Search
49 articles for “soaking”
-
Effect of Soaking Time on the Proximate Composition of Moringa Seeds Flour
Abstract: Effect of soaking on the proximate composition of Moringa seeds was investigated. Moringa seeds were soaked in deionized water for 24, 48 and 72 hours respectively, followed by draining, drying and milling. The unsoaked seeds were milled and serve as control. Results of the proximate composition were compared in the raw and soaked Moringa respectively. The moisture contents in Moringa seeds increased with soaking time (8.00% to 9.90%). Variation in …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 7, Issue 3, 2018 · pp. 17–19 Read article
-
Oxalate and Mineral Composition of Amoche [Arisaema Schimperianum Schott.] Influenced as Different Processing
Abstract: Oxalate content of amoche [Arisaema Shcimperianum S.] as influenced by different processing were determined by High Performance Liquid Chromatography. The mineral contents were also determined by Spectrophotometre. The different processing treatments were combinations of three levels of fresh, boiliing, drying and three levels of soaking in ginger, lemon and ethanol and neither heating nor boiling [control]. Different processing significantly [p<0.05] influenced the oxalate and mineral contents. The oxalate contents observed …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 9, Issue 1, 2020 · pp. 1–6 Read article
-
Utilization of Recron Fibers for Improving Subgrade Stability of Expansive Soils
Abstract: The major interest in the utilization of synthetic fibers is used as reinforcing material for developing reinforcing effect into the entire soil composition laid bellow the structures whare as construction works are going on. Various articles are published on soil reinforcement, yet some of them fibers used are prepared by using with synthetic materials, one type of synthetic fibers were Recron fiber it is used as a reinforcing element to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 170–178 Read article
-
Evaluation of False Yam (Icacina oliviformis) Seed Extract as Substitute for Antibiotics on Growth Performance and Carcass Characteristics of Broiler Chickens
Abstract: An experiment was carried out using broiler chickens to determine the effects of false yam seed extract on their growth performance. One hundred and fifty (150) chicks (Cobb strain) were selected and randomly divided into 15 groups of 10 birds each. Fresh false yam seed chips were soaked for 3 days (1 part of fresh seed to 2 parts of water) and extract was decanted and sieved through a fine …
Published in Research & Reviews : Journal of Herbal Science · Vol. 6, Issue 3, 2017 · pp. 4–8 Read article
-
An Experimental Study on the Effect of Tensile Properties and Hardness of AA6082-T6 under the Heat Treatment Conditions
Abstract: AbstractIn the present study, the experiments were performed to investigate the effect of heat treatment parameters viz. soaking time and temperature on the tensile properties and hardness of Aluminium alloy (AA) 6082-T6 sheet. The sheet was heat treated and cut the standard tensile specimen ASTM E8M-04tofind out the tensile properties and hardness value at different temperature with respect to different soaking time. Air circulation oven type electric furnace was used …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 36–41 Read article
-
Selection and Preparation of Solvent for Wax Dissolution in Heavy Crude Oil Wells
Abstract: Remedial measures for wax deposition problems in production wells are very hectic due to production down time and expenditure required for removal of heavy and waxy crude oil. Chemical treatment techniques with solvent formulation derived from many laboratory experiments were carried out with the waxy crude oil sample to recover the solidified wax inside the pipelines and wellbores. A list of chemical solvents including three dispersants was mixed in different …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 7, Issue 1, 2016 · pp. 50–57 Read article
-
Demonstration and Evaluation of Processing Method to Improve Nutritional Quality of Cassava (Manihotesculenta C.) Based Foods in SNNPR
Abstract: Among the most typical food sources is cassava of qulle variety by applying drying, boiling and soaking processing methods to decrease level of hydrogen cyanide factors using completely randomized design. The demonstration of processing methods and sensory evaluation bread was at Alibazer, Edegegn, Cheha, yem s/woreda district during 2020–2021. The lowest hydrogen cyanide content which meets recommendation of IITA not above 2–3 mg/100g was obtained with processed (soaked then sun …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 11, Issue 2, 2022 · pp. 34–38 Read article
-
Comparative Analysis of Nutrient Content and Cooking Characteristics between Binamoog and Sonamoog of Bangladesh
Abstract: A study was conducted to ascertain biochemical composition and cooking qualities of mungbean seeds (Vigna radiata). Two varieties, namely Binamoog and Sonamoog (Deshi) were included in the experiment. The varieties differed in their seed size, seed volume and seed density. In the proximate compositions, the moisture, ash, protein, fat, starch, total sugar and reducing sugar contents of Binamoog seeds were found as 12.35%, 3.97%, 22.79%, 1.20%, 49.15%, 2.73% and 2.12%, …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 5, Issue 2, 2016 · pp. 1–9 Read article
-
Effect of PWHT Cycle on Microstructure and Mechanical Properties of 1.25Cr-0.5Mo Weld
Abstract: Post Weld Heat Treatment (PWHT) is a process of reducing residual stresses and enhancing material properties of any material after welding. The process depends on many parameters like type of material, the thickness of material, PWHT temperature, soaking time, heating and cooling rate, etc. The Post Weld Heat Treatment process of material could effect on tensile strength, impact toughness, hardness, microstructure, etc. If the Process of PWHT is performed incorrectly …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 1, 2019 · pp. 7–16 Read article
-
CBR Behaviour of Soil Treated with Class ‘F’ Fly Ash
Abstract: Disposal of fly ash available at thermal power stations is not only a serious national issue but also causes endanger to the mankind if not properly utilized and handled. The study aims at making effective utilization of Class ‘F’ fly ash by mixing with soil in suitable proportions and showcasing its usage to be adopted in subgrade as well as subbase components in pavement infrastructures. Silty sand was mixed with …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 1, 2016 · pp. 33–43 Read article
-
Simulation of Dual Microstructure Heat Treatment Process and Residual Stresses in Gas Turbine Disc by DeformHT Software
Abstract: Gas turbine disc is one of the most vital components in advanced gas engine. In order to improve the tensile strength and fatigue strength of the disc, finer grain size is to be attained at bore area and coarser grain structure at rim area in order to resist the growth of creep. Attempts have been made by several researchers experimentally on the development of dual microstructure for Inconel-718 by heat …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 1, 2017 · pp. 30–42 Read article
-
Experimental Studies on the Use of Local Grinded Aggregate in Enhancing Stability, Reduction of Flow, Air-voids and Deformation of Modified Asphalt Concrete for Medium Collector Roads
Abstract: The adverse environmental impact of man-made and agricultural waste/by-products combined with the rising cost and difficulty in obtaining construction materials have influenced research into better ways to manage these wastes/by-products by incorporating them in asphalt concrete mix design. Different researches have shown that some agricultural waste/by-products can be included as mineral fillers in hot-mix asphalt concrete to obtain certain desirable properties. It is on this basis that this research attempts …
Published in Trends in Transport Engineering and Applications · Vol. 7, Issue 2, 2020 · pp. 1–11 Read article
-
Strengthening of Subgrade and Sub-Base of Bituminous Pavement Using RBI Grade 81
Abstract: Abstract The objective of the work is to determine the effectiveness of RBI Grade 81 for improvement in engineering properties of medium plasticity clayey soil. RBI Grade 81 was treated with collected soil sample at different dosages. Various samples have been made by mixing soil with 0, 2, 4, 6 and 8% RBI Grade 81; method of soil replacement is opted for the preparation of samples. After studying the properties …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 3, 2016 · pp. 27–32 Read article
-
Allelopathic Effect of Amaranthus Viridis.L Fresh Leaves on Chickpea Seeds Under in Vivo Condition
Abstract: Amaranthus viridis.L is a weed and its fresh leaves were collected from Charotar University of Science and technology campus. After cleaning the leaves were separated and taken for study purpose. One gram of fresh leaves was initially crushed to remove carotenoids. Then other one gram of fresh leaves was taken. Both types of fresh leaves along with control were considered for the experiment. Ten Chick pea (Cicer arientinum.L) seeds each …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 9, Issue 2, 2019 · pp. 26–29 Read article
-
Effect of Seed Priming with Extract of Cissus quadrangularis on Wheat and Mung Seedlings under Different Salt Concentrations
Abstract: Salinity stress inhibits plant growth by affecting morphological, photosynthesis, antioxidant phenomena, and nitrogen metabolism, among other physiological and biochemical processes. In this study, the effects of pre-soaking wheat and mung grains in aqueous extract of Cissus quadrangularis on growth, and antioxidant activity of salt-treated plants, were investigated. The pre-soaking of grains in extract demonstrated a significant enhancement in growth parameters. The activity of superoxide dismutase (SOD), guaiacol peroxidise (GPOX), ascorbate …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 10, Issue 3, 2021 · pp. 1–11 Read article
-
Exploration of Mechanical Characteristics and Microstructural Analysis of Copper Matrix Composites with Hybrid Reinforcements via Muffle Furnace Sintering
Abstract: Metal Matrix Composites (MMCs) have drawn a lot of interest in the area of innovative materials because of how widely they may be used. Due to their extraordinary qualities, such as high thermal conductivity, higher temperature endurance, improved corrosion resistance, and great weldability, copper matrix composites stand out among them. These qualities make them desirable and promising materials for uses including heat exchangers, automotive parts, and electrical components. In this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 119–126 Read article
-
Experimental Investigation of Date palm Leaf Fiber reinforced with polymer matrix composite.
Abstract: The demand for composites incorporating robust fibers is significant across diverse industries, driven by the favorable attributes of strength, lightness, and cost-effectiveness. Within GCC countries, date palm (DP) serves as a valuable source of cellulosic fibers, highly esteemed for its widespread availability. These fibers can be sourced from midribs, spadix stems, leaflets, and mesh. Date palm leaf fibers are becoming more and more popular as a way to strengthen composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 40–48 Read article
-
Heat Treatment Research Studies of EN9 Carbon Steel by Quenching Operation in Different Quenching Media
Abstract: In this experimental research, EN9 type of steels is selected to process the heat treatment by quenching to increase the hardenability of a material. EN9 steel is cut into small work samples with diameter 25mm and length 15mm to analyze. Then they are polished the cut surface in a fine manner. Microstructure and hardness are to be found for EN9 work pieces before heat treatment at different locations like at …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 1, Issue 2, 2023 · pp. 1–25 Read article
-
Formulation and Evaluation of Topical Antiacne Gel from Coriander and Garlic Extract
Abstract: Objective: To develop and evaluate a topical anti-acne gel formulated using aqueous extracts of coriander (Coriandrum sativum) and garlic (Allium sativum). The study aims to assess the antibacterial efficacy of the gel against acne-causing bacteria, specifically Propionibacterium acnes. Methods: 1.Extraction: Coriander Extract: Aqueous extraction was performed by soaking coriander seeds in distilled water, followed by filtration. Garlic Extract: Non-chemical extraction involved mixing crushed garlic with honey in a 1:1 ratio …
Published in Research & Reviews: A Journal of Pharmacognosy · Vol. 11, Issue 3, 2024 · pp. 10–15 Read article
-
An Experimental Study on The Effect of Geopolymeric Composite Reinforcement on Soil Subgrade for Flexible Pavements
Abstract: The use of geo-synthetics, such as geotextiles, has the potential to enhance the inherent engineering and geotechnical properties of subgrade soils that exhibit poor conditions. The use of geotextiles in pavement construction has many advantages, including enhanced subgrade strength and the ability to construct flexible pavements that are both efficient and cost-effective since it reduces the pavement thickness. In the realm of flexible pavement system development, the significance of subgrade …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 132–140 Read article