Search
1033 articles for “improved properties”
-
Bio-Inspired FGPCs for Biomedical and Structural Applications
Abstract: Bio-inspired functionally graded polymer composites (FGPCs) represent a new class of smart materials that use gradient material distributions to enhance mechanical and biological properties, mimicking natural systems like bones, shells, and plant stems. FGPCs exhibit smooth gradient distributions across interfaces, which improves biocompatibility and reduces the risk of failure under complex loading and environmental conditions. In this study, bio-inspired FGPCs were designed, fabricated, and validated using a combined experimental and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 456–481 Read article
-
AEROGELS – A VALUE ADDITION TO HARVEST SOLAR ENERGY
Abstract: Aerogels are a class of synthetic porous ultralight material that was created in 1930 and derived from a gel, in which the liquid component has been replaced with a gas without collapsing the gel structure by freeze-drying. It is made of silica, but carbon, iron oxide, gold, copper, polymer etc. can also be used. During freeze drying the liquid in the gel is slowly dried off without collapsing the solid …
Published in Journal of Thermal Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 23–39 Read article
-
Use of Additives in Soil Stabilization
Abstract: Soil stabilization is a ground improvement technique through which soil is made strong enough to bear the structures load. The swell-shrink properties of expansive soils can be reduced and made useful for construction purposes using various stabilizing materials like cement, lime, fly ash, chemicals, etc. Cement stabilization causes environmental pollution. Microbial-induced carbonate precipitation and enzymatic-induced carbonate precipitation methods can be considered as innovative methods in place of cement soil stabilization. …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 1, 2021 · pp. 33–40 Read article
-
Investigating The Mechanical Properties of Sisal/Areca/Sisal Natural Fiber Reinforced Composite Material Treated with NaOH and Filled with Al2O3 and Tio2
Abstract: Biopolymer-based composites which are obtained from the natural resources like plants, animal or mineral based have recently attracted significant interest because they can be used in interesting ways in biology and materials science. These materials are generally non-toxic, reusable, and recyclable, which are useful in many situations where sustainability and environmental protection are important. Plant Based fibers like Bamboo, Coir, Kenaf, Banana, Sisal, hemp and jute are proving their potentiality …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 413–425 Read article
-
Investigation of Mechanical Properties in Ductile Iron with Alloyed and Unalloyed at Time and Temperature on Austempering
Abstract: Due to the combination of its numerous excellent mechanical qualities, the flexible iron has been used more and more since its invention in 1948. To develop significantly improved characteristics, the unnecessary investigation is being done. The most recent development in the field of flexible iron, or SG iron, is Austempererd malleable iron. At four different temperatures, two different types of spheroidal graphite (SG) cast iron samples with varying copper weight …
Published in Journal of Polymer & Composites · Vol. 11, Issue 9, 2023 · pp. 1–9 Read article
-
Quality Sustainability Of Recycled High Density Polyethylene (HDPE)
Abstract: The main way to reduce the generated large amounts of polymer waste is their recycling, their return to the processes of processing and reuse. The main and most commonly used method is mechanical recycling, in which some of the characteristics of the processed material deteriorate. It is known that the properties of the recyclate are most significantly affected by the homogeneity and the degree of aging of the end-of-life plastic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 28–37 Read article
-
Artificial Intelligence for Polymer and Nanocomposite Materials: Performance Prediction, Manufacturing Optimization, and Future Perspectives
Abstract: The exceptional mechanical properties, design flexibility, and lightweight nature of polymer composite and nanocomposite materials make them indispensable in a wide range of applications, including aerospace, automotive, construction, biomedical, and energy sectors. The optimization of the strength, durability, and manufacturing efficiency of polymer composite and nanocomposite materials is highly challenging because their performance depends on matrix composition, reinforcement type, fiber or nanoparticle distribution, interfacial interactions, processing conditions, and environmental factors. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
A Review on Phytochemistry and Pharmacological Properties of Curcuma amada (Zingiberaceae)
Abstract: Plant has been employed in traditional medicine since ancient times. Curcuma amada Roxb. (Mango ginger), is a member of Zingiberaceae family and the Curcuma genus. It is a distinctive spice that shares a similar appearance with ginger but provides a raw mango taste. It is considered as a valuable plant in traditional medicine which plays a crucial function in both the food and pharmaceutical industries. Ayurveda and Unani medicinal traditions …
Published in Research & Reviews : Journal of Herbal Science · Vol. 13, Issue 3, 2024 · pp. 10–20 Read article
-
Environment- friendly Pavement Construction Using Plastic Trash and Reclaimed Asphalt Pavement-An Overview
Abstract: Plastic pollution has emerged as a significant environmental concern, with detrimental effects on ecosystems and human health. As a waste product contaminating air, water, and land, plastic poses a grave threat to the environment, perpetuating a global crisis. Its non-biodegradable nature means that once produced, plastic persists indefinitely, accumulating in landfills, water bodies, and natural habitats. This widespread accumulation of plastic waste not only compromises the aesthetic value of landscapes …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 116–123 Read article
-
A Study on Friction Stir Processing Effected on Hardness and Tensile Properties When Single Pass and Double Pass Is Considered Using Al 6061 And Steel Material
Abstract: The principle of friction stir welding was initially employed to build the emerging technology known as friction stir processing, or FSP. FSP has shown to be a successful method of developing face mixes and increasing the material's mechanical parcels. Aluminum blends are among those accoutrements over which the FSP can be performed successfully. The study comprised the careful processing of steel and Al 6061 samples using both single and double …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 16–23 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Optimizing Green Composites for Automotive Applications Using Taguchi-Based Grey Relational Analysis
Abstract: The increasing demand for sustainable and lightweight materials in the automotive industry has driven the exploration of green composites as an alternative to conventional synthetic composites. This study focuses on optimizing the mechanical properties of green composites using Taguchi-based Grey Relational Analysis. Four natural fibers—pineapple, sisal, coir, and Nava—were reinforced with cashew resin and synthetic resin matrices, incorporating silica and granite fillers of varying sizes. Key properties, including hardness, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 743–754 Read article
-
ROLE OF SHODHANA KARMA IN IMPROVING EFFICACY OF RASA DRAVYA
Abstract: Shodhana which literally means purification and converting drugs suitable for further procedure. Shodhana is procedure necessary for every drug before taking it for pharmaceutical and therapeutically purposes. The aim of Shodhana is to remove the physical and chemical properties in the sample of raw drugs. Shodhana is also meant for Marana process of minerals and metals for further internal uses. Shodhana is a process which not only eliminates physical and …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 7, Issue 1, 2018 · pp. 33–36 Read article
-
Exploring the Bioactive Potential of Himalayan Lichens: Phytochemical and Antimicrobial Profiling of Xanthoparmelia tinctina and Pyxine subcinerea Extracts
Abstract: The symbiotic association that develops between cyanobacteria, algae, and fungi results in the composite organism known as lichens, which has traits similar to those of plants but differs in its separate parent organisms. Lichens can have a variety of morphological characteristics, including foliose structures that resemble flat leaves, crustose structures that resemble flake crystals, fruticose branches that have short, leafless branches, and leprose-powder-like appearances. Due to their therapeutic potential, lichens …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 14, Issue 2, 2024 · pp. 21–28 Read article
-
AI-Driven Innovation in Biomaterials: Predictive Modeling and Design for the Future
Abstract: The integration of artificial intelligence (AI) is revolutionizing the field of biomaterials, paving the way for innovative approaches in their development and production. This paper examines the connection between AI and biomaterials, emphasizing the substantial impact of predictive modeling on the evolution of the field. By examining recent research and cutting-edge uses, the document shows how AI-powered predictive modeling has revolutionized biomaterial design, marking a period of unparalleled precision and …
Published in Trends in Machine design · Vol. 11, Issue 3, 2024 · pp. 25–35 Read article
-
Fabrication and Properties of Recycled PET Reinforced Waste Cellulosic Fiber Composites
Abstract: The economic utilization of lignocellulose waste, which is now being explored, is one of the environmental problems confronting third-world nations. Waste cellulosic fiber (paper sludge, PS) composites will enable the cost of the composite to be reduced while allowing for the efficient use of a waste material that is presently burned or buried. Environmentally friendly composites made from PSreinforced recycled poly(ethylene terephthalate) (rPET) matrix with the addition of SEBS-g-MA as …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 1, 2023 · pp. 9–20 Read article
-
Development of PU/Graphene Anticorrosion/antifriction coatings
Abstract: Corrosion inhibition and reduction of frictional wear is a necessary requirement in launch vehicles. Organic coating proves to be the cheapest and most advantageous owing to its high mechanical resistance and high adhesion, better chemical stability, low permeability for corrosive components etc. Among the organic coatings reported, Polyurethane is found to be the most suitable candidate it being relatively durable, softer and more elastic than other organic coatings. However, graphene …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 45–56 Read article
-
Role of Neuropeptides in the Treatment of Major Depression Disorder: The Recent Updates
Abstract: Revelation of the part of neuropeptides as signaling atoms within the nervous system raised trust within the pharmaceutical field approximately 25. long time back Many neuropeptides, especially CRH, AVP, and substance P . whose receptors are presently focused on by little atoms to diminish side effects of discouragement and uneasiness, shows up to be related to the improvement and movement of temperament disarranges trouble. Neurotrophins, not exactly neuropeptides, may also …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 14, Issue 3, 2024 · pp. 1–12 Read article
-
Sustainable Epoxy Composites Enhanced by Cellulose Nanocrystals for Structural and Thermal Applications
Abstract: This study presents the advancement and behaviour analysis of sustainable nanocomposites reinforced with cellulose nanocrystals (CNCs), a biodegradable and high-aspect-ratio nanofiller derived from microcrystalline cellulose. CNCs were incorporated into a bisphenol-A-based epoxy matrix at varying concentrations (0, 1, 3, 5, and 7 wt%) to assess their influence on mechanical, thermal, and viscoelastic properties. The tensile strength of the composites increased significantly, from 45 MPa for neat epoxy to 65 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 126–134 Read article