Search
713 articles for “high-performance materials”
-
Tailoring The Electrochemical Interface of Graphene–Gd₂O₃ Nanocomposites for Advanced Energy Storage
Abstract: Graphene–Gd₂O₃ nanocomposites were synthesized by incorporating varying concentrations of reduced graphene oxide (rGO) into Gd₂O₃ using a straightforward room-temperature solution method. The composites were analyzed using various distinct characterization techniques, including X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Electrochemical measurements, particularly cyclic voltammetry (CV), demonstrated that the incorporation of graphene significantly enhanced the electrochemical performance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 369–388 Read article
-
Activated Carbon Materials as Ideal Adsorbents for the Desulfurization of Fossil Fuels
Abstract: Removal of organosulfur compounds from diesel is of interest from scientific, social, economic, and environmental viewpoints. Production of clean fuel remains a primary goal of the petroleum refining industry. The reduction of sulfur content below stringent ppm levels in diesel fuels becomesincreasingly challenging due to the presence of sterically hindered sulfur compounds, such as 4,6- dialkyldibenzothiophenes, which are resistant to removal over conventional supported mixed sulfide hydrodesulfurization catalysts. Consequently, alternative …
Published in International Journal of Pollution: Prevention & Control · Vol. 4, Issue 1, 2026 · pp. 28–34 Read article
-
Effect of Fiber Weight Fraction on the Mechanical Performance of Calotropis Gigantea Fiber-Reinforced Polyester Composites
Abstract: Natural fiber-reinforced composites have attracted more attention as environmentally friendly substitutes to synthetic materials since the move towards a sustainable approach to engineering materials has gained in popularity. This paper focuses on the potential use of Calotropis gigantea (CG) stem fibers as laminate reinforcement with bio-composites made through an unsaturated polyester resin (GP) system. Super strength fibers were pulled out, treated with alkaline to boost interfacial adhesion, and positioned in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 339–349 Read article
-
Comparative Analysis of the Structural Integrity and Dimensional Stability of Additively Manufactured Biopolymers vs. Thermoformed PETG: A 1-Year Retrospective Study on Polymer Performance in Orthodontic Applications
Abstract: Objective: This study aimed to evaluate the long-term dimensional accuracy and structural performance of direct 3D-printed biopolymers compared to conventional vacuum-formed Polyethylene Terephthalate Glycol (PETG) composites. The investigation focused on how different polymer processing methods (additive manufacturing vs. thermoforming) influence material thinning and resistance to occlusal stress. Methods: A retrospective analysis was conducted on 60 cases (n = 60) of post-orthodontic maintenance. The sample was divided into two cohorts: Group …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 140–146 Read article
-
Enhancing Mechanical and Durability Properties of Coconut Shell Concrete Using Fly Ash
Abstract: The increasing demand for sustainable and lightweight construction materials has driven research into alternative aggregates for concrete production. This study investigates the mechanical and durability properties of coconut shell (CS) concrete with varying percentages of fly ash replacement. The research evaluates compressive strength, split tensile strength, water absorption, and workability to determine the feasibility of CS concrete as a structural material. Experimental findings indicate that incorporating 10% fly ash (CSF10 …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 19–24 Read article
-
In-depth Evaluation of the CBR Method in Flexible Pavement Design
Abstract: The California Bearing Ratio (CBR) value of the subgrade is a crucial parameter utilized in the design of flexible pavements, as recommended by the Indian Roads Congress (IRC). The choice of materials used in constructing the pavement can significantly influence its overall design and performance. Pavements play an essential role in ensuring traffic flows smoothly, safely, and efficiently. Generally, pavements are categorized into two types: flexible and rigid. Flexible pavements …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 1–6 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Intelligent Automated Guided Vehicle (AGV) System for Optimized Material Handling
Abstract: This project is the development of an Automated Guided Vehicle (AGV) system that has been developed to handle materials in the high-accuracy, reliability, and efficiency in industrial settings. The AGV is a combination of a blend of advanced technologies including sensor fusion, real-time path planning, and AI-based navigation to allow smooth and intelligent operation with minimal human intervention. The vehicle is able to efficiently identify, and evade obstacles by using …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Deep Learning-Based Thermal Prediction Models for Solid-State Electronic Devices
Abstract: The rapid advancement of solid-state electronic devices in high-performance computing, communication systems, automotive electronics, and renewable energy applications has significantly increased concerns related to thermal management and device reliability. Excessive heat generation in semiconductor devices adversely affects operational efficiency, switching performance, lifespan, and overall system stability. Traditional thermal prediction methods often require complex numerical computations and extensive simulation time, making them less suitable for real-time monitoring and adaptive control applications. …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article
-
Potential of Particle Size Mix Ratios of Plantain Ogoni Red with Clay Soil: The Integrity of Adsorbent Performance in AGO Treatment in Fresh Water Environment
Abstract: The research is focus on monitoring the performance of various formulated adsorbent mix ratio of clay soil with some agro-based materials in treatment of contaminated water environment. The agro-based material used was Plantain Ogoni Red (POR) and fresh water environment was used for this research. The agro-based material was processed into different particle sizes of 150 𝜇m, 300 𝜇m, 600 𝜇m and 1.18 mm and the clay soil into fine …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 3, 2024 · pp. 12–25 Read article
-
Recent Trends in Rotary Kiln and Refractory Material Patterns in Cement Production: A Review Approach
Abstract: The manufacturing of cement and other industrial operations depend heavily on rotary kilns, which use refractory materials to endure high temperatures and challenging chemical conditions. With an emphasis on their effects on durability and operating efficiency, this study looks at the most recent developments in rotary kiln technology and refractory material choices. Various rotary kiln designs, typical refractory material patterns, and the difficulties posed by kiln failures are all covered. …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 27–34 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
Eco-Efficient Skies: Life Cycle Assessment and Carbon Footprint Minimization of Fiber-Reinforced Polymer Composites in Aerospace Application
Abstract: The increasing integration of fiber-reinforced polymer (FRP) composites in aerospace structures necessitates a rigorous evaluation of their environmental sustainability throughout their entire life cycle. This study presents a comprehensive life cycle assessment (LCA) and carbon footprint analysis of carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP) composites applied to structural and semi-structural components in commercial aerospace applications. Following ISO 14040/14044 standards and employing the ReCiPe 2016 Midpoint (H) impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–160 Read article
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Emerging Paradigms in Parallel Computing: Trends and Innovations
Abstract: Parallel computing is at an inflection point with revolutionary new paradigms and technologies. The goal of this paper is to survey the recent trend in parallel computing from architecture, programming model and applications. Mahajan cites a litany of architectural developments such as heterogeneous computing systems with integrated graphics processing unit/central processing unit ; the emerging promise from quantum and neuromorphic architectures (please see later); advances in packing transistors using novel …
Published in Recent Trends in Parallel Computing · Vol. 12, Issue 1, 2025 · pp. 39–43 Read article
-
Thermal Conductivity and Energy Storage Performance of Paraffin Wax-Based Composites Reinforced with Amine Functionalized Graphene as a Nanofiller
Abstract: In this study, amine-functionalized graphene (AFG) was employed as a nanofiller/nanomaterial to enhance the thermal and structural properties of a paraffin wax (PW)-based polymeric composite, formulated as a phase change material (PCM). The PW/AFG composite was synthesized with varying nanofiller volume fractions (0.20%, 0.40%, 0.80%, and 1.60%), and its thermal conductivity, stability, and energy storage performance were systematically analyzed. The incorporation of AFG into the polymer matrix significantly improved the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–374 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Experimental Analysis of Nano-carbon Doped Alumina for Industrial Applications
Abstract: The use of nano-carbon metal matrix composites can provide a solution to the enduring issue of optimal material selection and optimization for getting metal-insulator transition (MIT) behavior at a particular frequency at ambient temperature. Other substances, like two-dimensional (2D) transition metal dichalcogenides (TMD), vanadium oxide (VO2), and germanium telluride (Ge-Te), have difficult challenges in achieving effectively the MIT property at a given frequency and temperature. It is also difficult to …
Published in Journal of Polymer & Composites Read article
-
Dynamic deformation and microstructural characteristics of AA5083 under the influence of electrochemical behaviour using equal channel angular pressing
Abstract: Large-scale Equal channel angular pressing is a great engineering material that has more potential for AA5083 industrial applications. Uniaxial dynamic compressive tests across a temperature of 448 K were conducted for the ECAP technique AA5083 in order to create such a design framework. The microstructure was described using transmission electron microscopy and scanning electron microscope both before and after dynamic loading. The plastic flow behaviour of the AA5083 was described …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 95–112 Read article
-
Integration of Nanotechnology in Electric Vehical Technology: A Comprehensive Review
Abstract: The integration of nanotechnology in electric vehicles (EVs) heralds significant advancements in energy storage, efficiency, and overall vehicle performance. This paper explores the current state and future potential of nanotechnology applications in EVs, focusing on battery technology, lightweight materials, and energy conversion systems. In battery technology, nanostructured anodes and cathodes, such as silicon nanowires and lithium iron phosphate nanoparticles, enhance energy density and charging rates. Solid-state electrolytes with nanocomposite materials …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 1, 2024 · pp. 29–34 Read article