Search
145 articles for “scanning electron microscopy”
-
Experimental investigation of thermally grown Indium film’s structural and tribological properties
Abstract: Indium thin film growth found numerous applications, such as cold welding of infrared detectors and readout-integrated circuits (ROIC) to form sensor chips. In film is grown on the Si substrate by thermal evaporation. The XRD results indicated the tetragonal bcc phase in the (101) preferential plane. Scanning electron microscopy (SEM) indicated an uniform, continuous film covering the whole surface. The EDS examination confirmed the pure In film. The atomic force …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 58–66 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
Enhancements in Titanium Matrix Composites: A Multifaceted Exploration of Various Structural Ceramics Reinforcement
Abstract: This research study delves into the comprehensive exploration of Titanium Matrix Composites (TMCs) reinforced with Silicon Carbide (SiC), Alumina (Al2O3), and Boron Nitride (BN). The investigation is structured into three key phases, each addressing essential aspects of TMCs: Phase 1 involves materials and manufacturing, where TMC coupons were fabricated through the stir casting technique with varying compositions of aluminum and silicon carbide. Phase 2 focuses on characterization and defect detection, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 83–94 Read article
-
Properties and antimicrobial activity of bacterial nanocellulose composite incorporated with silver nanoparticles based on green synthesis
Abstract: Green silver nanoparticles (AgNPs) synthesized using medical plant extracts as capping and reducing agents demonstrate broad applicability in addressing the threat posed by infections. In this study, we present a sustainable, low-toxicity, and cost-effective bacterial nanocellulose composite with silver nanoparticles based on green synthesis that uses Origanum vulgare as a reducing agent due to numerous biological components. The formation of AgNPs in composite and morphological properties was analyzed using scanning …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 323–328 Read article
-
Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements
Abstract: Aluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight ratio and also due to resistance to wear and corrosion. The current investigation involves the examination of the microstructural and tensile behaviour of stir-casted Al5052-based composites. The nanoparticles of 1% titanium diboride and 1% zirconia were added as reinforcement materials. To better understand the microstructure of the composite specimens, scanning electron …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–7 Read article
-
Microstructural and Mechanical responses of Al6061 alloy matrix composite reinforced with yttria particles
Abstract: The increasing need for materials that can improve the overall performance of automotive and aerospace components has driven the development of composite materials. Aluminium Metal Matrix Composites (AMMC) have become a popular alternative due to their ability to satisfy the changing needs of industries. This study investigates the mechanical characteristics of AMMC (Aluminium Matrix Metal Composite) made using the stir casting method. The study examines the effects of different amounts …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 246–252 Read article
-
Comparative study of the Antibacterial Properties of Modified Textile Materials with Different Metal Nanoparticles
Abstract: A number of metal particles have proven antibacterial properties. In this study, a comparative analysis was made of two types of metal particles: zinc oxide and titanium oxide nanoparticles respectively, which were deposited on cellulose material and were fixed by means of a cross-linked gelatin hydrogel. Three methods were applied under different reaction conditions for obtaining the biocomposite materials. The biomaterials were investigated by means of scanning electron microscopy, transmittance …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 92–101 Read article
-
Influence of Gd Doping in Structural, Morphological and Optical Properties of Zno Nanostructures Synthesised Via Sol-Gel Processes
Abstract: In this study, nanocrystalline Zn1-xGdx (x=0.0 and 0.03) samples were synthesised via the Sol-gel combustion process. An array of analytical techniques was employed to examine the prepared samples to determine their different physical features. For both pristine and Gd-doped samples, the crystal symmetry is hexagonal with the P63mc space group which is verified via the Rietveld refinement analysis of X-ray diffraction (XRD) data. The atoms' bond length Zn-O and bond …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 219–225 Read article
-
Effect of Bismuth doping on Thiourea crystals : A NLO Material
Abstract: Single crystals of pure and thiourea-substituted bismuth were successfully grown using the slow evaporation solution growth technique at ambient temperature. The impact of thiourea doping on the crystal properties was thoroughly investigated. Solubility tests for the grown samples were conducted at various temperatures, providing crucial data on the dissolution characteristics. Structural characterization of these crystals was performed using single crystal X-ray diffraction (XRD), confirming their crystalline nature. Energy-dispersive X-ray spectroscopy …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 10–16 Read article
-
Enhanced Synthesis Methods and Comprehensive Material Response Analysis in Alloy-Infused Nanocomposites
Abstract: This study looks into the most advanced ways to make alloy-infused nanocomposites and how they react to different materials. It focuses on how these nanocomposites can be used to process and make plastics and composites. A lot of people are interested in alloy-infused nanocomposites because they have better mechanical, thermal, and electrical qualities than regular composites. The goal of this study is to improve the methods used for making nanocomposites …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 175–191 Read article
-
Synthesis And Application of Nano Zinc Oxide in Fabrication of Rubber Composites
Abstract: Nano zinc oxide (ZnO) has garnered significant attention in recent years due to its unique properties and potential applications in various fields. This paper discusses the synthesis of nano ZnO by precipitation method and characterizes them with various techniques such as X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Fourier Transform Infra-Red (FTIR) Spectroscopy and explores its application in the preparation of rubber composites. These synthesized particles were measured to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 1–10 Read article
-
Nanoyeast Supported on Silica Gel for The Continuous Flow Bioethanol Production
Abstract: Nanomaterials outperform their bulk counterparts. Yet, production of nanomaterials, especially, nanoyeast is a challenge and is an upcoming field. Yeast is a fungal strain that consumes carbohydrates (glucose, sucrose, molasses and the like) and produces bioethanol, a potential transportation fuel. Impregnation methods are well known in catalysis to yield nanomaterials via better dispersion. An attempt has been made to modulate the size of yeast to increase the efficiency of carbohydrate …
Published in International Journal of Advance in Molecular Engineering · Vol. 2, Issue 1, 2024 · pp. 1–7 Read article
-
Zn Doped CuO Nanoparticles for Increasing the Longevity of The Agricultural Products †
Abstract: Nanotechnology is an enabling technology at the service of mankind. Indeed, enhancing the long-term storage of agricultural products (post-harvest during transportation and storage) in general and apples and tomatoes, in particular, is a challenge. Zn-doped CuO is a proven nanomaterial with special ability to kill plant pathogens as well as a variety of microorganisms (bacteria, virus, and fungus). Much of the review is focused on the landmark papers published by …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 1, 2024 · pp. 14–29 Read article
-
Biosynthesis of Zinc Oxide Nanoparticles and Their Revolutionary Impacts on Agroindustry: Review
Abstract: Nanotechnology is a new approach of science which provides alternative tool in many fields including agriculture. This comprehensive review focuses on the biosynthesis and characterization of zinc oxide nanoparticles (ZnO NPs), highlighting their vast potential in agroindustry applications. Unlike traditional physical and chemical methods, which are often costly, time-consuming, and involve hazardous materials, this review explores the promising biological synthesis routes, offering a more sustainable and eco-friendly alternative for producing …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 2, 2024 · pp. 33–50 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Evaluation of Polysaccharide-Based Membranes for Transdermal Drug Delivery in Chronic Pain Management
Abstract: In order to improve treatment effectiveness and patient compliance, chronic pain management is still a major challenge in modern healthcare, requiring creative medication delivery methods. The potential of polysaccharide-based membranes for transdermal drug delivery is assessed in this work, with particular attention to chitosan, alginate, and hydroxypropyl methylcellulose (HPMC). Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were two characterization techniques used to assess the membranes' physical and chemical …
Published in International Journal of Membranes · Vol. 1, Issue 2, 2024 · pp. 28–38 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Thermodynamic Analysis and Slow Pyrolysis Product Characterization are Used to Assess Rice Straw for Bio-char Production
Abstract: This work explores the viability of using slow pyrolysis to produce bio-char using rice straw as a feedstock. The objective is to characterize the resulting bio char and analyse the thermodynamic processes involved in its formation. Rice straw, an abundant agricultural residue, was subjected to slow pyrolysis under controlled conditions. The produced bio char was characterized using various analytical techniques, including scanning electron microscopy, elemental analysis, and surface area measurements. …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 13, Issue 2, 2024 · pp. 26–29 Read article
-
Development of Biomass-Derived Composites From Commodity Plastics Via Pyrolysis For Enhanced Corrosion Protection of Metals
Abstract: Escalating environmental concerns and the depletion of fossil resources have spurred the need for sustainable and eco-friendly materials. By converting plastic waste into valuable carbonaceous materials via pyrolysis, both plastic pollution and resource scarcity can be addressed. The process involves the thermal decomposition of plastics in an inert atmosphere, producing a mixture of gases, liquids, and solid residues rich in carbon. These carbonaceous residues are then incorporated with biomass materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 59–70 Read article