Search
23 articles for “vertical reinforcement.”
-
Performance of Circular Model Footing Resting on Sand Bed Reinforced with Vertical Reinforcement in Dry Condition
Abstract: Soil stabilization is the process of improving the engineering properties of the soil. The good old method of stabilization is by using the chemicals stabilization, whereas the recent method of improving the strength of the soil is by using the vertical reinforced earth. In the present work sand is filled in the 250x250x375 mm MS tank by using sand raining technique at a relative density of 67%. MS circular plate …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 1–9 Read article
-
Wear Attribute of Aluminium Metal Matrix Composite Reinforced With MWCNT, Produced By FSP, On A Vertical Milling Machine
Abstract: The exceptional properties of Aluminium metal matrix composites (AMMCs) like good hardness, specific strength, enhanced wear rate made huge demand in the automobile and aerospace industries. The classical methods of manufacturing AMMCs leave problems at the interface of matrix and reinforcement segregation, like an agglomeration of reinforcements, wettability etc. To overcome this, an alternate, innovative method of fabricating aluminium matrix surface composites has been invented, which is termed friction stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 525–539 Read article
-
Assessment of the Reinforced Slope Stability Under Earthquake Loading
Abstract: Failure of the soil slopes by dynamic excitation is one of the most vital geotechnical earthquake hazards which may lead to serious destruction to the bridge abutments, dams, embankment, and structures resting on the slope. Moreover, due to deficient space available for the construction of slopes in urban areas, high and steep slope is constructed by geotextile reinforcement slopes. In this study, numerical modelling is made to study the behaviour …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 2, 2021 · pp. 29–37 Read article
-
Study of Diagonal Ties and Metal Plate as a Confining Reinforcement for RCC Short Columns
Abstract: Column is a most important structural member in the structural system. Even after the strong column weak beam theory used in the design of the structural member it has been observed that the many times structure collapsed due to the failure of the column. There are many reasons of the column failure but out of that major reason of the failure is ineffective confinement of the column specimen and uneven …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 39–46 Read article
-
Seismic Response Characterization of Vertically Irregular Multi-Storey Buildings Incorporating Mass and Stiffness Variations Using E-TABS Software
Abstract: The increasing demand for innovative architectural designs has led to the widespread use of vertically irregular configurations in high-rise reinforced concrete (RC) buildings. However, such irregularities significantly influence structural performance under seismic loading conditions, leading to complex structural behaviour and stress concentration at specific levels This study focuses on evaluating the seismic behaviour of vertically irregular multi-storey buildings using nonlinear time history analysis, which provides a realistic representation of structural …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 3, 2026 Read article
-
Finite Element Modeling of Asphalt Concrete Pavement Reinforced with Geogrid by Using 3-D PLAXIS Software
Abstract: This paper presents an axisymmetric finite element (FE) model to analyze the behavior of unreinforced and geogrid reinforced asphalt concrete pavement subjected to various tire pressures. The model was loaded with an incremental loading from 100 to 600 kPa with 50 kPa increment and the critical pavement responses such as total stress and vertical surface deflection were determined for unreinforced and geogrid reinforced flexible pavement. The results indicated that during …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 12–20 Read article
-
Analysis of Steel Chip Fiber Reinforced Composite Dual Pile Under Lateral Load Conditions on Sloping Terrain
Abstract: Pile foundations, in addition to supporting vertical loads from superstructures, are subjected to lateral stresses arising from seismic activities, wind gusts, water currents, and traffic impacts etc. Failure to account for these lateral forces can pose significant risks if the structure is expected to encounter any form of lateral pressure. Previous research has investigated the behavior of individual composite piles under horizontal forces, considering different soil properties, to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 210–220 Read article
-
REVIEW ON BEHAVIOUR OF R.C.C FRAMES
Abstract: Reinforced concrete (RC) frames consist of horizontal elements and vertical elements connected by rigid joints.This review gives an idea about various parameters have been derived about RCC Frames from different researches. Based on previous studies and observations, a conclusion have been made that an In-filled wall in the multi story building can resist the lateral load and also helps in getting the good strength and stiffness.
Published in Journal of Construction Engineering, Technology & Management · Vol. 9, Issue 1, 2019 · pp. 17–20 Read article
-
PERFORMANCE-BASED WIND RESPONSE ANALYSIS OF TALL RCC IREGULAR STRUCTURES USING AUTODESK REVIT AND ROBOT STRUCTURAL ANALYSIS
Abstract: The increasing trend of vertical construction has made wind effects a critical consideration in the design of tall reinforced concrete (RCC) buildings. The response of such structures is largely governed by their geometric configuration, stiffness characteristics, and modelling accuracy under wind loading conditions Wind loads are evaluated based on standard provisions such as IS 875 (Part 3): 2015, which provide essential guidelines for structural safety This study focuses on evaluating …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 3, 2026 Read article
-
Geosynthetic polymeric material Reinforced Model Shallow Foundation's Monotonic and Cyclic Uplift Response Affected by Ground Inclination
Abstract: The foundation system of any structure is vital for ensuring safety, serviceability, and performance, particularly when subjected to vertical and uplift forces. While conventional foundations are primarily designed to resist compressive loads, structures such as transmission towers, offshore platforms, buried pipelines, retaining systems, and marine facilities are frequently subjected to uplift forces generated by wind, waves, buoyancy, and cyclic loading. Under such conditions, the uplift resistance of soil and uplift …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Simplified Solution to Analysis Risk Assessment of Reinforcement type Soil Wall Considering Seismic Waves with Uniform Surcharge
Abstract: Due to failure of reinforced soil wall in various country the various risk factor are associated to these failure. In the present pseudo-static analysis some risk factor analysis have been done by considering the seismic waves with uniform surcharge and also consider surcharge’s inertial behavior at risk factor of horizontal and vertical coefficients of accelerations at kh = 0.24, 0.36 and kv = 0.12, 0.18 taking into account. The earlier …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 452–458 Read article
-
Assessing the Poisson Ratio of Reinforced Earth under Static and Dynamic Stresses
Abstract: Poisson’s ratio is an essential property of the soil strength and it is a measure of the amount of lateral strain in the soil sample caused due to the longitudinal strain of the soil. An attempt has been made in the present work to detect the variation in the Poisson ratio for reinforced and asphalt stabilized soil when tested under static and dynamic compressive stresses. Soil embankment model was prepared …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 1, 2023 · pp. 50–56 Read article
-
REVIEW ON ANALYSIS OF DOME.
Abstract: This paper represent review on analysis of dome for different bracing system. In this work the proposed dome is modelled, analysis and design to be done by using SAP2000. The designed reinforced concrete domes have been made for normal braces i.e. polygonal faces, triangular faces, and zipper bracing system. The vertical member added in triangular faces i.e. strut is called as zipper frame. Analysis and design is done for three …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 1, 2019 · pp. 1–5 Read article
-
Buckling of Column of Supporting Frame Structure : A Review
Abstract: Column is a vertical strut or structural member which is subjected to an axial compressive load used for supporting purpose. For column, materials like reinforced concrete and mild steel are widely used. Angle section, I-section, channel section, box section are the common type of sections used for column. A form of deformation or sudden sideway failure of column occurs due to high axial compressive force is termed as buckling. When …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 31–40 Read article
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Analysis of Specially Configured Large Ferrocement Water Tank
Abstract: Ferrocement construction technology is quite popular throughout the world for a long time. Ferrocement, a thin element composite of cement concrete mortar, wire mesh with skeleton steel is used as a building construction as well as a repair material. In this work, a special configuration is selected with different bar arrangement used for supporting skeleton steel in a large ferrocement water tank. Welded wire mesh is used in this water …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 12–19 Read article
-
Drilling Parameters Optimization in LM6/B4C/Fly ash Hybrid Composites by Taguchi Technique
Abstract: Aluminium matrix composites (AMCs) are challenging to machine due to its abrasive characteristics. Because of the broad adoption of MMCs, it is vital to create sufficient equipment to facilitate efficient manufacturing. The current study utilizes signal-to-noise ratio (S/N) analysis to determine the ideal machining parameters for drilling AMC’s. The goal with this study is to investigate the effect of feed rate (FR), drill type (D), speed (SS), reinforcing material R …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 890–897 Read article
-
Magnetorheological Composite Dampers for Railway Wagon Suspension: Modelling Validation and Performance Analysis
Abstract: Railway wagons encounter continuous vibrations due to track irregularities, resulting in reduced ride comfort and higher dynamic loads. Conventional suspension systems based on springs, hydraulic dampers, or air suspensions provide only limited vibration mitigation. This work investigates the application of magnetorheological (MR) fluid-based dampers, where a polymeric carrier oil (silicone oil) reinforced with carbonyl iron particles serves as a smart composite suspension medium. The MR fluid is synthesized and characterized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 43–63 Read article
-
Multiphysics Optimization of Polymer–Metal Hybrid Electrode Geometry in Electrostatic Precipitators for Enhanced Particle Collection Efficiency
Abstract: Electrostatic precipitators (ESPs) remain one of the most effective technologies for controlling fine particulate emissions in industrial exhaust systems. However, their performance is strongly influenced by electrode geometry and material characteristics, which govern electric field distribution, corona stability, and particle migration behaviour. In this study, a comprehensive numerical investigation is carried out to optimize electrode geometry using a multiphysics modelling framework, while introducing a novel polymer–metal hybrid design to enhance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 701–716 Read article
-
Fabrication and Flammability Assessment of Hybrid Composite Material Reinforced with Natural Fibers
Abstract: The utilization of natural fibers in composites has surged owing to their sustainable advantages. Natural fibers, categorized by their origin into plant, mineral, and animal fibers, have garnered significant attention. This study focuses on flax and wool fibers as representatives of natural fibers, paired with epoxy as the matrix material. The properties of flax and wool fibers were reviewed and found that wool has good fire retardancy property while flax …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 273–284 Read article