Search
649 articles for “characteristic analysis”
-
Pore Distributions in Porous Anodic Aluminum Oxide (PAAO) Surfaces of Pure and Commercial Aluminum Substrates
Abstract: Porous anodic aluminum oxide (PAAO) surfaces were developed on pure aluminum (PA) and commercial aluminum (CA) substrates by anodization as a function of voltage in phosphoric acid bath at 278 K and were analyzed by scanning electron microscopy. The interpore distances were plotted in the form of frequency histograms to examine pore-ordering characteristics. Self-ordered porous structures have been obtained at 200 and 160 V for PA and CA substrates respectively …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 143–153 Read article
-
Is tibial expert nailing biomechanically more stable compared to intramedullary nailing for tibial fractures?
Abstract: Background: Fractures of the tibia and fibula are relatively common and have been recognized as serious and debilitating injuries, because its surface is subcutaneous throughout most of its length, open fractures are more common in the tibia than in any other major long bones. To avoid complications of operative treatment in association with these characteristics of the tibia, intramedullary nailing has been widely introduced for the tibial diaphyseal fractures, and …
Published in Research and Reviews: A Journal of Medicine · Vol. 13, Issue 2, 2023 · pp. 27–50 Read article
-
Contact Stress Analysis of Needle Roller Bearing Used in Synchromesh Gear Box
Abstract: The optimum selection of a bearing generally depends on particular application such as to transfer loads between the rotating and stationary members, and to permit free rotation. From among the wide range of bearings available in the market today has various considerations, such as the load-carrying capacity, the life of the bearing, and the working rotational speed need to be considered before a suitable bearing can be selected. Here for …
Published in Trends in Machine design · Vol. 5, Issue 1, 2018 · pp. 5–20 Read article
-
Investigation on the Characteristics of Oil from Different Species of Cocos Nucifera
Abstract: The study evaluates the characteristies of the extracted oil from different species of coconut (Cocos Nucifera) obtained within the Niger Delta region, Nigeria. The coconut species consists of West Coast Tall (Species A), East Coast Tall (Species B), Maypan (Species C), Tiptur (Species D), Orange dwarf (Species E), Green Dwarf (Species F), Malayan yellow (Species G), Fiji Dwarf (Species H), Macapuna (Species I) and Kings (Species J). The results from …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 3, 2021 · pp. 17–33 Read article
-
Performance Characteristics of Magnetorheological Elastomer Vibration Isolator
Abstract: Smart materials have ability to alter significantly its properties under external stimuli, such as stress, temperature, moisture, electric or magnetic fields. In today’s engineering era, various smart materials are being used to have controlled behavior in various applications such as automotive brakes, clutches, etc. Magneto Rheological Elastomer (MRE) is one of them, uprising with very huge potential. In this present work, preparation of MRE has been presented. Various MRE mold, …
Published in Journal of Automobile Engineering and Applications · Vol. 1, Issue 2, 2014 · pp. 1–4 Read article
-
A molecular docking study and in silico analysis: targeting the marburg virus protein vp35 using active phytocompounds from alchemilla vulgaris
Abstract: Objective: The Marburg Virus Disease (MVD) is an infectious viral disease originating from African Fruit Bats (Rousettus aegyptiacus) that has become the root cause of a fatal hemorrhaging viral fever. As per reports from the WHO, MVD has claimed the lives of millions of people worldwide, with a disease fatality rate ranging from 24% in initial outbreaks to 88% in recent times owing to a difference in viral strains and …
Published in Research and Reviews : Journal of Computational Biology · Vol. 12, Issue 2, 2023 Read article
-
Comparative Analysis of Dip and Spray Techniques with Ethanol, Polyvinyl Alcohol, and Acetone Hydrophobic Glass Slides with Al2O3 Coating
Abstract: The hydrophobic effects of Al₂O₃ coatings on glass slides are investigated in this work by comparing dip and spray procedures using three distinct solvents: acetone, polyvinyl alcohol (PVA), and ethanol. Using both dip and spray techniques, the experimental design systematically applies Al₂O₃ coatings on glass slides. Then, the effect of the chosen solvents on hydrophobicity is investigated. Delineating the complex interaction between coating processes and solvent options requires careful analysis …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 45–51 Read article
-
Multicriteria Decision Making using SR-Fuzzy Sets
Abstract: In this study, we introduce and explore square-root fuzzy sets (SR-Fuzzy sets), a novel extension within the realm of fuzzy set theory. We begin by establishing a comparative analysis between SR-Fuzzy sets and two well-known fuzzy set models: Intuitionistic Fuzzy Sets (IFS) and Pythagorean Fuzzy Sets (PFS). This comparison highlights the unique characteristics and mathematical structure of SR-Fuzzy sets. A particular focus is placed on the complement operator, which plays …
Published in Recent Trends in Mathematics · Vol. 1, Issue 2, 2024 · pp. 12–20 Read article
-
Analysis of Security in Cloud Computing
Abstract: These days, cloud computing is expanding quickly in the IT sector, offering a fresh approach to managing various information systems. The rapid pace of technological advancement highlights the importance of embracing and leveraging its advantages. Organizations transitioning to cloud-based information archiving demonstrate several key characteristics. These include enhanced IT infrastructure, the ability to manage remote access from any location in the world with a stable Internet connection, and the cost …
Published in Recent Trends in Parallel Computing · Vol. 11, Issue 1, 2024 · pp. 35–40 Read article
-
The Effect of the Cyclic Steam Stimulation on the Thermal Cement Bond: Cased Hole Wire Logging Evaluation (Segmented versus Original) Tools
Abstract: When focusing on the oil thermal well life integrity, One of the current trends is to optimize the use of the innovative solutions in order to improve the quality of the cement bonding (i.e. cement to pipe bond and formation). This trend is in a trail application in Fula North East thermal wells in Sudanese oilfields. The objective of this paper is to discuss how the Cyclic Steam Stimulation (CSS) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 50–60 Read article
-
Drilling Parameters Optimization in LM6/B4C/Fly ash Hybrid Composites by Taguchi Technique
Abstract: Aluminium matrix composites (AMCs) are challenging to machine due to its abrasive characteristics. Because of the broad adoption of MMCs, it is vital to create sufficient equipment to facilitate efficient manufacturing. The current study utilizes signal-to-noise ratio (S/N) analysis to determine the ideal machining parameters for drilling AMC’s. The goal with this study is to investigate the effect of feed rate (FR), drill type (D), speed (SS), reinforcing material R …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 890–897 Read article
-
Control System for Off-Grid Multiple Hybrid Renewables
Abstract: This article focuses on designing a renewable energy control system for a household self-consumption network, combining solar and hydroelectric energy to meet the energy demand of a standard home. We conducted an exhaustive analysis of each energy source, evaluating parameters such as solar radiation, optimal tilt of photovoltaic panels, and conversion system efficiency. Equipment for this system is selected based on the characteristics obtained in the study. Hydroelectric energy is …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 3, 2024 · pp. 20–34 Read article
-
Performance and Analysis of 6T, 8T & 10T SRAM Cell in 28nm Technology
Abstract: Technology scaling into deep sub-micron regimes has significantly increased the design challenges of Static Random Access Memory (SRAM), particularly at the 28 nm technology node. As transistor dimensions shrink, SRAM cells become more vulnerable to stability degradation, leakage current, process variations, and reduced noise margins, which adversely affect overall memory performance and reliability. The conventional 6T SRAM cell remains widely used due to its compact structure and high storage density; …
Published in Journal of VLSI Design Tools and Technology · Vol. 16, Issue 2, 2026 · pp. 12–18 Read article
-
Artificial Intelligence and Constitutive Modeling Equations for Predictive Design of High-Performance Polymer Composites
Abstract: Growing polymer composite applications demand accurate mechanical prediction, yet complex interactions and conventional constitutive models limit predictive capability and require extensive calibration. To report these challenges, this research recommends a combined Artificial Intelligence (AI) and constitutive modeling approach based on an Enhanced Tasmanian Devil Optimizer-tuned Residual Neural Network with Multilayer Perceptron (ETDO-ResNet-MLP) for the predictive design of high-performance polymer composites. The study uses a publicly available Polymer Composite Property Dataset …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
A GIS and MCDA Framework for Land Suitability Analysis in Sustainable Agriculture
Abstract: This study examines land suitability for sustainable agriculture by integrating Geographic Information Systems (GIS) and Multi-Criteria Decision Analysis (MCDA) as tools to optimize agricultural planning. Sustainable agricultural practices are increasingly critical to meet global food demands without depleting essential land resources. This research focuses on assessing specific parameters that determine the agricultural viability of land, including soil characteristics, topography, climatic conditions, and water availability. These criteria are integral to understanding …
Published in International Journal of Land · Vol. 1, Issue 2, 2024 · pp. 30–34 Read article
-
Nanocrystalline Silver: Synthesis by High-Energy Ball Milling, X-ray Debye Temperature Analysis, and Diverse Applications
Abstract: This research paper presents a comprehensive investigation into transforming micro-sized silver (Ag) powder into nanostructured Ag powder by applying high-energy ball milling. The ball milling process was executed over a total duration of 20 hours, with periodic sampling every 4 hours to monitor the evolving characteristics of the material. The particle size, lattice strain, Debye-Waller factor, and root mean square amplitudes of vibration were calculated by using X-ray powder diffraction …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 140–148 Read article
-
Enhancing Bituminous Mixes with Recycled Polyethylene: Performance Analysis Using Marshall Stability Test
Abstract: This study investigates the impact of incorporating recycled low-density polyethylene (LDPE) and high-density polyethylene (HDPE) in bituminous mixes for potential use in flexible pavement construction. Utilizing a Marshall Stability Test, various proportions of LDPE and HDPE were analyzed to determine optimal stability and flow characteristics. The test maintained a fixed Zycotherm content at 1.5% and varied LDPE content from 2% to 5% by weight, while HDPE content was also tested …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 1–5 Read article
-
Comparative Study on Stabilization of Expansive Soil using Cement Kiln Dust and Ceramic Dust
Abstract: In India, expansive soils cover about 20% of total land area, these soils increase in volume (swell) during winter season and decrease in volume (shrink) during summer season. Due to this contradiction behaviour many civil engineering structures constructed on expansive soils get damaged severely, out of which pavement is the most because they are lightweight and extend over large areas. Stabilization of Expansive soil is of most importance, since to …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 3, 2014 · pp. 1–7 Read article
-
In Silico Docking Analysis to Identify Therapeutic Benzoic Acid Derivatives for Acute Myeloid Leukaemia
Abstract: Background: The study is anchored to initiate subjugation against modern cancer therapy for Acute Myeloid Leukaemia (AML) which involves natural therapeutics as an alternative therapy that would degrade the prospect of adverse side effects along with anti-cancer properties. Objectives: Collate the various characteristics of Giltertinib with natural benzoic acid derivative phytochemicals for a disquisition regarding their similarities and differences in the context of providing adverse side effects. Methods: ADME toxicity …
Published in International Journal of Cell Biology and Cellular Functions · Vol. 1, Issue 2, 2023 · pp. 50–63 Read article
-
Experimental Investigation and Analysis of Dry EDM process for Material Removal Rate and Tool Wear Rate
Abstract: The importance of Electrical Discharge Machining process is increasing, especially for the machining of electric conductive ceramic materials. EDM is particularly ideal due of its thermal operating principle, which allows for almost force-free machining. The effect of air on the machining characteristics of the dry electrical discharge machining (EDM) process is investigated in this study. Researchers regard dry electrical discharge machining to be an environmentally benign machining process, and many …
Published in Journal of Thermal Engineering and Applications · Vol. 9, Issue 1, 2022 · pp. 36–44 Read article