Search
1948 articles for “and yielded a damage-estimation R² of 0.946” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Artificial Neural Network Based Prediction of Impact Loads and Thickness in CFRP and GFRP Composite Laminates
Abstract: Recent technological advancements, particularly the integration of neural networks, have facilitated a predictive approach to complex engineering problems, especially those involving composite materials with directional properties. The scarcity of literature on predicting impact damage using experimental and ultrasonic flaw detection data motivated this study. Experimental assessment of impact damage on carbon fiber/epoxy (CFRP) and glass fiber/epoxy (GFRP) composites was conducted using low-velocity drop weight impact testing. Damage assessment employed an …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 34–45 Read article
-
Development of a Machine Learning and Artificial Intelligence Based Model Aimed at Forecasting the Prognostic Impact of C-Reactive Protein in Myocarditis
Abstract: The specific role of inflammation markers in myocarditis remains uncertain. We investigated the diagnostic and prognostic significance of C-reactive protein (CRP) levels at the initial diagnosis among myocarditis patients. Our retrospective study enrolled patients clinically suspected (CS) or biopsy-proven (BP) with myocarditis, with available CRP data at diagnosis. We collected patient information, including clinical, laboratory, and imaging findings at diagnosis and follow-up visits. We utilized machine learning methods, specifically random …
Published in Research and Reviews: A Journal of Health Professions · Vol. 14, Issue 2, 2024 · pp. 12–24 Read article
-
A New Separation Technique for Method, Development and Validation of Aclidinium Bromide and Formoterol Fumarate in Its Pure and Pharmaceutical Dosage Form by Using Rp-HPLC
Abstract: A new simple, precise, selective and accurate, a new method of development and validation using Rp-HPLC for the estimation of Aclidinium bromide and Formoterol Fumarate in its pure and pharmaceutical dosage form. Chromatogram was run through DIKMA Spursil, C18 segment (4.6×150 mm, 5µ0). Mobile phases contain 0.1% OPA: Acetonitrile (30:70) with the use of the 0.1% OPA buffer, stream rate of 1 ml/min and measured in 280 nm. The run …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 15, Issue 3, 2024 · pp. 18–36 Read article
-
Preserving Papaya Pulp with Potassium Metabisulfite: A Study on Prolonging Shelf Life
Abstract: Papaya is a highly perishable fruit with a shelf life of only 3 to 6 days under tropical conditions, leading to significant postharvest losses. This study aimed to preserve papaya pulp for subsequent use in product development .Pulp was extracted from “Indian Red Lady Variety” of papaya and treated with potassium metabisulphite (KMS) at concentrations of 500, 1000 and 1500 ppm. The treated pulp was stored at room and refrigerated …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 13, Issue 2, 2024 · pp. 06–14 Read article
-
Eco-Friendly Tri-Layer Hybrid Composites: A Sustainable Approach to Polymer Matrix Materials
Abstract: In the current study, we explored the use of environmentally friendly natural fibers such as sisal, banana, and kevlar. These fibers were fabricated by hand lay-up technique, and their impact on tensile and dynamic properties was evaluated according to ASTM standards. The assessment was conducted under both dry and wet conditions, considering two different chemical dosage parameters for comparison. Additionally, the tri-layer fibers underwent two separate chemical treatments using 1% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 195–205 Read article
-
History and Applications of Kalman Filter: A Review
Abstract: The Kalman filter is a powerful algorithm that is used to estimate the dynamic system states with noisy measurements and uncertain behaviors. It is an optimal estimator that minimizes the average squared error between the estimated states and the true states, given the noisy data and a model of the system. The recursive algorithm is highly effective in tracking and predicting the state of complex systems over time. Kalman filters …
Published in International Journal of Electrical Power and Machine Systems · Vol. 2, Issue 1, 2024 · pp. 14–23 Read article
-
Synthesis and Study of Photoluminescence properties of Sm3+ activated 7TiO2 + 3Al2O3 + (60-x)B2 O3 +xY+ 5LiCO3 +25SrCO3 Borate Glass for SSL Applications
Abstract: Melt quenching was used to successfully create the raddish orange light-emitting Sm3+activated 7TiO2 + 3Al2O3+ (60-x) B2O3+xY+ 5LiCO3+25SrCO3 (X=0.001, 0.002, 0.005, 0.01 and 0.02, Y=Sm3+) borate glass. XRD examination confirmed the phase of the prepared Un-doped and Doped 7TiO2 + 3Al2O3+ (60-x) B2O3+xY+ 5LiCO3+25SrCO3 glass. Its PL characteristics under ultraviolet (UV) light (302-468 nm) were later studied. At 602 nm, the excitation was detected, and at 402 nm, the emission. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 55–60 Read article
-
Identification and Prioritization of Critical Erosion Prone and Water Potential Areas of Manandragarh Watershed Using HEC-HMS for Management
Abstract: This study was carried out at Indira Gandhi Krishi Vishwavidyalaya, Raipur (CG) on hydrological modelling and development of soil and water conservation plan for critical erosion prone and water potential sub-watersheds of Manendragarh watershed of upper Hasdeo subbasin in Chhattisgarh using Hydrological Engineering Centre-Hydrological Modelling System (HEC-HMS). The Hydrological Engineering Centre-Geo Hydrological Modelling System (HEC-Geo HMS) was utilized for developing the model setup, while the HEC-HMS model was employed to …
Published in Research & Reviews : Journal of Ecology · Vol. 14, Issue 1, 2025 · pp. 26–44 Read article
-
The Prognostic Efficacy of Inflammatory Indicators in Determining the Cause of Multiple Sclerosis Exacerbation
Abstract: Multiple sclerosis (MS) is the most prevalent immune-mediated inflammatory disease affecting the central nervous system, presenting with diverse clinical symptoms and manifestations. This study investigates the diagnostic potential of the monocyte-to-lymphocyte ratio (MLR), red cell distribution width-to-lymphocyte ratio (RLR), and systemic immune-inflammation index (SII) in detecting MS attacks among relapsing-remitting MS (RRMS) patients seeking care in the emergency department (ED). The research focused on RRMS patients who presented to the …
Published in Research and Reviews : A Journal of Immunology · Vol. 15, Issue 1, 2025 · pp. 1–8 Read article
-
Wettability and Physiothermal Analysis of Silver-Reinforced Eggshell-Derived Hydroxyapatite Based Biocomposite
Abstract: Hydroxyapatite (HAp), a biocompatible ceramic material, has garnered significant interest in medical applications due to its natural bone type replica. The current study investigates the physical, wettability, and thermal properties of a novel HAp derived from eggshell waste and reinforced with silver nanoparticles at 0.0, 0.1, 0.2 and 0.5 weight % concentration using chemical precipitation method and termed as HAP0.0Ag, HAP0.1Ag, HAP0.2Ag and HAP0.5Ag respectively. As observed, the Fourier transform …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 300–314 Read article
-
Analysing the Deep Hole Drilling Characteristics of AISI 316 Alloy Using Peck Drilling Approach
Abstract: This study aims at the deep hole drilling characteristics of AISI 316 alloy utilizing the Peck drilling procedure. It is well-established that hole is the most prevalent machining process, requiring precise techniques to achieve optimal cutting conditions. AISI 316 has high corrosion resistance and mechanical features. It is widely utilized in the aerospace, vehicle, aircraft, and other industries. Due to its high modulus of elasticity, reactivity at high cutting speeds, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 14–28 Read article
-
Experimental Analysis of Wear Characteristics in Natural Fibre Composite Materials
Abstract: In mechanical systems, energy loss and material degradation due to attrition are frequently the consequences of sliding contacts, which frequently lead to premature system failure. In this study, at 50°C, 80°C, and 110°C, the hardness was tested; the results showed that the values were 350.7, 422.5, and 455.5 HV, respectively. After conducting a high-temperature wear test, the mass loss of the as-deposited composite coatings was assessed by an electrochemical approach …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 444–450 Read article
-
Influence of ZycoTherm Dosage on Polymer Modified Bitumen and Marshall Performance of Hydrated Lime Incorporated Warm Mix Bituminous Concrete
Abstract: This study examines the effect of ZycoTherm on PMB 76-10 binder characteristics and the performance of PMB-based Bituminous Concrete (BC) Grade-II prepared at reduced mixing temperatures, with and without hydrated lime. PMB 76-10 was modified with ZycoTherm at dosages of 0.05%, 0.10%, 0.15%, and 0.20% by weight of binder and evaluated using conventional and residue-based tests. Increasing ZycoTherm dosage decreased penetration, while softening point, flash point, and elastic recovery increased, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 256–267 Read article
-
Multi-Criteria Assessment of Renewable Energy Technologies for Solar Buildings Using Waspas Method
Abstract: This research comprehensively evaluates renewable energy alternatives for solar buildings using the WASPAS multi-criteria decision-making framework. The analysis covers six distinct energy technologies: geothermal heat pumps, wind turbines, biomass heating systems, micro-hydro installations, fuel cells and building-integrated energy efficiency systems. These options are assessed against four key criteria: energy efficiency, economic viability, environmental sustainability and technical feasibility. The WASPAS methodology combines both summative and multiplicative techniques to produce reliable rankings. …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 17, Issue 2, 2026 Read article
-
Generative Design of Bioactive Orthopedic Composites for Fracture Repair Using an Integrated Conditional GAN–Transformer Framework: A Multi-Objective Approach
Abstract: Orthopedic composite implants for fracture repair must simultaneously satisfy conflicting mechanical and biological demands: high fracture toughness, sufficient compressive stiffness, and bioactive surface chemistry enabling osteoblast adhesion and mineralization. Existing design approaches rely on trial-and-error experimentation, yielding sub-optimal trade-offs between these objectives. This paper presents an integrated conditional Generative Adversarial Network–Transformer (cGAN-T) framework for fully computational, multi-objective generative design of hydroxyapatite (HA)-reinforced polymer composite microstructures targeting Orthopedic fracture repair. A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 21–35 Read article
-
Mapping the Vulnerabilities of Coastline Cities and Communities in Africa to Adapt to Climate Change: A Study of Lagos-Nigeria
Abstract: The Lagos coastline is active in nature and is located about less than six feet above sea level and houses about half of 15 million people in Lagos state, and is vulnerable to changes in coastline due to flooding and erosion. Climate change has aggravated this; sea-level rise will increase the risk of storm surge flooding, and coastal erosion threatening coastal cities. The annual rainfall along the coastline of Lagos …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 11, Issue 1, 2020 · pp. 44–57 Read article
-
A Study on adsorption of Phenol red dye and Chromium (VI) metal ion using activated carbon derived from Lantana camara with the activation of potassium hydroxide.
Abstract: Commercial activated carbons are expensive to produce and regenerate, it is essential to produce activatedcarbon using low-cost raw materials and methods. This study's goal is to demonstrate the possible adsorptionproperties of activated carbon made from Lantana camara for the removal of dyes and metal ions fromaqueous solutions. In this study, activated carbon from Lantana camara stems was obtained through a one-step chemical activation procedure using potassium hydroxide KOH. The surface …
Published in Journal of Nuclear Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 1–10 Read article
-
Enhanced Thermal Conductivity of Polyaniline Nanofluids Synthesized using CuCl2 as Catalyst
Abstract: AbstractThe development of nanofluids for enhancing the heat transfer properties over the conventional fluids is mainly hindered by a vital issue of dispersion stability and hence is being explored in the present work. In the present study, Copper Polyaniline nanoparticle was synthesized by the oxidative polymerization method using CuCl2 as a catalyst. The characterization of Copper Polyaniline was performed. The sizes of nanoparticles were found to be within 7.24 nm …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 20–40 Read article
-
Optical Filters From Silicon Dioxide Doped Dyes
Abstract: In this work silicon dioxide powder of high purity 99.5% imported from china was used to fabricate optical filters by doping the SiO2 with green and red phenol dyes with different concentrations of 0.25,0.5,0.75 and 1 in terms of mg, four samples of red SiO2 doped phenol filters and four samples of green SiO2 doped phenol filters were produced by pressing the mixture of silicon dioxide powder doped with the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 1, 2020 · pp. 39–48 Read article
-
Screening of Bone Mineral Density, Serum Calcium and Vitamin D Level in Hyperthyroid Females of North India
Abstract: Introduction: Osteoporosis is a disease which plays a role in causing fracture especially in females. Hormonal dysfunction may be one of the possible causes of osteoporosis. Hyperthyroidism has been known to increase the risk of fracture especially in women both pre- and postmenopausal. The relation between hyperthyroidism and bone mineral density (BMD) is still unclear. Therefore, the present study was carried out to assess the effects of hyperthyroidism on long …
Published in Research and Reviews: A Journal of Health Professions · Vol. 8, Issue 2, 2018 · pp. 49–56 Read article