Search
1974 articles for “fine/course mobile signal” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Self-Driving Autonomous Car
Abstract: The goal of this project is to create an autonomous vehicle that can drive itself safely and intelligently without the possibility of human error. This Raspberry Pi-based project can recognize traffic lights and obstacles. It is able to make an informed judgment regarding whether to halt or carry on along the current course by comparing the data processed with the data supplied to it. The hardware platform, that consists of …
Published in Current Trends in Signal Processing · Vol. 13, Issue 1, 2023 · pp. 12–18 Read article
-
High Performance Liquid Chromatography: A short review
Abstract: High performance liquid chromatography ( HPLC) is an important qualitative and quantitative technique commonly used for estimating chemical , pharmaceutical and biological samples. It is the most versatile, reliable, safest and fastest chromatographic technique for the quality control of drug components. This article was prepared with the intention of reviewing various aspects of HPLC, such as theory, instrumentation, form, application and limitation.
Published in Emerging Trends in Chemical Engineering · Vol. 7, Issue 2, 2020 · pp. 20–26 Read article
-
Surface Roughness in Traverse Cut Cylindrical Grinding of Phosphor Bronze
Abstract: In the present work, traverse cut cylindrical grinding process has been analyzed and optimized to obtain desired surface roughness while machining of phosphor bronze material. Experiments have been planned as per Taguchi’s L16 orthogonal array. Four levels of the input parameters have been used. The parameters are: longitudinal feed, work-speed and in-feed. The results have been studied, plotted and discussed. The effect of process parameters on responses have been analyzed …
Published in Journal of Automobile Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 20–24 Read article
-
Do Networks Fly: A Review on FANET
Abstract: During the previous decades, a lot of work has been done on UAVs due to advancement in the electronics, sensor fields which makes UAVs less costly. UAVs are a component of UAS, which include a UAV, a ground-based controller, and a system of communications between the two. To cope up with the problem of disaster recovery efficiently there is a need to use an intelligent and sophisticated technology called flying …
Published in Journal of Automobile Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 13–19 Read article
-
A Comparison on Driver Fatigue/Drowsiness Detection Methods
Abstract: The rapid improvements in the automobile industry have made our vehicles more powerful, easier to drive and control, safer, more energy efficient, and more environmentally friendly. The accidents caused today by cars are mainly due to the driver fatigue. Driving for a long period of time causes excessive fatigue and tiredness which makes the driver sleepy or loose awareness. The rapid increase in the number of accidents seems to be …
Published in Journal of Automobile Engineering and Applications · Vol. 4, Issue 1, 2017 · pp. 29–33 Read article
-
Experimental Analysis of Filler Slab Using Self-Compacting Concrete
Abstract: Present-day self-compacting concrete is classified as an advanced construction material. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It can flow under its weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogeneous and has the same engineering properties and durability as traditional vibrated concrete. An important improvement of health and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 3, 2016 · pp. 15–24 Read article
-
Microgrid System Control Identification and Evaluation for Enhanced Dynamic Operation
Abstract: Networking the distributed generators (DG) in a microgrid system involves a large number of electronic components and filters. Small changes or drifts in operating conditions as well as disturbances at the point of common coupling can excite the associated eigenvalues giving rise to slowly growing instability in the system. This article considers the stability of a microgrid system consisting of a micro alternator, wind generator, photovoltaic (PV) system, fuel cell …
Published in Journal of Control & Instrumentation · Vol. 9, Issue 1, 2018 · pp. 33–44 Read article
-
Implementation of Laplace Transform in Various Science and Engineering Field and Relation of Laplace Transform with Z-Transform
Abstract: In this paper, applications of Laplace Transform and Z-transform in different science and engineering fields have been analyzed. The applications of Laplace Transform are useful in various areas of electrical engineering, control engineering, physics, signal processing, automation engineering. Z-transform is used to convert discrete time domain signal into discrete frequency domain signal. It has wide range of applications in mathematics and digital signal processing. It is mainly used to analyze …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 36–40 Read article
-
Smart Electronic Real Time Text Recognition Application
Abstract: AbstractThe area of application of optical character recognition has been expanded in the last few years. There are many techniques which exist and provide high recognition rate, but it consumes time in training the network. Various mobile applications have been designed for optical character recognition (OCR) in Android platform and iOS platform. The limitation of such application is computation ability of mobile processor. This paper proposes a framework of optical …
Published in Journal of Electronic Design Technology · Vol. 8, Issue 3, 2017 · pp. 1–7 Read article
-
Design and Development of a Multifunction FPGA-based Data Acquisition System using Nonlinear Duty-cycle Modulation Technique
Abstract: AbstractA new generation of DAQ based on duty-cycle modulation technique is presented. It describes the design and prototyping of a FPGA-based data acquisition and signal generation board using the duty-cycle modulation technique and with computer-based software interface. The system is built around the DE0-Nano development board that embeds an Altera cyclone IV FPGA in which a NIOS II processor running at 100 MHz has been instantiated. The conversion technique from …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 3, 2019 · pp. 8–26 Read article
-
A Suboptimal Nonlinear Duty-cycle Modulation Scheme
Abstract: The DCM (duty-cycle modulation) technique is increasingly used in industrial electronics applications, including instrumentation systems, interfacing drivers and signal transmission chains. However, in existing research works related to new applications of DCM technique, the linear approximation policy is used for the sake of structural simplicity and low implementation cost, at the expends of rigorous analysis and low approximation errors. In this paper, a suboptimal nonlinear DCM scheme is developed. It …
Published in Journal of Electronic Design Technology · Vol. 7, Issue 1, 2016 · pp. 22–31 Read article
-
A Novel Architecture of Control System Processor Using Field Programmable Gate Array
Abstract: This paper presents a reconfigurable architecture of control system processor. The performance of the proposed architecture has been evaluated by taking different controllers and phase lead and phase lag networks. We designed the architecture of the processor and realizing the architecture using adder, multiplier, delay unit and validate it in the FPGA, which show that the hardware scheme is feasible for practical application. The experimental results clearly reveal the novelty …
Published in Journal of Microcontroller Engineering and Applications · Vol. 2, Issue 2, 2015 · pp. 13–20 Read article
-
Optimization of Machining Parameters in Electric Discharge Machining of Al 65032
Abstract: Electric discharge machining has the potential to maintain surface topography and produce less stresses and destruction to the components. In this machining there is no contact between the tool and the work piece. The spark generated due to the electrostatic field generation between tool and the work piece. The objective of this experimentation was to create guidelines for electric discharge machining of Al 65032. Aluminum alloy 65032 is one of …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 15–22 Read article
-
Optimization of TIG Welding Process Parameters of Ss 304 By Taguchi Method and Grey Relation Analysis
Abstract: TIG welding is one of the widely used welding processes in manufacturing industries. In any of the welding processes, many factors play a vital role in obtaining strength of welding joint like bead geometry. So, there is need of optimizing the TIG process for a better so in this paper optimization of various TIG parameters have been done like bead geometry, penetration, and HAZ (Heat Affected Zones) on the basis …
Published in Journal of Production Research & Management · Vol. 9, Issue 3, 2019 · pp. 27–40 Read article
-
Implementation of Automated Pesticide Sprinkler in Existing Crop Cultivation Culture
Abstract: Advancement in agriculture helps in finding new solutions to improve efficiency. A way is to inculcate available data systems and technologies in the form of more smart machines to decrease wastage and focus on more efficient energy systems. We are now working towards sustainable in the 21st century. Today, mobiles and smart phones have become the most inseparable things in our lives. Smart Phones running on android applications are becoming …
Published in Journal of Production Research & Management · Vol. 10, Issue 2, 2020 · pp. 13–16 Read article
-
Improved Automated Car Parking System
Abstract: This research proposed an improved automated car parking system designed to minimize the area or control the influx of cars into a car park using a smart medium. The major problems of the car parking system are lack of authentication and validation system, no accurate detecting measures of the presence of cars and no proper measures for car security against car theft. However, the improved automated car parking system is …
Published in Journal of Semiconductor Devices and Circuits · Vol. 9, Issue 2, 2022 · pp. 17–27 Read article
-
Performance of Network Node in Presence of Sinkhole Attack in MANET
Abstract: AbstractMobile ad hoc networks (MANET) are wireless mobile nodes that communicate without any predefined infrastructure. MANET routing protocol acting an important role to get these types of communication. The two routing protocols which are DSR and AODV have been studied in specified form. Most of the attacks on MANETs are routing protocol attacks. The sinkhole attack is a type of routing protocol attack which is further affecting the network by …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 1, 2018 · pp. 6–13 Read article
-
Wireless Sensor Network in Agriculture: A Review
Abstract: The communication and remote sensor systems have advanced a lot, paving their way in the agriculture sectors also. Precision agriculture is one such example of this advancement. This paper gives a brief blueprint of energy efficient ways for precision agriculture utilizing wireless sensor networks (WSN). A topology under control wireless sensor network with stationary sensor hubs and portable base station, a topology is decided keeping in mind the end goal …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 24–28 Read article
-
Automatic Switch cum Fuse IC for Low Voltage, Low Power, High Performance Current Conveyors
Abstract: The paper focuses on the analysis of switch cum fuse IC in signal processing. In signal processing it is proposedto prevent the damage of main IC from the external electrical fluctuations which are common in -these days. Theproposed FUSE IC is also able to act as fuse for many times for main IC so that it can prevent the damage. It’slike the work of MCB but a step ahead that …
Published in Journal of VLSI Design Tools and Technology · Vol. 1, Issue 1-2-3, 2011 · pp. 21–25 Read article
-
Modelling of Skin Effect in On-Chip VLSI RLC Global Interconnect
Abstract: This paper addresses one of the aspects of the high frequency effects, namely the skin effect. The basicproblem with skin effect is that it attenuates the high frequency components of a signal more than that ofthe low frequency components. Due to the increase in operating frequency and die sizes, RC models arebecoming insufficient for analysis of global VLSI interconnects. Accurate noise modelling for RLC lines isthus critical for timing and …
Published in Journal of VLSI Design Tools and Technology · Vol. 1, Issue 1-2-3, 2011 · pp. 31–44 Read article