Search
286 articles for “impact loading”
-
Measurement of Defects in Car Bearings and Its Effect on Ultrasonic Waves
Abstract: As one of the defects of roller bearings due to intermittent coupling forces and external impact loads,surface cracks due to corrosion or wear may have many defects for rotating machines. Surfacecracking on the bearing or its ball is one of the important factors in the efficiency of the bearing andits opening. It is useful to study these cracks and identify the type and size of these cracks for bearingsused in …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 44–49 Read article
-
Numerical Simulation of Crack Growth in Dynamic Loading Conditions
Abstract: Because it is crucial for forecasting structural failures in engineering applications, crack formation in materials under dynamic loading circumstances has become a crucial study topic. In this work, finite element methods (FEM) are used to numerically simulate fracture propagation in dynamic stress situations. The impact of loading rates, material characteristics, and crack geometries on crack growth patterns are assessed in a thorough parametric research. The work uses sophisticated computational methods …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 30–34 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Experimental investigation on impact resistance and energy absorption of multicell thin walled glass fibre reinforced polymer composite
Abstract: The objective of this study is to explore the behaviour of different types GFRP cell structures under dynamic load testing. In this study we have designed, fabricated, tested and analyzed specimens of different configurations (Cylindrical structure – 1 cell, 2 cell and 4 cell) using Glass Fibre Reinforced Polymer (GFRP). GFRP constituents are Glass fibre of 200 GSM with L-12 epoxy and K-6 hardener. Test specimens were manufactured by conventional …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 85–95 Read article
-
Design, Mathematical Modeling, and Dynamic Optimization of a Speed Breaker-Based Vehicular Kinetic Energy Harvester
Abstract: Decentralized energy harvesting methods are becoming more popular due to rapid urbanization and the rising need for sustainable infrastructure. The road-embedded vehicle kinetic energy harvester (VKEH) design, mathematical modelling, and experimental validation are presented in this work. This paper presents the structural engineering, continuum mathematical modeling, and experimental validation of an optimized road-embedded vehicular kinetic energy harvester (VKEH). The mechanism utilizes a spring- loaded, low-friction rack-and-pinion transmission coupled with a …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 2, 2026 Read article
-
Design And Analysis of Carbon Filler Reinforced Composite Small Wind Turbine Blades
Abstract: Although wind turbines have great potential for capturing wind energy, their blades suffer from unstable aerodynamic loads as a result of operating for extended time in challenging conditions. Both structural and aerodynamic performance are negatively impacted by these loads. The effectiveness of the wind turbine and the use of wind energy are significantly impacted by the choice airfoil. Commonly used airfoils include NACA 4412, NACA 23012, and SG6043. The lift …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 79–89 Read article
-
Voltage and Power Quality Control in Wind Power Application by Dynamic Compensation
Abstract: Power quality problem is a critical problem in a power system. Most of the pollution problems created in power system is due to the nonlinear nature of loads. Due to large amount of non-linear equipment, impact and fluctuating loads (such as locomotive, arc-furnace, welding equipment, etc.); wind power as a rule, does not contribute to voltage regulation in grids. Also wind power very often is a source of voltage sag …
Published in Trends in Electrical Engineering · Vol. 4, Issue 1, 2014 · pp. 1–8 Read article
-
Variables Influencing the Reinforcing Effect of Organoclay in Polymer Nanocomposites
Abstract: This study examines how several factors affect the mechanical and thermal characteristics, such as tensile strength, tensile modulus, impact strength, thermal decomposition temperature, and Vicat softening point tests of poly(vinyl chloride)/organoclay nanocomposites. The variables included three different organoclay loading levels, three different screw rotation speeds, and three different plasticizer contents. A co-rotating twin-screw extruder was used to create the poly(vinyl chloride)/organoclay nanocomposite via the melt intercalation process. The properties of …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 1, 2025 · pp. 55–64 Read article
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
Modeling the Influence of Microcrack Healing on Deformation of Asphalt Concrete Using NDT
Abstract: Asphalt concrete pavement practices heavy loading and environmental impacts through its service life. Micro cracks usually initiate and accumulate to form various types of distresses. However, asphalt concrete has the ability of self-healing with rest periods and hot environment conditions. The mechanical properties of Asphalt concrete is complex due to its dependency of temperature, loading frequency, and strain level. In this investigation, asphalt concrete specimens of wearing, binder and base …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 37–47 Read article
-
Study of High-rise Building with Varying Imposed Loads Condition for Lateral Load Excitation
Abstract: The demand for land has risen, causing scarcity and leading to a significant increase in the construction of tall residential and commercial buildings. With limited land and a growing population, expanding horizontally is not feasible, making multistory buildings the solution. Urbanization has led to the construction of numerous high-rise structures, emphasizing the need for a thorough understanding and analysis of these structures. The present study aims to determine the critical …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 92–106 Read article
-
Study of Mechanical and Thermal Properties of Unsaturated Polyester/CuO Nanocomposites
Abstract: AbstractThe CuO nano particles were synthesized from copper sulfate pentahydrate aqueous solution under the low hydrothermal condition at 80°C. The size of the CuO nanoparticles was calculated from TEM. FTIR spectra confirmed the formation of the CuO nanoparticles. Nanocomposites of unsaturated polyester resin with different loading of nano CuO fillers were prepared by casting method. The mechanical properties of the composites such as tensile behavior, flexural behavior, impact strength and …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 35–42 Read article
-
Dynamic Behavior of Asphalt Stabilized and Grid Reinforced Subgrade Soil
Abstract: The impact of repeated loading (punching shear) on Asphalt stabilized and grid reinforced subgrade soil have been investigated in this study. Specimens of 152mm diameter and 116 mm in height have been prepared, cured, and then tested using the pneumatic repeated load system PRLS. The deformation-load repetitions data were recorded for each case. Data were fed to the finite element software for the modeling process. An assessment was conducted to …
Published in Trends in Transport Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 1–9 Read article
-
A Review on Mechanical Behavior of Various Strength And Flexure Parameters on Hardened High Strength Fiber Reinforced Concrete (HSFRC)
Abstract: This Review paper presents the Study for effective use of different shapes Steel Fibre for enhancing Flexural capacity of High Strength Concrete Beam, Along with Compressive & tensile strength. The flexural tensile strength or modulus of rupture (MOR) of concrete generally referred to tensile strength is an important parameter for determining deflection, minimum flexural reinforcement and to compute the on-set of visible cracks in a concrete structure under flexure. It …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 1–5 Read article
-
Experimental Evaluations of the Tensile and Impact Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers
Abstract: In marine engineering design, polymeric composites reinforced with natural fibers are frequently used. Through hybridization, natural fiber plastic composites' mechanical properties can be improved. Assessing the performance of recycled newspaper fiber (rNF) and rNF/glass fiber (GF) hybrid polypropylene composites is the aim of the current experiment. Using maleic anhydride (MA) as a coupling agent, the effects of GF loading on the impact strength and tensile behavior of composite materials with …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 1, 2025 · pp. 30–39 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Enhanced Durability and Performance of Reinforced Concrete Beams through CFRP Wrapping: An Experimental Investigation
Abstract: Globally, maintaining and repairing aging reinforced concrete structures poses a significant challenge for the construction industry. Numerous structures built before modern earthquake-resistant design codes lack adequate seismic resilience. Additionally, evolving service requirements often necessitate strengthening existing structures to handle increased loads. While past research explored the effectiveness of various Fiber Reinforced Polymer (FRP) wrappings under specific conditions, limited studies have comprehensively compared the performance of Carbon Fiber Reinforced Polymer (CFRP) …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 37–49 Read article
-
Optimizing Vehicle Structures Using Functionally Graded Materials of Aluminum and Carbon Fiber Reinforced Polymer Composites
Abstract: This article investigates the optimization of vehicle structures through application of functionally graded materials (FGMs), specifically aluminium and carbon fibre reinforced polymer (CFRP) composites. Such materials, known as FGMs, are characterized by spatial variations in composition and structure designed to improve so-called performance attributes. For the purposes of this research, the material properties of aluminium and CFRP composites are taken to be randomly distributed in thickness direction of a FGM …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 478–489 Read article
-
Conductive Polymers for Electro-Mechanical Systems: Structure–Property Relationships and Mechanical Behavior Under Stress
Abstract: Conductive polymers represent a unique class of functional materials that combine the electrical characteristics of metals with the mechanical flexibility of polymers. These dual properties are critical for the next generation of electro-mechanical systems, including wearable sensors, soft robotics, structural health monitoring (SHM), and biomedical actuators. However, the mechanical performance of conductive polymers under diverse stress conditions—such as elongation, cyclic loading, bending, and impact—remains a key challenge, limiting their long-term …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 25–30 Read article