Search
602 articles for “experimental evaluation”
-
Driver Drowsiness Detection using Face Monitoring and Pressure Measurement
Abstract: Fatigue driving is the driver, after long periods of continuous driving, experiences mental and physical functional disorder. The international statistics shows that it is one of the major causes of accidents in the world. Detecting the drowsiness of the driver can issue timely warning that could help in preventing many accidents. In this research a system is designed to detect the drowsiness of a driver through face monitoring techniques and …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 5, Issue 3, 2017 · pp. 12–18 Read article
-
Effect of Participatory Eye Care by Amelioration in Reducing Digital Eye Strain Among Computer Users in GNSU
Abstract: The prevalence of ocular complaints has grown along with the use of electronic devices in the twenty-first century of digital communication. Regular practice of eye exercise like integrated eye-neck exercises are found to be useful in relieving the eye discomfort and also improving the visual acuity. This study is to assess the effect of participatory eye care by amelioration in reducing digital eye strain among computer users in Gopal Narayan …
Published in Journal of Nursing Science & Practice · Vol. 13, Issue 1, 2023 · pp. 39–57 Read article
-
Study the Effect of Applied Gate Voltage on Threshold Potential and Carrier Transport Behavior of Three-Terminal Novel Prototype Device having Configuration P-type Si/SiO2/CuFeS2/Al
Abstract: This study presents a trial approach for the fabrication and characterization of a novel p-Si/SiO₂/CuFeS₂/Al field-dependent three-terminal electronic device designed to investigate charge transport behavior across multiple semiconductor junctions under externally applied bias voltages. The proposed prototype incorporates CuFeS₂ (chalcopyrite) as the active semiconductor layer, marking its first reported application in a field-induced electronic device architecture. The device was fabricated using a layered heterostructure consisting of p-type silicon, a silicon …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 2, 2026 · pp. 1–7 Read article
-
Exploring Challenges in Clinical Learning and the Impact of Structured Teaching on Infection Control Knowledge and Attitudes Among Nursing Students
Abstract: Living a healthy lifestyle is essential for preventing chronic diseases and maintaining physical, psychological, and social well-being. The present study, titled “Exploring Challenges in Clinical Learning and the Impact of Structured Teaching on Infection Control Knowledge and Attitudes among Nursing Students” aimed to address key challenges faced by nursing students and evaluate the impact of a structured teaching program. The study employed a quantitative research approach using a pre-experimental design …
Published in Research and Reviews : A Journal of Immunology · Vol. 15, Issue 1, 2025 · pp. 42–47 Read article
-
Effect of 3D Printing Process Parameters on the Tensile Strength of Polylactic Acid (PLA)
Abstract: This study employs the Taguchi approach to systematically analyze and optimize critical Fused Deposition Modeling (FDM) parameters, focusing on their effect on the tensile strength of 3D-printed Polylactic Acid (PLA) components. The study explores three levels of layer thickness (0.15 mm, 0.25 mm, and 0.3 mm), infill densities (25%, 50%, and 75%), and nozzle temperatures (200°C, 205°C, and 210°C) across three infill patterns: Triangular, Gyroid, and Zig-zag. A total of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 128–140 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Interpretable Skin Cancer Detection via Optimized CNN Models for Smart Healthcare Solutions
Abstract: Skin cancer is a common and potentially life-threatening condition, highlighting the importance of reliable and efficient diagnostic techniques. Recently, convolutional neural networks (CNNs) have demonstrated significant potential in automating the classification of skin cancer using thermoscopic images. Despite these advancements, the lack of interpretability in these models poses a barrier to their widespread use in clinical settings. In this study, we propose an interpretable CNN architecture optimized for skin cancer …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 12, Issue 1, 2025 · pp. 41–45 Read article
-
Experimental Study on Corrosion of Steel in Coarse Aggregate Medium
Abstract: AbstractThere are many practical situations were steel exposed to coarse aggregate. Deterioration of steel in such case it depends upon the nature of coarse aggregate, especially the types and the concentration of ions present in the moisture within the coarse aggregate since coarse aggregate vary in nature it is necessary to understand the nature of corrosion of steel in each samples of coarse aggregate. This aspect was taken for the …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 9, Issue 2, 2018 · pp. 69–76 Read article
-
Polymeric Coating Applied for Corrosion Protection of Mild Steel in Corrosive Medium
Abstract: Mild steel is coated with a polymer layer of polybutadiene for protection. However, this coating does not effectively safeguard the metal in environments containing moisture, sulphur dioxide, or chloride. These pollutants interact with the polybutadiene-coated surface, creating a highly corrosive atmosphere. Moisture condenses on the coated metal surface and absorbs sulphur dioxide, forming sulphuric acid. This acid initiates both chemical and electrochemical reactions with the polymer-coated metal, accelerating the corrosion …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 49–53 Read article
-
A Lightweight Cost-Sensitive Explainable Ensemble Framework for Early Heart Disease Risk Prediction
Abstract: Cardiovascular disease is still one of the leading causes of death, and hence, the early prediction of risk is a very important task in preventive medicine. Although recent studies have shown encouraging results in the application of machine learning algorithms to the prediction of heart disease, it has been noticed that most of the algorithms are more concerned with accuracy-driven optimization than the concerns of safety and false negatives. In …
Published in International Journal of Bioinformatics and Computational Biology · Vol. 4, Issue 2, 2026 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Technology-Enhanced Learning (TEL) on Breastfeeding among Primigravida Mothers
Abstract: The objective of the study was to evaluate the effectiveness of Technology-Enhanced Learning (TEL) on knowledge of primigravida mothers regarding breastfeeding. Experimental study was conducted on sixty primigravida mothers; divided into experimental and control group. The data was collected by structured knowledge questionnaire (SKQ). There was statistically significant difference (p<0.05) between the two groups in terms of knowledge after administration of TEL. Thus, it can be inferred that TEL regarding …
Published in Research and Reviews: A Journal of Medicine · Vol. 5, Issue 2, 2015 · pp. 19–23 Read article
-
Performance Evaluation of Single Phase Cascaded Nine Level Inverter using Photovoltaic (PV) SystemPerformance Evaluation of Single Phase Cascaded Nine Level Inverter using Photovoltaic (PV) System
Abstract: Multilevel inverters are considered at present as the state of the art power conversion systems for high power and power quality demanding applications. This paper’s objective is to propose a modified cascaded nine-level inverter topology for a virtually sinusoidal output voltage, less number of power switches, results in decreased complexity and reduced total harmonic distortion (THD). The structure is simple and easy to be extended to higher level but also …
Published in Trends in Electrical Engineering · Vol. 8, Issue 1, 2018 · pp. 30–47 Read article
-
Experimental Investigation and Optimization of Machining Parameters for Al6351 Alloy Using a Modified Taguchi Approach
Abstract: Machining processes encompass both conventional and non-conventional techniques and optimizing machining parameters is crucial for achieving high-quality outcomes. However, simplifying these processes remains a significant challenge. This study focuses on determining the optimal machining parameters—cutting speed, feed rate, and depth-of-cut to enhance performance characteristics in Al6351 alloy plates. The parameters evaluated include surface roughness (Ra), material removal rate (MRR), resultant forces (RF), and temperature at the tool- workpiece interface (Temp). …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1463–1481 Read article
-
A Study to Assess the Effectiveness of Knowledge and Practice Regarding Peritoneal Dialysis Among Patients with End-Stage Renal Disease at Selected Nephrourology Departments
Abstract: End-stage renal disease (ESRD) is a chronic and irreversible disorder in which kidney function declines permanently, making renal replacement therapy essential for survival. Among the available treatment options, peritoneal dialysis (PD) is considered a useful home-based therapy. Nevertheless, the effectiveness of PD largely depends on patients’ understanding of the procedure and their ability to perform it accurately. This study was conducted to evaluate the impact of a structured teaching program …
Published in International Journal of Emergency and Trauma Nursing and Practices · Vol. 4, Issue 1, 2026 · pp. 6–11 Read article
-
A Study on Stabilization of Expansive Soil with Ground Granulated Blast Furnace Slag and Sodium Silicate
Abstract: Utilization of industrial waste materials in the improvement of soils is a cost efficient and environmental friendly method. Stabilization of the expansive soil is studied by using Ground Granulated Blast Furnace Slag (GGBS) and sodium silicate. This paper includes the evaluation of soil properties like compaction, unconfined compressive strength test and California Bearing Ratio (CBR) test. Detailed experimental study has been undertaken to investigate the characteristics and behavior of expansive …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 2, 2017 · pp. 9–16 Read article
-
Effectiveness of Hot Fomentation on Leg Discomfort among Chronic Kidney Disease Patients Admitted at MM Institute of Medical Sciences and Research and Hospital
Abstract: The objective of the study was to evaluate the effectiveness of hot fomentation on leg discomfort among chronic kidney disease (CKD) patients. A Quasi experimental study was conducted on chronic kidney disease patients (n=60) at MMIMSR and Hospital, who were divided into two groups experimental and control group. The data was collected by leg discomfort rating scale. Hot fomentation was administered to CKD patients twice a day for three days …
Published in Research and Reviews: A Journal of Medicine · Vol. 4, Issue 3, 2014 · pp. 1–4 Read article
-
An Immunohistochemical Study to Assess the Role of Myofibroblasts in Diagnosing and Predicting the Outcome of Oral Squamous Cell Carcinoma
Abstract: Background: Squamous cell carcinoma (SCC) accounts for approximately 94% of all oral malignancies, hence establishing oral squamous cell carcinoma (OSCC) as one of the top 10 most prevalent malignant tumors. Cells with several functions, such as macrophages and myofibroblasts, play a vital role in the biological behavior of tumors. This study aimed to assess and evaluate the prevalence of myofibroblasts (MF) and macrophages in SCCs occurring in the oral region. …
Published in International Journal of Cell Biology and Cellular Functions · Vol. 2, Issue 1, 2024 · pp. 13–17 Read article
-
From Waste to Strength: Hybrid Binder Approach for Sustainable M25 Concrete
Abstract: The growing demand for concrete in infrastructure development has led to increased cement consumption, raising serious environmental concerns due to high energy use and carbon dioxide emissions correlated with cement manufacturing. In this context, the use of industrial residues as partial substitutions for cement has achieved deep focus as a sustainable construction strategy. The current investigations experimentally explore the strength and quality performance of concrete produced using a hybrid binder …
Published in Journal of Construction Engineering, Technology & Management · Vol. 16, Issue 1, 2026 · pp. 24–32 Read article
-
Advanced Micromachining with Abrasive Jet Machining: Experimental Observations and Model Comparisons
Abstract: Abrasive Jet Machining (AJM), also known as Micro Blast Machining, is a non-traditional machining process that removes material through the erosive action of a high-velocity gas jet carrying fine abrasive particles. This process is particularly effective for machining intricate shapes in hard and brittle materials that are heat-sensitive and prone to chipping. Similar to sandblasting, AJM is widely utilized for tasks such as deburring, rough finishing, and micromachining, especially in …
Published in Journal of Instrumentation Technology & Innovations · Vol. 15, Issue 3, 2025 Read article