Search
116 articles for “structural stiffness”
-
Evaluation of Shear Walls and Bracings in Irregular Buildings Under Seismic Load
Abstract: The structural integrity and stability of irregular buildings under lateral forces such as wind and seismic loads pose significant challenges in modern construction practices. Irregularities in a building & geometry and mass distribution can lead to uneven force distribution, making the structure more vulnerable to lateral displacement and potential failure. To enhance the resilience of such structures, shear walls and bracing systems are commonly employed to improve lateral load resistance. …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 22–28 Read article
-
Performance Based Seismic Evaluation of G+12 RCC Structures in Seismic Zone IV with and without Corner Shear Walls Considering Soil Types I, II, and III
Abstract: Seismic behavior of multi-storey buildings is significantly influenced by structural stiffness and supporting soil conditions. This study investigates the seismic response of a G+12 reinforced concrete building by comparing two structural configurations, namely buildings with shear walls and buildings without shear walls, under three soil conditions: Type I, Type II, and Type III soils. The analysis is carried out using the response spectrum method in accordance with IS 1893 (Part …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
The Influence of Soil Types on the Performance of the Building Frames: A Dynamic Analysis
Abstract: The dynamic response of the building structure is to a large extent dependent on the nature of the supporting soil. Soil stiffness and damping metrics fluctuation can cause significant tension in the behaviour of building skeleton when exposed to dynamic loads such as earthquake or wind. This research aims to evaluate how different soil conditions namely hard, medium, and soft soils impact the seismic performance of building frames under dynamic …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 25–27 Read article
-
Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V
Abstract: Wind load is one of the most critical factors influencing the design and serviceability of high-rise reinforced concrete (RCC) buildings. As building height increases, wind-induced effects such as storey drift, lateral displacement, and structural stiffness become dominant design considerations. Numerous studies have been conducted using conventional and advanced techniques such as Finite Element Method (FEM), Computational Fluid Dynamics (CFD), and Building Information Modelling (BIM). However, limited research focuses on comparative …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Seismic Response Characterization of Vertically Irregular Multi-Storey Buildings Incorporating Mass and Stiffness Variations Using E-TABS Software
Abstract: The increasing demand for innovative architectural designs has led to the widespread use of vertically irregular configurations in high-rise reinforced concrete (RC) buildings. However, such irregularities significantly influence structural performance under seismic loading conditions, leading to complex structural behaviour and stress concentration at specific levels This study focuses on evaluating the seismic behaviour of vertically irregular multi-storey buildings using nonlinear time history analysis, which provides a realistic representation of structural …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 3, 2026 Read article
-
Dynamic Response Analysis of Isotropic and Orthotropic Rectangular Plates under Clamped-Free Conditions
Abstract: This study explores Theoretical and numerical tools of determining the free vibration properties of isotropic and fiber-reinforced composite rectangular plates. The effect of anisotropy of materials on the dynamic response of the plates is compared between the Aluminium plates and the glass-epoxy laminates. The model used in the study is a three-dimensional finite element model that is designed using a combination of SolidWorks and ANSYS workflow. Clamped-free boundary conditions are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 258–274 Read article
-
Comparative Analysis of Serial and Parallel Robot Mechanisms for Industrial Automation
Abstract: Serial and parallel manipulators represent two major mechanical architectures in industrial automation, each with distinct strengths and trade-offs. This study presents a detailed comparative analysis of serial-chain (open-kinematic) robots and parallel-kinematic manipulators (PKMs) with a focus on industrial automation tasks. It covers kinematics, static accuracy and stiffness, dynamics and actuation requirements, control and calibration burdens, workspace and singularity behaviour, and practical industrial considerations (cost, integration, safety, maintenance). Serial robots, exemplified …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 3, Issue 2, 2025 · pp. 22–26 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
A Futuristics Pyrolysis Technique: Conversion of Waste Plastic Polybags Into Fuel
Abstract: Plastics are high molecular weight materials composed of repeating polymer units and can be classified based on factors like chemical composition, structure, stiffness, application types, and processing methods. A key environmental issue with plastics is their non-biodegradability, causing them to persist in the environment. Pre-consumer plastic waste includes manufacturing defects, rejected items, and excess materials produced during virgin plastic manufacturing. In India, around 15,342 tons of plastic waste are collected …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 1–13 Read article
-
Analysis of Proposed Diagrid Geometry Using Golden Ratio in Non-Linear Regime of Material
Abstract: Lateral loads are critical in the design of high-rise structures. The buildings need to have high stiffness and must be able to resist lateral deformations and torsional rotations without having discomfort to the user. Diagrid structural system is one of the systems used in resisting lateral forces. In this study, diagrid geometry is generated using the ‘Golden Ratio’ concept and used to model 40, 50, and 60 story structures. Two …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Comparative Analysis of Vertical Geometric Irregular Buildings by Fragility Curve Using Pushover Analysis
Abstract: The present work deals with the analysis of vertical geometric irregular structures, such as step buildings and setback buildings, which exhibit stiffness irregularity at different locations. These structures are analyzed using pushover analysis, a nonlinear static analysis method that provides insight into the performance of buildings under seismic loading by incrementally applying lateral forces until a target displacement is reached or the structure collapses. Stiffness irregularities in buildings can significantly …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 2, 2024 · pp. 1–14 Read article
-
Seismic Analysis of Alternate Outrigger System
Abstract: In regions characterized the concept of construction sequence analysis, explain that this method involves analyzing a structure's behavior over time, considering the chronological order of construction stages. Introduce the crucial aspects of time-dependent effects, specifically creep and shrinkage, explain that these factors cause deformations in concrete over time and can significantly influence the structural behavior of buildings. In this study deals with non-linear construction stage analysis of G+14 structure as …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 1, 2024 · pp. 16–25 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Solid Acid Catalysts for the Selective Conversion of Biomass to Levulinic Acid
Abstract: Levulinic acid (LA) has emerged as a versatile platform chemical with significant potential for producing renewable fuels like gamma-valerolactone (GVL), biodegradable polymers, and fine chemicals from biomass (both terrestrial and marine which ae rich in carbohydrate). The selective conversion of biomass-derived carbohydrates to LA requires efficient catalytic systems that can overcome the recalcitrance of the biomass, namely the stiff-necked structural integrity of cellulose and the kind of strong interactions between …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
Comparative Performance Assessment of Shear Wall and Diagrid Systems in an Octagonal Tall High-Rise Building under Seismic and Wind Loads
Abstract: The increasing demand for high-rise structures due to rapid urbanization necessitates the adoption of efficient lateral load-resisting systems to ensure structural safety, stability, and serviceability. This study presents a comparative evaluation of the seismic and wind performance of a Ground plus Fiftystorey high-rise building with an octagonal plan, incorporating different structural configurations such as shear wall arrangements and a diagrid system. A total of six analytical models, including a conventional …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
AI-Assisted Design and Theoretical Aerodynamic Evaluation of a Multistage Conical Diffuser Micro Wind Turbine Fabricated from Polymeric Composites
Abstract: The rising demand for compact, lightweight, and high-efficiency renewable energy systems has accelerated the development of micro wind turbines capable of delivering stable performance under low wind conditions. Traditional bare-rotor micro turbines suffer from limited aerodynamic efficiency, motivating the adoption of diffuser-augmented architectures and advanced polymer-based composite materials. This study presents the AI-assisted conceptual design and theoretical aerodynamic evaluation of a multistage conical diffuser micro wind turbine fabricated using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1111–1118 Read article
-
Analyzing the Effects of Soil-Structure Interaction and Geometric Configuration on Structure
Abstract: This study investigates how varying soil types impact the seismic performance of a 30-story building, simulated using ETABS software. The research focuses on key parameters such as soil type, different shapes of structure, base shear, and inter-story drifts under different soil conditions, ranging from soft clay to dense sand. By comparing fixed-base models with those incorporating soil-structure interaction (SSI), the analysis highlights significant differences influenced by soil type. The findings …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 2, 2024 · pp. 1–15 Read article
-
Performance-Based Wind Response Analysis of Tall RCC Iregular Structures Using Autodesk Revit and Robot Structural Analysis
Abstract: The increasing trend of vertical construction has made wind effects a critical consideration in the design of tall reinforced concrete (RCC) buildings. The response of such structures is largely governed by their geometric configuration, stiffness characteristics, and modelling accuracy under wind loading conditions Wind loads are evaluated based on standard provisions such as IS 875 (Part 3): 2015, which provide essential guidelines for structural safety This study focuses on evaluating …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 3, 2026 Read article
-
Representation-Theoretic Symmetry Reduction and Fuzzy-Grey Optimization of Modular Vibration Systems
Abstract: This paper presents a representation-theoretic framework for symmetry-aware vibration control in modular structural systems. Exploiting cyclic symmetry, the mass, damping, and stiffness operators are block-diagonalised into irreducible representations, reducing the full structural dynamics to a collection of lower-dimensional modal subsystems. This decomposition provides both computational efficiency and a rigorous mathematical description of symmetry-preserving dynamic behaviour. To account for imperfections arising in practical implementations, near-symmetry defects in stiffness and damping are …
Published in Emerging Trends in Symmetry · Vol. 2, Issue 1, 2026 · pp. 22–30 Read article
-
Flexural Vibration of Non-Uniform Beam on Bi-Parametric Foundation Under Harmonic Moving Load with Non-Classical Boundary Conditions
Abstract: The dynamic response to harmonically varying moving loads of non-uniform elastic beam resting on bi-parametric foundation with non-classical boundary condition, time dependent in particular is examined in this paper. Here, the beam is considered non-uniform, with the moment of inertia and the distributed mass varying continuously along the span L as functions of the position 𝑥. In order to guarantee a more stable structure and a reduce risk of resonance, …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 28–42 Read article