Search
54 articles for “load-bearing structures”
-
New Insight into the Composition and Structure of Sizing Agent from NMR Spectroscopy
Abstract: Sized carbon fibers (CFs) are of commercial significance as they form the main load-bearing component in advanced materials, namely, carbon fiber-reinforced plastics (CFRPs). Much of the knowledge of sizing composition and the process of sizing is a subject of intellectual property rights owing to its commercial relevance. In this original research article, deeper insights into the structure and composition of the sizing agent used for the surface modification of commercial …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 06–23 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
The Effect of Quicklime on The CBR Value of Soft Soil Stabilized with Nickel Slag and Aluminium Hydroxide
Abstract: The construction of road structures on soft soils is prone to structural damage due to the low bearing capacity of the soil under the load imposed by vehicles. Chemical stabilization is a popular method used to increase the bearing capacity of soft soils. This study aims to examine the effectiveness of soft soil stabilization using a mixture of lime, nickel slag, and aluminium hydroxide to enhance soil bearing capacity. The …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 1, 2025 · pp. 1–8 Read article
-
Safety of Foundation of Building
Abstract: The design of a building's foundation requires careful consideration of the load intensity applied from the structure above. To ensure stability and safety, the foundation depth must be sufficient to support the loads effectively. For residential buildings, where the loads are relatively lower, a foundation base size of 2.5 × 2.5 meters or 3 × 3 meters is typically adequate. In contrast, for structures with significantly higher loads, such as …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 51–60 Read article
-
In-depth Evaluation of the CBR Method in Flexible Pavement Design
Abstract: The California Bearing Ratio (CBR) value of the subgrade is a crucial parameter utilized in the design of flexible pavements, as recommended by the Indian Roads Congress (IRC). The choice of materials used in constructing the pavement can significantly influence its overall design and performance. Pavements play an essential role in ensuring traffic flows smoothly, safely, and efficiently. Generally, pavements are categorized into two types: flexible and rigid. Flexible pavements …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 1–6 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Optimizing Vehicle Structures Using Functionally Graded Materials of Aluminum and Carbon Fiber Reinforced Polymer Composites
Abstract: This article investigates the optimization of vehicle structures through application of functionally graded materials (FGMs), specifically aluminium and carbon fibre reinforced polymer (CFRP) composites. Such materials, known as FGMs, are characterized by spatial variations in composition and structure designed to improve so-called performance attributes. For the purposes of this research, the material properties of aluminium and CFRP composites are taken to be randomly distributed in thickness direction of a FGM …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 478–489 Read article
-
A Comparative Study of the Structure-Property Relationships in CAD/CAM Milled vs. 3D-Printed High-Performance Polymers: Impact of Molecular Orientation on Abrasive Wear
Abstract: Background: The transition from subtractive to additive manufacturing in prosthetic dentistry has introduced significant variations in the macromolecular architecture of high-performance polymers. While CAD/CAM milling utilizes high-density, industrially polymerized blocks, 3D printing (Additive Manufacturing) relies on layer-by-layer deposition, which may induce anisotropic molecular orientation. This retrospective study investigates how these distinct manufacturing "thermal histories" influence the long-term abrasive wear resistance of PEEK and PEKK restorations.Materials and Methods: Data were retrospectively …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Polymer Chemistry-Guided Development of Biomimetic Composite Scaffolds
Abstract: Polymer chemistry plays a fundamental role in advancing biomaterials for anatomical tissue engineering, particularly in the design of composite scaffolds that replicate the intrinsic characteristics of native tissues. The regeneration of damaged tissues, especially within anatomically complex structures such as bone, cartilage, and skin, necessitates biomaterials that closely emulate the hierarchical architecture and biological functions of native extracellular matrices (ECMs). The capacity to replicate both mechanical and biochemical cues of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 7–13 Read article
-
Synthesis and Characterization of Graphene-Based Hydroxyapatite Using Hydrothermal Method for Its Biomedical Application
Abstract: Developing bone implant materials that combine biological compatibility with mechanical strength remains a major challenge in orthopedic research. Hydroxyapatite (HAp) closely mimics bone mineral and supports cell growth, but its brittleness limits load-bearing applications. To address this, a quaternary nanocomposite of hydroxyapatite (HAp), graphene (Gr), zirconia (ZrO2), and ferrocene (Fc) (Hap-Gr-ZrO₂-Fc) was synthesized through a one-step hydrothermal process. Graphene and zirconia provided reinforcement, while ferrocene contributed structural stability and carbon …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 120–135 Read article
-
Composition and Structure of Oil Finishing Agent †
Abstract: Use of oil finishing agent is widely used in the process of production of carbon fibers to impart unusual and exceptional strength to the carbon fibers, the key load-bearing component, of the advanced materials, namely, carbon fiber reinforced composites (CFRPs). CFRPs are being widely used in the realm of aeronautics, astronautics, aeronautics, geonautics, sports equipment, and many more. However, quite often, much of the knowledge on the composition of oil …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 1, 2025 · pp. 01–10 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
Interfacial Bonding Efficiency in Jute-Carbon Fiber Polyester Matrix Composites Evaluated Through Short Beam Shear and Interlaminar Fracture Toughness Testing
Abstract: The natural Fiber–synthetic Fiber hybrid composites are jute–carbon Fiber hybrid in polyester matrix which could be used in semi-structural applications of automotive, construction and marine industry as an eco-friendly and cost-effective alternative of conventional carbon Fiber reinforced polymer. But the hydrophilic nature of jute Fibers and the relatively inert surface of carbon Fiber's cause weak bonding at the interface of the polyester matrix, which causes premature delamination, poor interlaminar shear …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Improving Black Cotton Soil with Sodium Hydroxide and Fly Ash: An Assessment of Optimum Moisture Content, Dry Density, and California Bearing Ratio
Abstract: This study investigates the stabilization of Black Cotton Soil (BCS), an expansive clayey soil primarily composed of montmorillonite minerals, using sodium hydroxide (NaOH) and fly ash. Due to its high plasticity and significant volume changes with moisture, BCS is challenging for construction purposes. Adding NaOH and fly ash can potentially improve the soil's moisture tolerance, compressibility, and reduce its plasticity, making it more suitable for structural applications. The research evaluates …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 192–201 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Behavioural Study on Synthetic Fibre Reinforced Soil Cement Stabilized Blocks
Abstract: It has been shown that the most prevalent material is soil. It is essential to the manufacture of bricks. It is well known that burned bricks function well for masonry projects, providing durability and structural integrity that are vital for construction applications. Furthermore, a significant amount of heat energy is utilized during the heating process that creates them, thus emphasizing the energy-intensive nature of brick production. In addition, children are …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 265–292 Read article
-
The Quicklift: Redefining Car Jack Dynamics & Design
Abstract: A Jack is a tool that aids in raising the vehicles without considerable physical efforts and thereby reducing strain injuries. This paper is about designed model of Jack and performing the static analysis (viz:structural) with the help of Solid works software. The outcomes obtained demonstrates that jack can be used safely. Additional improvements to be made in the jack is by modifying the vertical cylindrical bar so that it can …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 86–92 Read article
-
Foundation of Building
Abstract: Recent trends in civil engineering underscore the importance of designing foundations that can withstand varying load conditions and environmental challenges. Selecting the appropriate foundation depth is critical for stability, particularly under intense loads. In regions with high rainfall, understanding maximum precipitation levels and water infiltration is vital. Water penetration into the soil can significantly reduce its load-bearing capacity, with saturation potentially lowering it by up to 50%. Foundations must also …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 12–19 Read article