Search
940 articles for “fabric”
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
IoT-Connected Transparent Conductive Polymer–Silver Nano-Wire Electrodes for Real-Time Performance Monitoring of Flexible Solar Panels
Abstract: Flexible photovoltaic technologies have emerged as promising energy harvesting solutions for wearable electronics, portable power systems, and Internet of Things (IoT)-enabled smart devices. However, the limited mechanical durability of conventional transparent conductive electrodes and the lack of integrated real-time monitoring restrict their long-term reliability. This study presents an IoT-connected transparent conductive polymer–silver nanowire (PEDOT:PSS–AgNW) hybrid electrode for flexible solar panels, combining high optoelectronic performance with continuous wireless performance monitoring. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 1–18 Read article
-
Development and Analysis of General-Purpose Drone
Abstract: In recent years, drones have become indispensable tools across various industries, thanks to their versatility and wide-ranging applications. The fabrication of drones is a complex process that integrates multiple engineering disciplines, including mechanical design, electrical systems, aerodynamics, and software development. The meticulous design of the drone's frame, taking into account factors such as weight, durability, and aerodynamic efficiency, marks the commencement of the fabrication process. The paper presented a comprehensive …
Published in Journal of Aerospace Engineering & Technology Read article
-
Polymer Nanocomposites at the Nanoscale: A Comprehensive Review with Reference to Indian Regulations
Abstract: By combining nanoscale reinforcements with polymer matrices, polymer nanocomposites have become one of the most promising classes of advanced materials with superior mechanical, thermal, electrical, barrier and multifunctional properties. This extensive review critically analyses the scientific advances made in polymer nanocomposites between 2000 and 2026, with focus on recent advances in polymer nanocomposite development, processing techniques, structure–property relationships and new applications. The review covers the impact of the nanofillers which …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 115–129 Read article
-
Surface-Driven Capillary Flow of Dyed Aqueous Ethanol in Sudden Expansion Microchannels
Abstract: AbstractIn this work, total three individual SU-8 based glass microfluidic devices are fabricated by maskless lithography and clamping. Dyed aqueous ethanol is selected as working liquid. Each surface-driven capillary flow is recorded by a CMOS camera. The filling time of surface-driven capillary flow is considered as the flow parameter to determine the flow speed. This work will be useful to fabricate the microfluidic devices for bioengineering applications.Keywords: Sudden expansion, maskless …
Published in Journal of Thermal Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 22–25 Read article
-
Design And Optimization Of Performance Parameters Of Indirect Solar Drying System
Abstract: The objective of the work being presented is to design and develop an indirect solar dryer in the renewable energy laboratory of Mechanical Engineering Department, I.I.T BHU Varanasi and evaluate its performance under the climatic conditions of Varanasi, U.P India. The main components of indirect solar dryer are flat plate solar collector, drying chamber, blower and other accessories of the drying system. Originally built Shukla-Sharma dryer for drying aonla was …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 1, 2021 · pp. 1–22 Read article
-
INVESTIGATION OF MICROSTRIP BANDPASS FILTER FOR S-BAND APPLICATION
Abstract: Abstract— Microstrip bandpass filter is presented in this paper for S-band application. The filter employs the microstrip line with port matching topology and plane ground to operate in S-band frequency range. CST Microwave Studio simulator is used for simulation and Rohde & Schwarz Vector Network Analyzer is used for measurement. Filter has size of 120 mm x20 mm and fabricated using low cost FR-4 substrate of 1.6 mm thickness and …
Published in Current Trends in Signal Processing · Vol. 8, Issue 1, 2018 · pp. 28–32 Read article
-
Multiband Antenna Designing using Proximity Coupled Technique
Abstract: AbstractIn this paper, author proposed a multiband antenna a circular patch and proximity coupled feeding technique. This feeding technique not only showed good result, it made the antenna multiband as well. Author fabricated this antenna to compare it with simulation result and found that fabrication results are also promising. This simulated antenna is a miniaturized four-band antenna which has the capability to operate at four distinguished frequencies. This proposed design …
Published in Current Trends in Signal Processing · Vol. 8, Issue 3, 2018 · pp. 13–17 Read article
-
Development and Evaluation of Physical and Mechanical Properties on Talc Filled Sisal/Polyester Composites
Abstract: In recent years, research focusing on the use of natural fiber-reinforced composites has been increased and has opened up further industrial possibilities due to advantages of low density, low cost, biodegradability, abundance and renewability proffered by natural fibers. In this research, randomly oriented sisal fiber and talc filler were used to reinforce polyester matrix to produce composites of 3 mm thickness. The composites were fabricated by hand laying technique. Composite …
Published in Emerging Trends in Chemical Engineering · Vol. 5, Issue 2, 2018 · pp. 27–35 Read article
-
Recording of Leakage-free Surface-Driven Capillary Flow of Dyed Water in the Dual Sudden Contraction Microchannels
Abstract: Dual sudden contractionpolymethylmethacrylate (PMMA) microchannels are fabricated by the maskless lithography, hot embossing lithography, direct bonding technique, and atmospheric pressure air dielectric barrier discharge (DBD) plasma processing. The surface-driven capillary flow of dyed water is faster on the processed PMMA surface than the pristine PMMA surface. The surface-driven capillary flow of dyed water is slower in the wider portion and faster in the narrower portion of any dual sudden contraction …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 2, 2017 · pp. 40–44 Read article
-
Experimental Study on the Surface-Driven Capillary Flow of Aqueous Microparticle Suspensions in the Straight PMMA Microchannels
Abstract: The straight polymethylmethacrylate (PMMA) microchannels are fabricated by the maskless lithography, hot embossing lithography and direct bonding technique. Total 120 individual PMMA microfluidic devices are fabricated by author’s own hands-on completely. Total 120 individual audio video interleave files as ‘FileName.avi’ are recorded and analyzed by author. The surface-driven capillary flow of different aqueous microparticle suspensions are recorded in these straight PMMA microchannels. The effects of channel aspect ratio, effective viscosity …
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 3, 2016 · pp. 26–30 Read article
-
Short Report on the Microfluidic Flow of Dyed Ethylene Glycol
Abstract: In this experimental work, a single polymethylmethacrylate (PMMA) microfluidic device as gradual expansion microchannel is fabricated by maskless lithography, hot embossing lithography and direct bonding technique. Dyed ethylene glycol is prepared and used as working liquid in this work. A CMOS camera is used to capture the passive microfluidic flow of dyed ethylene glycol in the fabricated microfluidic device. Nano fluidics is the nano-scale fluid mechanics in nanotechnology. In future, …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 2, 2021 · pp. 10–13 Read article
-
Prototype of Design, Analysis and Optimization of Front Hub Upright Assembly of ATV (All-Terrain Vehicle) for Baja SAE India Competition
Abstract: When all-terrain vehicle came in dynamic condition steering and suspension geometry, it affected the vehicle stability. This stability limits the speed and comfort of the vehicle. Stability is more required in all-terrain vehicles because they have to wear more dynamic force; if vehicle will be unstable then failure will occur; it also decreases the ergonomics and comfort of the driver, so it is mandatory that vehicle should have proper geometry …
Published in Journal of Automobile Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 15–20 Read article
-
Experimental Demonstration on the Leakage-Free Surface-Driven Capillary Flow of Red Dye
Abstract: In this work, two individual SU-8 based glass microfluidic devices are fabricated by the maskless lithography and indirect bonding technique. Commercially available red-colored food dye is used as the working liquid. Microfluidic leakage is observed between the glass lid and SU-8 based microchannel substrate due to the improper indirect bonding technique. Leakage-free surface-driven capillary flow is observed due to the proper indirect bonding technique. CMOS camera is used to capture …
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 3, 2018 · pp. 8–11 Read article
-
Preparation of High Density Polyethylene (HDPE) blended Lignocellulosic Composite
Abstract: AbstractHigh density polyethylene (HDPE) blended lignocellulosic bagasse composite are structural materials made from renewable resources. These materials are being researched and developed to replace less eco-friendly structural and non-structural materials used in the construction industry. The lignocellulosic-composites studied have the potential to be used for scaffolding, framework, flooring, walls and for many other applications within buildings, as well as for temporary construction. In this study, high density polyethylene (HDPE) blended …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 1, 2019 · pp. 14–20 Read article
-
SU-8 Polymer as an Optical Waveguide for Integrated Optics
Abstract: Abstract: Optical integrated circuits analogous to electronic integration have many advantages over the latter technology. As information carriers are photons (bosons) in optical circuits rather than electrons (fermions), which maximize the speed as well as due to minimum mutual interaction between photons, losses are reduced whereas the band-width increases. Silicon is most dominant material in fabrication of Electronic Integrated Circits (EICs), Photonic Integrated Circuits (PICs) exploits the suitable optical properties …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 1, 2019 · pp. 20–26 Read article
-
Compact Pseudo-interdigital Bandpass Filter for L-Frequency Band
Abstract: In this paper, a different kind of microstrip bandpass filter is presented which is small in size and easy in fabrication. This microstrip filter is pseudo-interdigital bandpass filter at the operating mid-band frequency of 1.75 Ghz, which is in L-frequency band (1–2 Ghz). Unlike the conventional interdigital bandpass filters, in which we use short circuit connection by a via hole, this filter is simple and compact and its design is …
Published in Journal of Electronic Design Technology · Vol. 4, Issue 1, 2013 · pp. 15–18 Read article
-
DEM Simulation of Macro and Micro-Scale Behavior of Granular Materials during Loading and Unloading
Abstract: The present paper aims at comparing the simulated stress-strain behavior of granular materials quantitatively with the experiment and exploring the evolution of the micro-scale behaviors during loading and unloading using the discrete element method (DEM). A numerical sample consisting of 9826 randomly generated spheres similar to the experiment was prepared. The numerically prepared isotropic sample was subjected to loading and unloading under strain controlled condition. It is noticed that the …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 1, 2022 · pp. 26–38 Read article