology
Abstract: Extrusion-spheronization is a leading pelletization technology, widely favored for its economic and commercial viability. It is a cost-effective method suitable for large-scale production, making it the most efficient approach for oral drug delivery. This process provides multiple benefits, such as improved flow characteristics, lower friability, a narrow particle size range, easier coating, consistent packing, reduced likelihood of dose dumping, and more predictable gastric emptying. Pellets usually measure between 0.5 and …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 1, 2025 · pp. 61–71 Read article
-
Monitoring of Disable Patients with their Medical conditions using K-NN Classifier Algorithm
Abstract: In this paper a general procedure for the infirmity assessment of patients with ineptitudes is presented. It relies upon consistently activity examination using ordinary accelerometer sensors conveyed by the noticed person while at home without clinical staff present. The k-NN classifier is being used to study six different types of activities after preliminary data pre-planning, followed by further decreases in estimation and confirmation time. Promising results are gotten which could …
Published in Current Trends in Signal Processing · Vol. 12, Issue 2, 2022 · pp. 1–7 Read article
-
Electromagnetic Transients in Compensated Overhead Lines with Multiple Tower Spans
Abstract: This paper addresses the analysis of the electromagnetic transients developed in an important class of non-uniform high-voltage power lines. It deals particularly with compensated long overhead high- voltage transmission lines composed of several tower spans, which are connected in cascade. The derived mathematical model leads to a system composed of simultaneous partial differential and algebraic equations, which can be solved numerically in terms of parametric functions using the software Mathematica’s …
Published in Trends in Electrical Engineering · Vol. 15, Issue 2, 2025 · pp. 1–9 Read article
-
Role of Cement and Fly Ash in Soil Stabilization
Abstract: Soil stabilization changes the engineering properties of soil and produces strength and stability. Use of industrial wastes and manufactured materials in soil stabilization can be cost effective and environmental friendly. As there is a growth of habitations surrounding the PSIT campus, therefore, soil samples collected from this area were analyzed for its plasticity index properties. It was found that soils of this area come under low plastic category. Hence, the …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 3, 2020 · pp. 1–8 Read article
-
Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements
Abstract: Aluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight ratio and also due to resistance to wear and corrosion. The current investigation involves the examination of the microstructural and tensile behaviour of stir-casted Al5052-based composites. The nanoparticles of 1% titanium diboride and 1% zirconia were added as reinforcement materials. To better understand the microstructure of the composite specimens, scanning electron …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–7 Read article
-
Dissipative Particle Dynamics Simulation Study on the Evolution of Photoinitiated Free Radical Polymerization Crosslinked Networks
Abstract: Gradient polymer materials overcome the limitations of conventional homogeneous polymers by integrating multiple distinct functionalities within a single continuous structure. Although photoinitiated free-radical polymerization offers excellent spatial and temporal control, the underlying microscopic mechanisms governing network evolution under non-uniform light fields remain poorly understood. In this study, a mesoscale dissipative particle dynamics (DPD) model was successfully developed to couple free-radical polymerization kinetics—including initiation, propagation, crosslinking, and termination—with exponential light attenuation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 142–158 Read article
-
Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance
Abstract: The ever-growing demands of modern mechanical applications necessitate the development of materials with superior mechanical properties. In this research, we delve into the creation and evaluation of Aluminum Metal Matrix Composites (Al MMCs) made via the powder metallurgy route, reinforced with both micro and Nano-scale particles. The key aim is to investigate the possible cooperative effects of this dual reinforcement approach on the mechanical behavior of the composite. Traditional aluminum …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 220–229 Read article
-
Experimental Investigations of Prestressed Hollow Core Slabs and Grouted Hollow Core Slabs
Abstract: With the advent and rapid inclusion of prefabricated concrete system to the construction industry, it poses interesting research challenges to the academic world. The acceptance of hollow-core slab as an alternative to the normal reinforced concrete solid slabs is getting delayed due to the delusion among public. The usage of grouted hollow core slabs by filling the core with grout is one of the increasing demands observed by the hollow …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 16–21 Read article
-
Mechanical and Morphological Characterization of Halloysite Nanotube (HNT) Reinforced Urethane Dimethacrylate (UDMA) Dental Composites
Abstract: Dental resin composites are widely used in restorative dentistry because of their excellent aesthetics, conservative cavity preparation, and satisfactory mechanical properties. However, their long-term clinical performance is limited by polymerization shrinkage, wear, microcrack formation, water absorption, and degradation in the oral environment. This study investigates the mechanical and morphological characteristics of Halloysite Nanotube (HNT)-reinforced Urethane Dimethacrylate (UDMA) dental composites to enhance the structural performance and durability of restorative materials. UDMA-based …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Unification and DC Conductivity of PDMS/NiNPs Nanocomposite
Abstract: The DC conductivity of nickel nanoparticles–polydimethylsiloxane (NiNPs–PDMS) composite materials has attracted considerable attention due to their promising applications in flexible electronics, sensors, and energy storage devices. The electrical performance of these composites is largely governed by the formation of conductive networks within the insulating polymer matrix. Incorporating nickel nanoparticles into PDMS introduces conductive pathways that significantly enhance DC conductivity once a critical percolation threshold is reached.Several key factors influence the …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 1, 2026 · pp. 28–37 Read article
-
Effectiveness of Soya Bean Intake on Reducing Menopausal Symptoms Among the Menopause Women
Abstract: Background: Menopause represents a natural phase in a woman’s life, signifying the end of her reproductive years and typically occurring as part of the aging process. While some women navigate this transition smoothly, others may experience challenging or severe symptoms. Study Objective: The purpose of this research was to assess the impact of soybean consumption in reducing menopausal symptoms. A total of 60 menopausal women from the gynecology outpatient department …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 14, Issue 3, 2024 · pp. 93–105 Read article
-
Study of Evaluating the Feasibility of Banana Stem Fibers and Sugarcane Husk as a Sustainable Additive in Pervious Concrete for Urban Pavements
Abstract: This study explores the integration of eco-friendly materials: banana stem fibers and sugarcane husk, into pervious concrete to enhance its mechanical properties while maintaining high permeability. The research addresses environmental concerns related to agricultural waste disposal and the resource-intensive nature of traditional construction materials. Banana stem fibers, known for their tensile strength and durability, and sugarcane husk, rich in lignin and cellulose, were selected as reinforcements. The fibers were extracted, …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 33–39 Read article
-
Experimental Analysis of Automotive Exhaust Heat Exchanger for Thermal Uniformity
Abstract: AbstractThe I.C. Engines are losing large amount of heat into environment directly. This waste heat can be reused for other purpose like TEG, Air conditioning etc. A heat exchanger is a device that is used to transfer thermal energy between two or more fluids, between a solid surface and a fluid, or between solid particulates and a fluid, at different temperatures and in thermal contact. In case of TEG there …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 1–5 Read article