Search
940 articles for “fabric”
-
A Review on Quad Band Microstrip Antenna for GSM and GNSS Application
Abstract: Micropstrip or patch antennas are also known as a printed antenna fabricated on printed circuit board (PCB). Microstrip antennas are low cost, have a low profile, low weight and are easily fabricated [1]. They are used atmicrowave frequencies. In this review paper, a survey on quad band operations in patch antenna papers, which have been used by authors for designing of low profile, small compatible patch antenna, have been presented. …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Short Experimental Report on Lithographic Technique in Microfluidics
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is fabricated by the maskless lithography and indirect bonding technique. The sealing by indirect bonding technique is perform during the hard baking in maskless lithography. Dyed ethylene glycol is prepared as the working liquid. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven microfluidic flow of …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 3, 2021 · pp. 1–5 Read article
-
An Experimental Investigation on Hybrid Polymeric Composite Materials Reinforced with Sisal & Acacia Fiber
Abstract: AbstractThe demand for wood materials in the construction of building field is on the rise. This leads to the depletion of natural resources and encourages deforestation. The polymeric composite materials reinforced with natural fiber are being used as a wood substitute and is also used for fabricating interior parts of the automobiles. Acacia fiber is also added to the polyester resin, since it is good in compressive and tensile strength. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 19–24 Read article
-
Short Report on Polymer Based Automated Fluid Machines for Applications in Microfluidics
Abstract: In this experimental work, a couple of gradual expansion microchannels are fabricated by polymethylmethacrylate (PMMA) using the maskless lithography, hot embossing lithography and direct bonding technique. Dyed ethylene glycol and dyed water are the prepared working liquids. The CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record each surface-driven microfluidic flow of dyed ethylene glycol and dyed water in the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 23–28 Read article
-
Experimental Studies on the Passive Capillary Flow of Non-aqueous Working Liquids in PMMA Microfluidic Devices of Rectangular Cross-Sections
Abstract: The polymethylmethacrylate (PMMA) microfluidic devices are fabricated by the maskless lithography, hot embossing lithography and direct bonding technique. The effects of liquid viscosity, surface wettability and channel aspect ratio on the surface-driven capillary flow of non-aqueous working liquids are studied in the fabricated PMMA microfluidic devices. The working liquids are ethylene glycol, isopropyl alcohol (IPA) and ethanol. These experimental studies will be useful to manipulate different non-aqueous working liquids inside …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 29–33 Read article
-
Assessment on the Physical Characteristics of Polymer Materials for Additive Layer Manufacturing Processes
Abstract: Polymer materials have the capacity to morph into a soft form and flow when heated, then return to their original hardness when cooled, making them excellent for heat fabrication procedures. Acrylonitrile Butadiene Styrene (ABS) is a high-grade polymer with exceptional mechanical qualities and heat resistance that is commonly used in aircraft and vehicle manufacture. These polymers are mixed with other materials to create alloys, which are primarily used in the …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 1–9 Read article
-
Microstructure and Mechanical Characterization of AA390 and Si3N4 Metal Matrix Composite Using Severe Plastic Deformation
Abstract: Metal matrix composites (MMCs) have significant attention in recent years due to their potential for improved mechanical properties compared to conventional monolithic materials. This study focuses on the microstructure and mechanical characterization of a MMC comprising AA390 aluminum alloy reinforced with Si3N4 particles. The severe plastic deformation (SPD) process, Equal Channel Angular Pressing (ECAP), was employed to fabricate the composite with enhanced mechanical properties. The ECAP method was chosen as …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 17–30 Read article
-
MOS Capacitor: A Processing Tool
Abstract: In this modern world of technology, life without electronics is unimaginable. We are now living in the age of electronics. It is hard to find an electrical item in your home that does not have electronics part in it. The electronic devices give better efficiency and reliability in terms of power loss, speed and cost; the fundamental component of each Integrated Circuit (IC) chip, namely the MOSFET (metal oxide semiconductor …
Published in Journal of Semiconductor Devices and Circuits · Vol. 5, Issue 1, 2018 · pp. 27–32 Read article
-
Thin-in-slab-in-caster to Pursue Heat-in-treat
Abstract: This paper is to resolve the latest scenario in slab caster to suggest fabrication of slab after integrating as well successive next add an addendum formation to end production. Direct thin section produced from existing heat in cast thin slab has been utilized by successive roll reduction and also heat treatment. Endless strip processing (ESP) has linked continuous thin down formation to subject modification of microstructure from as cast to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 30–37 Read article
-
Practical Implementation of Network Switch on FPGA
Abstract: AbstractA network switch is a hardware device, which is used for device communication within a network. It uses a packet-switching mechanism to receive and transmit data to the target device. Network switches contain multiple ports that use media access control (MAC) address for transmitting data at the data link layer (layer 2) of the Open Systems Interconnection (OSI) model. This research aims to design a network switch on FPGA to …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 1, 2020 · pp. 14–19 Read article
-
High Gain Antenna Array (2x1 and 4x1) Design for WLAN Application
Abstract: Micro-strip antennas became very popular in 1970s primarily for space borne applications. Today they are used for government and commercial applications. These antennas consist of a metallic patch on a grounded substrate. The metallic patch can take many different configurations. However, the rectangular and circular patches are most popular because of ease of analysis and fabrication, and their attractive radiation characteristics, especially low cross-polarization radiation. In high performance aircraft, spacecraft, …
Published in Journal of VLSI Design Tools and Technology · Vol. 8, Issue 2, 2018 · pp. 1–8 Read article
-
An Assessment of Structural Safety of Cement Mortar Lined Irrigation Water Pipeline by Hydrostatic Test
Abstract: Structural safety of cement mortar-lined water pipeline is a matter of great concern primarily due to weld defects, fabrication deficiency and assessment of pressure shared by lining. The verification of structural design of such pipeline and assessment of safety is generally carried out by conducting prototype hydrostatic test. The present paper is based on one such type of study conducted by CWPRS, Pune, for Guthpha Lift Irrigation Scheme, Nizamabad, Andhra …
Published in Journal of Water Resource Engineering and Management · Vol. 1, Issue 1, 2014 · pp. 1–5 Read article
-
Experimental Aspects of Surface-Driven Capillary Flow in Microfluidics
Abstract: AbstractAt least one of the length, width or height must be less than one millimetre in any microchannel. The fluidic motion in any microchannel is called the microfluidic flow. Surface-driven capillary flow is also called the passive capillary flow in microfluidics. Polymers are common materials to fabricate the microfluidic devices. In this work, different aspects of surface-driven capillary flow are briefly explained. Surface-driven capillary flow has many bioengineering applications that …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 1, 2020 · pp. 15–19 Read article
-
Short Review on the Particle Image Velocimetry in Fluid Mechanics
Abstract: In this short review, the reports by few authors on particle image velocimetry are briefly described. The features of particle image velocimetry are briefly mentioned. Also, in this short review, an experimental demonstration on microfluidic flow is presented by Mukhopadhyay as author. A single microchannel bend is fabricated by microfabrication techniques. Dyed water is prepared as working liquid. The surface-driven capillary flow of dyed water is recorded and shown corresponding …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 3, 2020 · pp. 10–14 Read article
-
Surface-Driven Microfluidic Flow in Fluid Mechanics
Abstract: In this short report, a brief review on surface-driven microfluidic flow is provided. Also, the maskless lithography and indirect bonding technique are used to fabricate a single SU-8 based glass microfluidic device. Dyed ethylene glycol is prepared as working liquid to test the fabricated device. The surface-driven microfluidic flow of dyed ethylene glycol is recorded by a CMOS camera catching 25 frames per second with a corresponding time-scale resolution of …
Published in Recent Trends in Fluid Mechanics · Vol. 8, Issue 3, 2021 · pp. 1–5 Read article
-
Study and Analysis of Sewing Section in Garment Industry
Abstract: The production process in a garment industry is categorized into Fabric sourcing, Cutting and bundling, sewing, finishing and dispatching. Sewing section is the most important and critical process, the garment is completed and is suitable to be worn. Rolls of fabric which are cut and folded are sewn to specific three dimensional shapes in very complex ways require a high level of skill and experience. For maximum production in the …
Published in Trends in Machine design · Vol. 5, Issue 3, 2018 · pp. 27–33 Read article
-
Modern perspectives on composite armor
Abstract: This article is study of garment oriented schemes to learn composite armor. Bulletproof armor has been developed to protect humans from destructive weapon. Assess has been to develop low-cost, easy in fabricate originated easy wearable biocompatible bulletproof garment. Suggestive estimation has scriptive issued competence between variations in plate thickness and amount of energy absorbed by lamination of armor. Henceforth, observation has been 12mm thickness of composite plate lying to be …
Published in Trends in Machine design · Vol. 8, Issue 3, 2021 · pp. 14–20 Read article
-
Real-Life Demonstration on the Surface-Driven Capillary Flow in Microfluidic Devices
Abstract: AbstractIn this research paper, glass and PMMA are chosen as materials to fabricate the microfluidic devices due to the optical transparency of these materials. The microfluidic devices are fabricated by the maskless lithography (non-contact lithography), hot embossing lithography (contact lithography), indirect bonding technique, and direct bonding technique. The surface-driven capillary flow is recorded corresponding to each microfluidic device by a CMOS camera. The colour-images are compared with the gray-scale-images for …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 2, 2016 · pp. 8–17 Read article
-
Optical Recording of Flow Phenomena in Photoresist based Microfluidic Devices
Abstract: AbstractIn this experimental work, a set of three individual SU-8 based glass microfluidic devices are fabricated by maskless lithography and indirect bonding technique without having any microfluidic leakage. Dyed ethanol (10% ethanol, 90% red dye) is prepared and used as dyed working liquid. The microfluidic leakage is observed in other set of two leaky microfluidic devices due to improper indirect bonding technique. The effect of surface-to-volume ratio on surface-driven capillary …
Published in Trends in Opto-electro & Optical Communication · Vol. 10, Issue 1, 2020 · pp. 36–42 Read article
-
Performance Analysis of Ultra-Short Junctionless DGMOS Nanowire Transistors with High-k Gate Dielectric
Abstract: AbstractIn this report, we present a comparative analysis of ultrashort 3-D junctionless nanowire DGMOS transistors using different high-k gate dielectric by virtually fabricating the device in Visual TCAD. The ultrashort devices having channel length of 20 nm were simulated and performances like I-V characteristics, transconductance etc. were analysed. It was found that HfO2 has better steady state performances as gate dielectric owing to better control of the channel over the …
Published in Journal of Communication Engineering & Systems · Vol. 9, Issue 1, 2019 · pp. 35–42 Read article