Search
154 articles for “Stress Concentration”
-
Investigating the Surface Defects and Structural Integrity of 3D Printed Hydrogen Storage Cylinders in UAV Applications
Abstract: This research explores the processing and manufacturing challenges of 3D printed polymer composites for high-pressure hydrogen storage in UAVs. The study focuses on addressing surface integrity and structural robustness issues inherent in additive manufacturing. Finite Element Analysis (FEA) was conducted on four thermoplastic polymer ABS, PET-G, HDPE, and Nylon to assess their mechanical performance under 35 MPa of pressure. Results revealed that PET-G and ABS provided better stress distribution and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 161–191 Read article
-
A Systematic Review of Advanced Composite Materials for High-Performance Spur Gear Applications
Abstract: This is a review which provides specific and detailed information regarding the fiber-reinforced polymer (FRP) composite to replace traditional steel in high-performance spur gears with emphasis on mechanical performance, computational modeling, and experimental validation. Methods: The current literature was thoroughly investigated that includes material properties, material simulation (e.g., finite element analysis, FEA), and experimental gear testing procedures (e.g., DIN 51354, ASTM G99). Certain case studies in the aerospace and automotive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 209–220 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Design and Validation of an Artificial Intelligence-Driven Digital Twin for Real-Time Monitoring and Control in Polymer Composite Manufacturing
Abstract: Polymer Matrix Composites (PMCs) have become indispensable in high-performance sectors such as aerospace and automotive engineering, offering exceptional strength-to-weight ratios that outperform traditional metals in many demanding applications. However, the reliability of manufacturing PMCs via Vacuum-Assisted Resin Transfer Molding (VARTM) is frequently undermined by stochastic process variabilities. Unpredictable fluctuations in thermal history, preform permeability, resin rheology, and ambient conditions often lead to some defects; namely voids, dry spots, and incomplete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 224–233 Read article
-
Development and Mechanical Characterization of Polymer based Bio Composite Filaments for FDM Applications
Abstract: Additive Manufacturing (AM) is an advanced fabrication process capable of producing complex and intricate components to meet diverse industrial and customer demands. For small-scale producers and researchers, FDM is the most straightforward, affordable, and easily accessible of the several AM processes. The majority of conventional polymer feedstocks used in FDM lack sufficient mechanical strength and thermal stability, which limits their use in load-bearing or structural components. This effort aims to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 743–751 Read article
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Seismic Response Characterization of Vertically Irregular Multi-Storey Buildings Incorporating Mass and Stiffness Variations Using E-TABS Software
Abstract: The increasing demand for innovative architectural designs has led to the widespread use of vertically irregular configurations in high-rise reinforced concrete (RC) buildings. However, such irregularities significantly influence structural performance under seismic loading conditions, leading to complex structural behaviour and stress concentration at specific levels This study focuses on evaluating the seismic behaviour of vertically irregular multi-storey buildings using nonlinear time history analysis, which provides a realistic representation of structural …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 3, 2026 Read article
-
Fillet Weld Analysis Utilizing ANSYS: Study of Meshing Method
Abstract: The present paper discusses about all the aspects of the fillet weld–weld types, weld geometries, boundary conditions have been reviewed. A wide amount of literature survey has also been conducted. Weld toes and weld roots are the section where maximum stress is developed, also called as stress concentration zone. The present paper focuses on the fillet or T-joint type weld joint. ANSYS—a Finite Element (FE)—has been used to simulate the …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 1, 2016 · pp. 49–56 Read article
-
Comparison Between Theoretical, Analytical and Experimental Vibration Analysis Method and Different Circular Tile Cutter by Using FFT and ANSYS
Abstract: Circular cutters with uniform radial cracks are extensively used in the cutting processes. Unwanted noise, vibration and accidental failure associated with the cutting process have become an important economic and technological problem in the industry. The knowledge of natural frequencies of components is of great interest in the study of response of structures to various excitations. Hence, it is important to study a circular tile cutter with central hole, which …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 3, 2015 · pp. 31–42 Read article
-
Productivity of Hydraulically Fractured Calcite Rich Shale Reservoirs Enhanced by Acid
Abstract: The current low oil prices have highlighted the need for enhancement to current production from shale formations. Prolonging the production life and increasing productivity of the fracture network in the shale plays can be a way to improve the economics. Many shale wells, drilled and completed based on current completion strategies, show sharp decline after initial flash production. One of the reasons behind this can be attributed to closure of …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 54–68 Read article
-
Damage Detection And Its Repair And Rehabilitation Techniques In RCC And Steel Structures Using NDT
Abstract: In the paper along with Case studies Buildings and structures are normally designed for a specified target life based on the functional and economical aspects. It is due to the fact that the assumptions are made regarding durability of material without knowing the behaviour of material completely in real environment. The various tests are to be carried out to assess the causes & extent of distress, the quality/strength of concrete …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 64–68 Read article
-
Behaviour of Irregular Concrete Buildings under Seismic Forces
Abstract: The study of irregularities in a building is a fundamental parameter controlling the seismic response of buildings. From the past history of earthquakes, it is evident that the use of improper structural configurationswith plan irregularities and soft storeys has decisive effects on the seismic performance of buildings. The buildings with abrupt changes in storey stiffness have uneven lateral force distribution along the height, whichis likely to locally induce stress concentration. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 8–19 Read article
-
Parametric Effect on the Mechanical Property of Extrusion-Based 3D-Printed Parts
Abstract: Material extrusion-based 3D printing, a prevalent and economical approach for producing complex geometries, heavily relies on acrylonitrile butadiene styrene due to its advantageous mechanical properties and dimensional stability. Nevertheless, the mechanical integrity of 3D-printed components is considerably impacted by process variables. This research investigates the implications of critical parameters – layer height (LH), infill percentage (IP), and infill pattern design (IPD) – on the tensile, compressive, and flexural strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 160–170 Read article
-
Investigation of Areca Stem and Banana Stem fibre Hybrid Composites for Improved Strength and Sustainable Applications
Abstract: Research on natural fibre reinforced polymer composites as eco-friendly substitutes for traditional synthetic composites has intensified due to growing need for sustainable engineering materials. This work used the Taguchi L9 orthogonal array to experimentally examine and optimize the mechanical behaviour of hybrid epoxy composites reinforced with areca and banana fibres. The impacts of epoxy matrix composition, areca and banana fibre content on the composite’s tensile strength, impact strength, flexural strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Meshing Methods Effect on Double Fillet Weld Finite Element Analysis
Abstract: Finite element analysis of the double fillet weld joint has been conducted in the present paper. Effect of the meshing techniques has also been shown. Meshing is a very important stage which can affect the finite element results by a large amount. There are different meshing options like sizing, refinement and inflation, available; other than that, different meshing methods are also available. Meshing methods studied in the present work are; …
Published in Journal of Advancements in Robotics · Vol. 3, Issue 2, 2016 · pp. 10–15 Read article
-
Fatigue Assessment of Longitudinal Stiffener End Connections for Ageing Tankers
Abstract: Abstract The world tanker fleet is ageing. In this situation it is essential to ensure that the transportation of oil and gas is carried out by quality vessels. This is possible with old tankers as long as their condition can be properly assessed. Since the 80’s relatively few new-buildings have been ordered and this has opened for operation of tankers up to 30 years of age. Ship and offshore structures …
Published in Journal of Offshore Structure and Technology · Vol. 3, Issue 1, 2016 · pp. 1–12 Read article
-
Eddy Current Imaging Technique for Quantitative Analysis of Defects in Aircraft Components
Abstract: Aircraft industry’s concern is primarily in the area of safety of components and structures and it is extremely important to constantly evaluate and monitor the structures and systems for defects and anomalies noninvasively, thereby preventing unplanned outages and shutdowns as also catastrophes. To accomplish this, different nondestructive testing techniques have been in use since decades. Each technique is unique by itself and has its associated advantages and limitations; a suitable …
Published in Journal of Aerospace Engineering & Technology · Vol. 2, Issue 1, 2012 · pp. 1–5 Read article
-
Enhancing Abiotic Stress Tolerance in Banana (Musa spp.) Using In Vitro Methods and Conserving Germplasm
Abstract: Both biotic and abiotic stressors are the main factors limiting banana output. Research on biotic stressors in bananas has received enough attention globally, whereas abiotic stressors receive less attention. Water availability, salinity, and a wide variety of temperatures are the main problems that must be resolved to maintain banana farming in the twenty-first century. Samples were introduced with water, salt and heat stresses in invitro condition. Under different stress and …
Published in Research and Reviews : Journal of Crop science and Technology · Vol. 14, Issue 1, 2025 · pp. 9–15 Read article