Search
216 articles for “simulations”
-
Dynamic Modeling and Simulation of Multi-Body Mechanical Systems: A Comprehensive Review of Methods, Tools, and Applications
Abstract: The dynamic modeling and simulation of multi-body mechanical systems (MBS) form a cornerstone in modern mechanical engineering, enabling in-depth analysis of the kinematic and kinetic behaviors of interconnected rigid and flexible components. MBS are foundational to a range of critical applications, from automotive suspensions and aerospace mechanisms to robotics and biomechanical structures. As system complexity and performance requirements increase, accurate and scalable modeling techniques are essential for both design validation …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 35–42 Read article
-
Simulation and Experimental Analysis of Heat Treatment for Steel Tie Rods: A Review
Abstract: The study is related to the actual heat treatment and simulation of the physical deformation of the steel tie rod and compares the observations for process optimization. The general methodology is to go for either traditional or induction hardening after getting the chemical composition of the material, followed by tempering, which is a key technique for improving the mechanical properties of materials, strength, hardness, etc., and to release stresses. This …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 43–51 Read article
-
Modelling Electronic Diode Networks with PSPICE Simulation
Abstract: The dual of Thevenin, Norton equivalent circuit is used in place of any circuit/network of linear sources and immittances at at a given frequency. Both Thevenin with Norton theorem is useful for analyses and modification of circuits, to study /obtain network’s steady state response and initial condition. Methods to represent different circuits with Thevenin/Norton impedances connected at desired nodes are given using Spice/Pspice. The Thevenin/Norton impedances connected are of other …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 2, Issue 2, 2024 · pp. 17–37 Read article
-
Simulation and Analysis of Battery Pack Using the Multi Scale Multi-Domain Battery Model
Abstract: The creation of sophisticated simulation models has been made necessary by the need for reliable and effective battery packs in energy storage systems and electric vehicles. This study focuses on the simulation and analysis of battery packs using a multi-scale multi-domain battery model. The model enables a thorough knowledge of battery pack behavior across a range of operating situations by integrating the electricity, thermal, and mechanical domains. Multi-scale modeling bridges …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 2, 2024 · pp. 31–46 Read article
-
Numerical Simulation of Crack Growth in Dynamic Loading Conditions
Abstract: Because it is crucial for forecasting structural failures in engineering applications, crack formation in materials under dynamic loading circumstances has become a crucial study topic. In this work, finite element methods (FEM) are used to numerically simulate fracture propagation in dynamic stress situations. The impact of loading rates, material characteristics, and crack geometries on crack growth patterns are assessed in a thorough parametric research. The work uses sophisticated computational methods …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 30–34 Read article
-
Design and Simulation of Solar Powered Semi-Automatic Grass Cutter
Abstract: The maintenance of large area of grass lawns has always been a tedious task considering continuous human labour and long hours of work. Inorder to reduce the fatigue human work a novel design of automated grass cutting machine powered with a solar panel is designed and simulated for remote operated functioning. The mechanism works with the skeletal frame of a normal grass cutting machine face lifted with ultrasonic sensor for …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 17–24 Read article
-
Design and simulation of Solar Powered Automated Dual Rotor Mechanism for Sugarcane Harvesting
Abstract: Sugarcane being the vast cultivated cash crop of India’s agricultural economy has undoubtedly one of the most difficult harvesting processes. The existing mechanisms to harvest sugarcane are costly and are not affordable by rural based farmers. In this project a novel design mechanism is suggested that would serve the purpose of harvesting with least manpower, being cost effective and serving the purpose of cutting, stripping, sorting and loading of the …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 4, Issue 1, 2026 Read article
-
Simulation and Experimental Analysis of Abuse Testing for Prediction of Life Cycle for Lithium Ion Battery Cell and Pack Level
Abstract: Lithium-ion batteries play a crucial role in contemporary technology, serving as the power source for everything from consumer gadgets to electric vehicles. However, their safety and longevity are significant influenced by the reperformance under extreme conditions, commonly referred to as ab use testing .This paper explores the simulation and analysis of ab use testing and life cycle prediction for lithium-ion batteries at both the cell and pack levels. Abuse testing …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 2, 2024 · pp. 1–24 Read article
-
Sliding Mode Control of SolidWorks Designed Robotic Manipulator Co-simulated in MATLAB
Abstract: This study proposes a Sliding mode control (SMC) algorithm for controlling three degrees of freedom (3DOF) robotic arm. This concept was inspired by seeing the increasing of potential applications of robotic arm in automation industry, mainly in the applications like pick and place. The 3DOF robotic arm is designed in SolidWorks and then it is imported to MATLAB for simulation purposes. Initially, simulations are done by using the conventional PID …
Published in International Journal of Advanced Control and System Engineering · Vol. 1, Issue 1, 2023 · pp. 7–14 Read article
-
Comparative Analysis of Kinetic Models for Simulation of Biogas Production from Cow Dung and Fruit Waste via Anaerobic Digestion
Abstract: This study investigates the optimization of biogas and biofertilizer production from cow dung and fruit waste through anaerobic digestion, utilizing various microbial growth kinetic models. Simulations were conducted using the Monod, Moser, Contois, and Tessier models to predict biogas yield and assess model accuracy. Results indicated that the Tessier model provided the closest fit to experimental data, with a biogas yield of 0.45 m³/kg VS, while the Monod model overestimated …
Published in International Journal of Membranes · Vol. 2, Issue 1, 2025 · pp. 47–63 Read article
-
Analysis of Friction Stir Welding Utilizing ANSYS: A Study Based on Simulation
Abstract: Friction Stir Welding (FSW) represents a sophisticated solid-state welding methodology that has attracted considerable scholarly attention due to its efficacy in amalgamating high-strength, lightweight substrates including aluminium, magnesium, and titanium alloys. FSW enables the fabrication of defect free products with a substantial amount of mechanical and wear properties. The process is highly sensitive to various parameters that significantly influence the quality and strength of the final product. Studies have shown …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 62–77 Read article
-
Design and Simulation of Low-power, High-speed Effective Area Mux Based One-bit Full Adder Using CMOS Technology
Abstract: Our findings reveal a novel kind of circuit capable of performing both XOR and XNOR operations in parallel. Power dissipation and delay are both greatly reduced in the proposed circuits due to their low output capacitance as well as minimal short-circuit power dissipation. We show six new hybrid 1-bit full-adder (FA) circuits that take use of the XOR-XNOR or XOR/XNOR gates' special full-swing function. Each potential circuit layout has both …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 1, Issue 1, 2023 · pp. 25–33 Read article
-
Lamivudine And Dolutegravir Simultaneous Dosage Forms Determined and Validated Using The RP-UPLC Method
Abstract: RP-UPLC has been used to produce a straightforward, precise, and accurate approach for the simultaneous estimation of dolutegravir and lamivudine in a pharmaceutical dose form. A HSS C18 column of 2.8 x 50 mm and featuring particles with a size of 1.6 μm was used to process the chromatogram. A mixture of 70:30 Buffer Na2HPO4 and methanol made up the mobile phase, which was pushed across the column at a …
Published in Emerging Trends in Personalized Medicines · Vol. 1, Issue 1, 2024 · pp. 5–13 Read article
-
Design Analysis of PALF Natural Fiber Composite Laminate under Tensile Loading Condition using Simulation Approach
Abstract: Plant-based fibre reinforced materials are increasingly being employed for a variety of structural and non-structural purposes. Plant and animal-based fibres have different characteristics depending on a variety of circumstances. Mechanical qualities are primarily determined by parameters such as matrix, fillers, fibre content, fibre treatment, and fabrication techniques. The present work aim in analyzing the PALF natural fiber using simulation approach. In the process laminates are prepared as per ASTM standards …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 2, 2023 · pp. 23–29 Read article
-
Multi-phase Flow Simulation Using Computational Fluid Dynamics
Abstract: Computational fluid dynamics (CFD)-based multi-phase flow simulation is a fast developing topic with broad applications in many scientific fields and industry. An extensive account of current developments, difficulties, and uses in multi-phase flow simulations is given in this review paper. Important modeling strategies, numerical methods, validation procedures, and new developments in CFD-based multi-phase flow analysis are covered. This paper is to contribute to the ongoing development and use of CFD …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 1, Issue 2, 2023 · pp. 28–34 Read article
-
Influence of Mechanical Parameters on Corrosion Behavior of Metal Coupons in Simulated Environmental Conditions
Abstract: This study investigates the influence of mechanical parameters—namely applied stress, surface roughness, and deformation history—on the corrosion behavior of metal coupons exposed to corrosive environments. Mild steel and aluminum alloy specimens were prepared with controlled variations in tensile stress, polishing grades, and cold-working levels to simulate real-world mechanical influences. These coupons were immersed in a 3.5% NaCl solution under ambient conditions, and their corrosion rates were monitored over a 30-day …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 6–12 Read article
-
Design and Simulation of Low Power Allow Area High Speed Carry Save Adder using CMOS 16 nm Technology.
Abstract: In this article, we propose a novel 1-bit hybrid full adder circuit that is implemented using eighteen transistors. Simulations are done using the Mentor Graphics Tool 16nm technologies. The performances are evaluated based on their speed, average power consumption, and power-delay product. The essential components of arithmetic units including compressors, comparators, parity checkers, etc. are full adders. Thus, raising the performance of the entire adder will raise the system's performance. …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 1, Issue 2, 2023 · pp. 17–28 Read article
-
Analysis and Simulation of VLAN Using Cisco Packet Tracer
Abstract: The acronym for Virtual Local Area Network, or Virtual LAN, is VLAN. We build this unique network from one or more pre-existing LANs. In order to provide scalable, dependable, and secure services regardless of location, today's networks must always be accessible from anyplace. Reducing users and workgroups that are separated is the main objective of a network. Each system must have the ability to interact with other systems and transmit …
Published in International Journal of Satellite Remote Sensing · Vol. 1, Issue 2, 2023 · pp. 28–33 Read article
-
Exploring DHCP Protocol Administration: A Packet Tracer Simulation Study
Abstract: The following functions of DHCP are included to lessen network administration: TCP/IP setting that is automated and centralized. the capability of centrally defining TCP/IP setups. the use of DHCP options to allocate a complete range of additional TCP/IP configuration values. DHCP runs at the application layer of the TCP/IP stack. Although this essay will concentrate on Windows NT, another advantage of DHCP is that it is compatible with a wide …
Published in International Journal of Radio Frequency Innovations · Vol. 1, Issue 2, 2023 · pp. 1–11 Read article
-
Implementing and Analyzing Network Commands in Cloud and Edge Computing Environments with Cisco Simulators
Abstract: The present review examines edge and cloud topologies and compares them according to latency. Instead of using distant data centers like cloud computing platforms, edge computing designs process data physically close to the source. Increased demand for Internet of Things (IoT) devices, which are growing more concerned with real-time data processing and analysis, has fueled the expansion of edge computing and cloud computing. In essence, each of these designs offers …
Published in International Journal of Satellite Remote Sensing · Vol. 2, Issue 2, 2024 · pp. 62–69 Read article