Search
26 articles for “soil reinforcement”
-
Behavioural Study on Synthetic Fibre Reinforced Soil Cement Stabilized Blocks
Abstract: It has been shown that the most prevalent material is soil. It is essential to the manufacture of bricks. It is well known that burned bricks function well for masonry projects, providing durability and structural integrity that are vital for construction applications. Furthermore, a significant amount of heat energy is utilized during the heating process that creates them, thus emphasizing the energy-intensive nature of brick production. In addition, children are …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 265–292 Read article
-
Simplified Solution to Analysis Risk Assessment of Reinforcement type Soil Wall Considering Seismic Waves with Uniform Surcharge
Abstract: Due to failure of reinforced soil wall in various country the various risk factor are associated to these failure. In the present pseudo-static analysis some risk factor analysis have been done by considering the seismic waves with uniform surcharge and also consider surcharge’s inertial behavior at risk factor of horizontal and vertical coefficients of accelerations at kh = 0.24, 0.36 and kv = 0.12, 0.18 taking into account. The earlier …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 452–458 Read article
-
Soil Stabilized Road
Abstract: This research examines the suitability of soil-stabilized roadways for light vehicular movement, offering an economical and practical alternative for areas with limited infrastructure development. Stabilizing soil involves improving its engineering properties by incorporating additives such as cement, lime, or other binding materials. Through stabilization, the treated soil can achieve a compressive strength of approximately 5 N/mm², or 500 tonnes per square meter (t/m²), which is sufficient to support loads imposed …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 38–42 Read article
-
POLYMER AND COMPOSITE-BASED GEOSYNTHETIC REINFORCEMENTS FOR SEISMIC STABILITY OF SOIL RETAINING STRUCTURES: MATERIALS, MECHANICS, AND PERFORMANCE REVIEW
Abstract: Geosynthetic materials based on polymer and composites have become important items for the structural performance and seismic resilience of the reinforced soil retaining systems. Mechanically stabilized earth walls in recent geotechnical engineering practice are increasingly based on enhanced polymeric reinforcements for enhanced tensile strength, durability, flexibility, and energy dissipation under dynamic loading. High-density polyethylene, polypropylene, polyester, and fiber-reinforced polymer composites are usually used. The present review focus on the recent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
An Experimental Study on The Effect of Geopolymeric Composite Reinforcement on Soil Subgrade for Flexible Pavements
Abstract: The use of geo-synthetics, such as geotextiles, has the potential to enhance the inherent engineering and geotechnical properties of subgrade soils that exhibit poor conditions. The use of geotextiles in pavement construction has many advantages, including enhanced subgrade strength and the ability to construct flexible pavements that are both efficient and cost-effective since it reduces the pavement thickness. In the realm of flexible pavement system development, the significance of subgrade …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 132–140 Read article
-
Stabilization of Reinforced Earth Wall Backfill Using Steel Slag and Recycled PET Fiber: A Composite Material Approach
Abstract: Reinforced Earth (RE) walls are widely used in infrastructure due to their structural efficiency and ease of construction. However, they typically require high-quality granular backfill, which may not be readily available or cost-effective in many regions. This study investigates the potential of utilizing locally available sandy clay soil stabilized with industrial and plastic waste materials specifically 20% steel slag and 0.75% shredded polyethylene terephthalate (PET) fibers, as an alternative backfill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 110–127 Read article
-
Utilization of Recron Fibers for Improving Subgrade Stability of Expansive Soils
Abstract: The major interest in the utilization of synthetic fibers is used as reinforcing material for developing reinforcing effect into the entire soil composition laid bellow the structures whare as construction works are going on. Various articles are published on soil reinforcement, yet some of them fibers used are prepared by using with synthetic materials, one type of synthetic fibers were Recron fiber it is used as a reinforcing element to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 170–178 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Comparison of Index and Engineering properties of weak soils stabilized by Rubber Tyre Chips and Powder
Abstract: Engineered constructions on weak or soft ground soil carry inherent risks due to the instability of the foundation. Soft ground lacks the necessary strength to support structures adequately, making it prone to settlement, subsidence, or even collapse under the weight of buildings or infrastructure. Various methods of improvements are used to improve the soil's stability to support various loads.one of the solution is can use the waste products incorporated into …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 24–33 Read article
-
Impact of Red Stone Dust and Polymer Fabric in Enhancing the Properties of Black Cotton Soil
Abstract: To enhance the mechanical properties of problematic black cotton soil, engineers are focusing on reinforcing the soil with geosynthetic materials. This attention is particularly directed towards improving the strength characteristics of black cotton soil, given its inherent challenges associated with volume changes and plasticity. In this comprehensive study, red stone dust waste is introduced in varying percentages ranging from 5% to 35% to stabilize the black cotton soil. The goal …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 35–43 Read article
-
Structural Assessment of Rigid Pavement Systems Under Heavy Loading Conditions
Abstract: This study presents an analysis of pavement and foundation layer design subjected to heavy vertical loads and upward soil pressure. A total load of 1716 tonnes transmitted from the superstructure is considered acting on the pavement system. Due to upward soil pressure, tensile stresses develop in the foundation layers, requiring adequate thickness of sand and aggregate layers to ensure structural stability. Based on the tensile strength of sand (2 N/mm²), …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 36–48 Read article
-
Performance Based Seismic Evaluation of G+12 RCC Structures in Seismic Zone IV with and without Corner Shear Walls Considering Soil Types I, II, and III
Abstract: Seismic behavior of multi-storey buildings is significantly influenced by structural stiffness and supporting soil conditions. This study investigates the seismic response of a G+12 reinforced concrete building by comparing two structural configurations, namely buildings with shear walls and buildings without shear walls, under three soil conditions: Type I, Type II, and Type III soils. The analysis is carried out using the response spectrum method in accordance with IS 1893 (Part …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Behavior of SFRC composite pile resting on sloping ground of cohesive and non-cohesive strata
Abstract: Reinforced concrete piles are increasingly being utilized in situations where there is a need to transfer loads in deep strata, particularly for infrastructure projects built on sloping grounds. The present study comprises a finite element analysis (FEA) to investigate the lateral load-bearing capacity of steel fiber reinforced concrete (SFRC) pile, embedded in sloping grounds with sandy and clayey soils. The lateral load capacity of the steel fiber reinforced concrete pile …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 19–31 Read article
-
Sustainable High-Strength Geopolymer Composite Reinforced with Nano-Silica and Basalt Fibers: Mechanical and Microstructural Evaluation
Abstract: Sustainable soil composites (SSC) were formulated by incorporating red earth with varying proportions of bagasse ash (BA) and hydrated lime to enhance geotechnical performance and promote the reuse of agro-industrial waste. Red earth served as the primary structural matrix, BA functioned as a pozzolanic filler, and lime acted as a chemical stabilizer. BA content ranged from 0% to 60%, identifying 10% as the optimum level for significant improvement, and lime …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1113–1122 Read article
-
Enhancement of Soil Fertility Using Natural Fiber-Based Engineering Composite Materials for Higher Crop Production: A Review Paper
Abstract: Enhancement of Soil fertility using engineering composite materials via efficient nutrient management strategies is essential as is rising natural fiber based composite material crop production every land area unit to satisfy next diets and fiber consumption. Major developments have improved the production's nutrient-use economy Improved crop flexibility to applied nutrients, decreased off shore nutrient move, and greater predictions of the nutrients available to plants in the root zone have all …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 79–87 Read article
-
Analysis of the Impact of Seabed Earthquakes on Coastal Structures and Foundation Design
Abstract: Earthquakes in the seabed occur with varying magnitudes. Seabed earthquakes cause a rapid rise in water levels, which can lead to flooding and structural damage. Therefore, when designing buildings near the seashore, it is essential to account for the additional load on columns due to water thrust. Earthquakes occurring at the seabed generate intense ground acceleration of varying magnitudes, significantly affecting water levels and inducing destructive flooding along coastal regions. …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 3, 2025 · pp. 42–49 Read article
-
Analysis of Steel Chip Fiber Reinforced Composite Dual Pile Under Lateral Load Conditions on Sloping Terrain
Abstract: Pile foundations, in addition to supporting vertical loads from superstructures, are subjected to lateral stresses arising from seismic activities, wind gusts, water currents, and traffic impacts etc. Failure to account for these lateral forces can pose significant risks if the structure is expected to encounter any form of lateral pressure. Previous research has investigated the behavior of individual composite piles under horizontal forces, considering different soil properties, to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 210–220 Read article
-
Harnessing Marine and Agro-Waste Resources: Bioengineered Seaweed Polysaccharide–Coconut Films for Next-Generation Sustainable Packaging
Abstract: The increasing demand for biodegradable alternatives to petroleum-based plastics has led to significant interest in marine biopolymer-based packaging materials. This study focuses on the development of eco-friendly biocomposite films by reinforcing carrageenan, extracted from Kappaphycus alvarezii, with alkali-treated coconut at varying loadings (5%, 10%, and 15% w/w). The films were fabricated via solvent casting and subjected to comprehensive characterization. Mechanical analysis revealed substantial enhancement in tensile strength from 21.3 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 217–227 Read article
-
Corn Husk Fiber–Reinforced PLA Biocomposites: Mechanical, Thermal, and Biodegradation Performance
Abstract: The increasing environmental burden caused by conventional petroleum-based plastics has driven significant interest in the development of sustainable polymer composites reinforced with renewable natural fibers. In the present work, corn husk fiber (CHF), an agricultural waste by-product, was utilized as a reinforcing phase in a polylactic acid (PLA) matrix to fabricate eco-friendly biocomposites. Composite samples with varying fiber loadings (0–40 wt.%) were produced through twin-screw melt blending followed by compression …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 312–327 Read article
-
Characterization Of Bagasse Ash for Polymer Composite Applications: Reinforcement and Biocompatibility
Abstract: In present investigation, comparison of the survival rate of Bacillus megaterium inoculated in bagasse ash and charcoal is done which is widely used as a carrier material. An Isolate SB1 was isolated from the soil. This isolated SB1 was subjected for a study of cultural, morphological, and biochemical characteristics. By comparing all the studied characteristics and with reference to Bergey's manual of systematic bacteriology, Vol. II, an isolate SB1 was …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 374–378 Read article