Search
114 articles for “graphene”
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Effects of Nano Additives on Performance and Emission Characteristics of CI Engine with Mahua Biodiesel and Diesel Blends as Fuel
Abstract: Due to growing environmental concerns and the imminent depletion of fossil fuels, the development of eco-friendly alternative fuels, such as biodiesel, is imperative. To improve the performance and emission properties of diesel engines utilizing biodiesel blends, the effective introduction of metallic and non-metallic nano-additives has been established. This research aimed to investigate the blending ratios of biodiesel (B0, B10, B20, and B40) in a compression ignition engine. Furthermore, the impact …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 41–49 Read article
-
Improved Cooling Effectiveness in Radiators and Heat Exchangers with Nanofluid-Based Technology
Abstract: This study discusses how the process of heat transfer in radiators and heat exchangers can be improved using nanofluids and analysis of computational fluid dynamics. These nanofluids comprise Al₂O₃ and ZnO dispersed in water-based ethylene glycol solutions, and graphene oxide dispersed in water-based solutions, and performance evaluation was done for the range of flow rates 180–420 l/h. And a 3D CAD model was created using the ANSYS Workbench. It was …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 31–62 Read article
-
Advanced Polymer Composite Coating for Thermal Performance and EEE Improvement of a Solar Energy Harvesting System
Abstract: The integration of carbon-based nanomaterials with polymer matrices presents a promising route toward advancing solar energy harvesting technologies. In this study, nanoparticle-blended polymer composite coatings are examined to evaluate the performance of FPSC, utilizing an unconventional collector setup and a multiple-carbon-based nanoparticle-blended paint polymer. Nanomaterial provides a crucial alternative for enhancing their thermal efficiency. The research findings reveal that the deformation of nanomaterials improves the heat efficiency of solar collectors. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1197–1222 Read article
-
Development and Performance Evaluation of GO–ZnO/PU Hybrid Nanocomposite Coatings for Improved Optical Transmission, Cooling, and Self-Cleaning in PV Systems
Abstract: The performance of solar photovoltaic (PV) modules with time is affected by thermal heating, dust buildup, and exposure to ultraviolet (UV) light; as a result, the power loss increases rapidly during the use condition. In this study, a polyurethane (PU) nanocomposite, fabricated with graphene oxide and zinc oxide (GO–ZnO), is invented and examined. Improvements in heat management, light transmission, and dirt resistance are planned for PV glass surfaces. The nanocomposite …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 243–249 Read article
-
Applications of Nanomaterials in Membrane Separation for Effluent Treatment in the Textile Industry
Abstract: The textile industry makes a significant contribution to economic growth. As the global population continues to increase exponentially, production rates are also on the rise to meet this growing demand. Unfortunately, this surge in production often leads to noncompliance with environmental regulations. While the textile industry supports economic development, it also contributes to serious pollution. Various dyes, such as azo dyes, Congo Red (CR), Crystal Violet, methylene blue, and methyl …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 1–8 Read article
-
Investigation of the Hall and Nernst-Ettingshausen Effects in Diluted Magnetic Semiconductors
Abstract: This review explores the Hall and Nernst-Ettingshausen effects in various magnetic systems, including diluted magnetic semiconductors (DMS), topological insulators, superconductors, and novel composite materials. In DMS, the interplay of ferromagnetism and magnetic impurities introduces unique transport behaviors, particularly influencing the anomalous Hall effect (AHE) and thermomagnetic phenomena. We also examine the Nernst-Ettingshausen effect (NE) in topological insulators and superconductors, revealing the influence of band topology and vortex-like excitations. Special attention …
Published in Research & Reviews : Journal of Physics · Vol. 13, Issue 3, 2024 · pp. 1–5 Read article
-
Review And Analysis of Application of Conductive Polymer Composites in Power-Efficient RF Circuits For 5G PAPR Reduction
Abstract: The need for low power RF circuits has gained more importance in the background of fifth-generation (5G) wireless communication systems, since the inherent PAPR characteristic of 5G signals—especially when using orthogonal frequency division multiplexing (OFDM) based techniques—becomes high. This high PAPR limits the efficiency of RF power amplifiers, increases power consumption, and induces thermal management challenges. In this context, conductive polymer composites (CPCs), based on advanced polymer matrices integrated with …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 111–125 Read article
-
Thermally Regulated Polymer-PCM Composites for Efficient Solar Energy Harvesting and Storage
Abstract: This study investigates the development of high-performance; shape-stabilized polymer composites infused with phase change materials (PCMs) for thermal energy storage in solar energy applications. Polyethylene glycol (PEG-6000) was employed as the core PCM due to its high latent heat and suitable melting point, while high-density polyethylene (HDPE) served as the supporting polymer matrix to provide structural stability. One of the primary limitations of PEG-based PCMs is their inherently low thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 153–163 Read article
-
Design and Characterization of High-Performance Polymer Nanocomposites for Aerospace Applications
Abstract: Polymer nanocomposites have revolutionized aerospace materials through mechanical strength, thermal stability, and lightness. A number of polymer matrices filled with nanofillers such as carbon nanotubes, graphene, and nanoclay considerably improved structural integrity, flame resistance, and environmental adaptability. However, fabrication techniques are still being optimized so that nanofillers are properly dispersed throughout, which may create contradictions between mechanical strength and process ability. This work tries to design and characterize high- performance …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 178–193 Read article
-
Molecular Transport Kinetics of Non-Polar Solvents Through AGNP Filled EPDM Elastomeric Composites
Abstract: EPDM Based rubber composites can be used in tank and pipe lining works. In these applications one of the major requirements is that the composite must have good fluid permeability and chemical degradation resistances in their working environment. In order to enhance the performance of EPDM rubber to suit these applications, scientists and engineers are trying to develop novel nanocomposites by incorporating nano fillers. In the present work, to ensure …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 993–1006 Read article
-
Advanced Polymer Nanocomposite EEG Electrodes for Enhanced Epileptic Seizure Detection: A Comparative Analysis
Abstract: Electroencephalography (EEG) has been very important in the detection of epileptic seizures so as to enable successful diagnosis, surveillance and therapy of epilepsy. Nevertheless, EEG electrodes based on traditional metals may be limited due to high or high contact impedance, lack of biocompatibility, discomfort to patients and prone to motion artifacts, which interfere with signal quality and diagnostic adequacy. The recent progress in material science has resulted in coming up …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Recent Innovations in Semiconductor Materials for Smart Electronic Devices
Abstract: Recent advancements in semiconductor materials have significantly transformed the design, performance, and functionality of smart electronic devices such as smartphones, wearable systems, IoT devices, autonomous systems, and biomedical electronics. With the continuous demand for higher processing speed, lower power consumption, improved thermal stability, and extreme miniaturization, traditional silicon-based semiconductor technology is facing major limitations. As device dimensions shrink to the nanometer scale, challenges such as leakage current, heat dissipation, and …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 2, 2026 Read article
-
Sustainable Carbon Materials for Catalysis, Energy Conversion, and Environmental Remediation
Abstract: Among the most ancient and adaptable materials used by humans, carbon finds use in a wide range of industries, including electronics, energy production, medicine, water purification, air filtration, and catalysis. Among them, activated carbon's highly developed microporous structure, remarkably large specific surface area, and adjustable surface functions have drawn a great deal of attention from both science and industry. Activated carbon materials have been widely used as molecular sieves, adsorbents …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 47–52 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal-polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Performance Evaluation of Hybrid Polymer Composite Materials for Electromagnetic Interference Shielding in Flexible and Wearable Electronic Devices
Abstract: Wearable electronic devices require novel hybrid polymer composites that offer flexible, lightweight and highly effective EMI shielding characteristics. The development and characterization of flexible polymer composites combining hard magnetic nanoparticles and electrically conductive fillers are explored. The suitability of thermoplastic polyurethane (TPU), polydimethylsiloxane (PDMS) and epoxy resins for use as EMI shielding composite matrices was evaluated in terms of their flexibility, stability and biocompatibility. Hybrid filler systems were developed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 630–648 Read article
-
Smart Polymer Composites with Multifunctional Capabilities Integrating Electroactive Polymers Conductive Nanofillers and Flexible Electronics for Advanced Sensing and Actuation Systems
Abstract: Smart polymer composites have gained significant attention to their ability to integrate polymer matrices with conductive nanofillers, offering tunable electrical, mechanical, and electroactive properties. These composites are highly responsive to external stimuli such as electrical fields, mechanical stress, and temperature variations, making them ideal for applications in flexible electronics, soft robotics, and adaptive sensing systems. This research investigates the effect of nanofiller dispersion on the performance of polymer composites, optimizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 946–965 Read article
-
Nanostructured Catalysts for Sustainable CO2 Reduction: Advancing Green Chemistry and Polymer Composites
Abstract: This study provides a comprehensive analysis of advanced nanostructured catalysts designed to enhance the efficiency of artificial photosynthesis for sustainable fuel production. We systematically evaluated a range of nanomaterials—including metal oxides, plasmonic nanoparticles, and carbon-based composites—to determine their effectiveness in converting solar energy into storable chemical fuels. The catalysts were synthesized via sol-gel, hydrothermal, and green methods, and their properties were thoroughly characterized using XRD, SEM, TEM, UV-Vis spectroscopy, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 175–181 Read article
-
Innovative 3D Printed Cell Scaffolds with Magnetized Nanocomposites for Targeted Cancer Therapy Drug Delivery
Abstract: In recent years, scaffolds have gained increasing attention in the field of tissue engineering, especially in cancer treatment. Nanocomposite scaffolds have emerged as promising candidates for delivering drugs to cancer cells. 3D printing technology has enabled the fabrication of customized scaffolds with precise pore size and complex geometries. This study explores the development of 3D printed scaffolds of nanostructured made of graphene oxide and Poly-Caprolactone (PCL) nanocomposites, which can be …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 48–55 Read article