Search
95 articles for “temperature reduction”
-
Optimizing Fin Parameters to Enhance Passive Heat Dissipation in Photovoltaic Panels
Abstract: This study explores passive cooling techniques to enhance the thermal management of photovoltaic (PV) modules, which is crucial for maintaining efficiency. A computational fluid dynamics (CFD) model, using ANSYS Fluent, was developed to evaluate three fin shapes: rectangular, trapezoidal, and triangular, attached to the back of PV modules. The study varied parameters such as fin count, thickness, and length to determine optimal configurations for cooling. Among the designs, triangular fins …
Published in International Journal of Radio Frequency Innovations · Vol. 2, Issue 2, 2024 · pp. 25–35 Read article
-
Lighting Design in Office Spaces: Illuminating the Path to Productivity and Well-being
Abstract: Lighting design in office spaces refers to the intentional planning and implementation of lighting solutions within a workplace environment to meet the functional, aesthetic, and psychological needs of occupants. This research paper delves into the intricate connection between lighting design, mood regulation, and productivity levels within office spaces. Through a comprehensive analysis of existing literature, it investigates how various aspects of lighting, including colour temperature, intensity, distribution, and dynamics, influence …
Published in International Journal of Environmental Planning and Development Architecture · Vol. 2, Issue 1, 2024 · pp. 38–53 Read article
-
Experimental and Simulation Study on Reduction Kinetics of Magnetite Ore by using Hydrogen
Abstract: In the present work, magnetite ore fines pellets were prepared for a study of reduction kinetics using hydrogen gas. In the present work, various parameters are investigated to assess their influence on reduction kinetics with respect to hydrogen utilisation. The different input variables influence the process, yielding the reduction fraction. The effect of temperature on reduction kinetics with hydrogen flow rate was explored for the optimum value of these parameters. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 Read article
-
Sustainable Construction: A Case Study of Passive Cooling Using Various Insulation Materials in an Educational Institution
Abstract: This case study is about insulating an education building where steel sheets are used on the rooftop. Steel roof sheets are good conductors of heat and due to which the classrooms below become heated up especially in the summer season from January to May every year. This educational building was constructed in 2014 and the heat build-up is intense and hence the top floor i.e. second floor was mostly unutilised …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 14, Issue 2, 2024 · pp. 23–31 Read article
-
Optimizing Heat Transfer Performance in CO2 Finned-Tube Gas Coolers: A Comparative CFD Study of Design Variations
Abstract: Computational fluid dynamics (CFD) simulations and mathematical analysis are used in this study to examine the heat transfer efficiency of CO2 fined tube gas coolers. To maximize heat transfer efficiency, CFD simulations were carried out on a variety of gas cooler designs with variable fin geometry, including offset strip fins, using the ANSYS Fluent program. Under the baseline design, there was a finned tube cooler measuring 610 mm in length, …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 3, 2024 · pp. 1–13 Read article
-
Heat Sink-PCM Device for PV Efficiency Improvement
Abstract: This paper is focused on the development of a second stage of a previous work where the PV panel efficiency is improved by using a hybrid system made up of a PCM attached to the rear side of the panel. This evolved stage incorporates a heat sink unit to improve the distribution of the heat removed from the panel; this improvement reduces the elapsed time to reach the steady state …
Published in Journal of Thermal Engineering and Applications Read article
-
IoT-Based Motor Protection and Control System Using PLC and ESP8266
Abstract: Because of their straightforward design and affordable price, single-phase induction motors are frequently utilized in residential and small-scale industrial settings. However, conventional direct-on-line (DOL) control provides fixed-speed operation and offers limited protection against thermal overload and fault conditions. This article describes the design and implementation of an ESP8266 Node MCU-based PLC- based closed-loop motor control system with Internet of Things features. To increase operating flexibility and maintenance efficiency, the suggested …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 1, 2026 · pp. 54–62 Read article
-
Evaluating the Performance of a Smart VCR System Using Python for Data Analysis Based on IoT
Abstract: Commercial buildings use a significant amount of electricity, with around 60% to 80% being attributed to the HVAC system. Implementing IoT and smart sensors can help reduce this consumption by 10% to 30%. To lower the electricity usage of air conditioners, a study has proposed an IoT-based smart VCR system with sensors, meters, gateway, and cloud computing modules. This system is designed to collect data and regulate the VCR system …
Published in Journal of Control & Instrumentation · Vol. 15, Issue 2, 2024 · pp. 7–23 Read article
-
Metamaterial-Based Thermal Shielding Structures for Reusable Hypersonic Space Transportation Systems
Abstract: The rapid development of reusable hypersonic space transportation systems has intensified the need for advanced thermal protection technologies capable of withstanding extreme aerodynamic heating conditions encountered during atmospheric re-entry and sustained hypersonic flight. Conventional thermal shielding materials often suffer from high structural weight, limited adaptability, thermal fatigue, and degradation under repeated thermal cycling. This study proposes a novel Metamaterial-Based Thermal Shielding Structure for Reusable Hypersonic Space Transportation Systems, integrating engineered …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Effect of Process Variables on the Mechanical Characteristics of form Fabricated Materials
Abstract: Additive manufacturing prominent rapidly advancing technologies for producing 3D-printed products. Initially developed by stratasys, FDM technology emerged during the 1980s. This additive manufacturing technique builds products by extruding semi-molten material through a nozzle onto a platform. PLA and ABS are among numerous thermoplastics that are commonly used as filaments in this procedure. Purpose of research was to observe the effect of variables such as infill percentage, bed temperature, printing speed …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 2, 2025 · pp. 32–39 Read article
-
Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature
Abstract: This work, analysis and simulates a phase change material melting for battery thermal management (BTM). Phase change materials (PCM) are the substances that, undergo through a phase transition, such as melting from solid to liquid by absorbing or releasing a significant amount of energy as heat. PCM is advantageous for the thermal control of batteries because of this characteristic. As the battery produces heat, the PCM surrounding it absorbs the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 19–31 Read article
-
Simulation of Adder Circuit Using Reversible Gates in Verilog HDL
Abstract: The emerging field of quantum computing uses quantum logic gates. The reversibility of logic gates is an important aspect of quantum logic gates used in VLSI and quantum computing. Reversibility ensures that power consumption is minimized. This study explores the field of reversible logic and utilizes Peres gate to develop a full adder circuit that shows a significant reduction in power consumption in simulations performed in Xilinx Vivado. We have …
Published in Journal of VLSI Design Tools and Technology · Vol. 14, Issue 3, 2024 · pp. 32–38 Read article
-
Biopolymer–Cement Hybrid Panels from Recycled Paper Mill Reject: Experimental Characterisation and Machine Learning Optimization
Abstract: The increased rate of the accumulation of industrial residues in the developing countries is a major cause of concern for the environment. The current study brings forth the use of industrial residues in the form of the production of eco-friendly building materials as a sustainable approach to their valorization. The valorization of recycled paper mill reject, a cellulose-based biopolymeric industrial residue, is being addressed in this study as a reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 67–90 Read article
-
Sustainable Architecture for Rural Communities: The Tanzanian Family House Model
Abstract: Sustainable rural housing in East Africa must respond simultaneously to climatic stress, water scarcity, sanitation challenges, and socio-cultural practices. This article presents the Tanzanian Family House as a climate-responsive and resource-efficient housing model developed specifically for rural Tanzanian communities. The project integrates low embodied energy materials, passive environmental strategies, and decentralized infrastructure systems to create a durable and culturally grounded dwelling that can be constructed using local skills and materials. …
Published in International Journal of Rural and Regional Development · Vol. 4, Issue 1, 2026 · pp. 1–12 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Polymer–Gel Composite Phase Change Materials: A Functional Polymer Composite Approach for Solar-Thermal Energy Storage in Building Facades
Abstract: This study investigates polymer–composite phase change materials (PCMs) in the form of polymer–gel hybrids as multifunctional systems for solar–thermal energy storage in building façades. Paraffin- and PEG-based PCMs were embedded into polyurethane and acrylic gel matrices to create shape-stabilized polymer–composites with high PCM loading (70–80 wt%). Differential Scanning Calorimetry (DSC) confirmed distinct melting/freezing transitions at ~56°C (paraffin) and ~42°C (PEG), with enthalpy values of 120–150 J/g, closely matching theoretical predictions, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 36–51 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Fabrication and Assessment of Tribological Performance of Nickel-Graphene-MXene Hybrid Nano-composites
Abstract: As industries such as aerospace, automotive, defence, and electronics demand materials with superior wear resistance, high strength, and thermal stability, traditional metals are reaching their performance limits. Hybrid nanocomposites offer a pathway to meet these stringent requirements. In this study, novel Nickel-Graphene-MXene hybrid nanocomposites were fabricated using a powder metallurgy route, incorporating varying weight percentages (up to 2 wt.%) of MXene and 1 wt.% graphene nanosheets into a nickel matrix …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 780–798 Read article