Search
18 articles for “sawdust”
-
Removal of Cadmium from Aqueous Solution by Modified Sawdust as Adsorbent
Abstract: The study was carried out to determine the percentage removal efficiency of heavy metal like cadmium by using the modified form of sawdust as an adsorbent. Cadmium is highly toxic to human, plant and all living organism present in the environment. It was found that the chemically treated sawdust is a better adsorbent as compare to the untreated form of sawdust. After treating the sawdust with sodium hydroxide (NaOH), it …
Published in Emerging Trends in Chemical Engineering · Vol. 2, Issue 2, 2015 · pp. 22–24 Read article
-
Optimum Mixture Proportioning of Sawdust Ash Blended Sand-Stone Dust Blocks Using Scheffe’s Regression Theory
Abstract: This study carried out an experimental investigation on the compressive strength of sawdust ash blended sand-stone dust block of size 450 x 225 x 150 mm using Scheffe’s (5, 2) regression theory. The compressive strength of sawdust ash blended sand-stone dust blocks obtained based on fifteen trial mix ratios were used to develop the mathematical model while the results of the compressive strength values obtained based on the additional fifteen …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 2, 2023 · pp. 33–40 Read article
-
Optimization of Sulphuric Acid Hydrolysis Process for Fermentable Sugars from Lignocellulosic Content of Wood Sawdust for Production of Cellulosic Ethanol
Abstract: The aim of this study was to investigate the optimization of acid hydrolysis process for fermentable sugars from the lignocellulosic content of wood sawdust for cellulosic ethanol production. In this study, four process parameters were investigated; acid concentration (3-7%), solid fraction (8-12ml/gm), temperature (100-120oC) and time (90-150minutes). The total reducing sugar content of hydrolyzed solutions was analyzed using Phenol-Sulfuric Acid method. The result of the statically analysis 2mm particle size …
Published in Emerging Trends in Chemical Engineering · Vol. 7, Issue 1, 2020 · pp. 10–18 Read article
-
An Investigation of Binders for the Production of Biomass Briquettes from Sawdust and Cow Dung Admixture
Abstract: This study explored an investigation on the effect of binders for the production of biomass briquette from saw dust and cow dung admixture for domestic cooking applications. The materials used to investigate the study were sawdust and cow dung was treated, and the sawdust was grind and screened using sieve mesh size into particle size of 2mm. The biomass briquettes were produced by mixing sawdust and cow dung within the …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 2, 2023 · pp. 1–11 Read article
-
Some Properties of Briquettes Produced from Sawdust and Different Binders using a Fabricated Hydraulic Piston Press
Abstract: AbstractThis paper describes a fabricated briquettes hydraulic piston press and some properties of the briquettes produced from sawdust when it was used. The press consists of three basic components: the main frame, the mold and a hydraulic jack fitted with pressure gauge. The parts are readily available in Nigeria and relatively cheap. The piston press was used to produce briquettes at 120 bar compaction pressure using composite sawdust and different …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 2, 2017 · pp. 17–23 Read article
-
Evaluation of Mechanical Properties of Terminalia Chebula and Teak Wood Sawdust Reinforced Polymer Hybrid Composites
Abstract: This study examines the mechanical characteristics of polymer hybrid composites augmented with sawdust from teak wood and Terminalia chebula (Kadukkai). To examine their effects on mechanical performance, the composites were made with different percentages of biofiller (10%, 20%, 30%, 40%, and 50%) while keeping the proportions of the two reinforcements same. Tensile, flexural, and impact tests were performed to assess their strength properties. The findings showed that flexural strength varied …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 469–476 Read article
-
Production of Cellulosic Ethanol from Wood Sawdust by Sulphuric acid Hydrolysis
Abstract: In this study, production of cellulosic ethanol from wood sawdust was investigated. Four experimental parameters were investigated during the hydrolysis and ethanol production. These are particle size (1–3 mm), acid concentration (3–7%), temperature (90–110°C), and time(120–240 min). The total reduced sugar content and ethanol yield was determined. Response surface methodology (RSM) employing the central composite design (CCD) was used to optimize the total reduced sugar and ethanol yield. Cite this …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 30–35 Read article
-
Drying and Particle Size Characteristics of Danta (Nesogordonia papavereria) and Hard Cross (Vitex doniana) Wood Sawdusts at Different Temperatures
Abstract: The drying and particle size characterization of Danta (Nesogordonia papavereria) and Hard Cross (Vitex doniana) hardwood sawdusts were investigated at temperatures 80 ºC, 90 ºC and 105 . The experimental drying data were modeled using eighteen existing drying models. The results showed that the modified Henderson and Pabis model offered the best fit to the drying curves of Danta and Hard Cross sawdusts. The experimental data obtained from the particle …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 1, 2016 · pp. 30–38 Read article
-
Production of Polymer Composite using Thermoplastics, Sharp Sand and Sawdust: Mix Techniques
Abstract: This research work focuses on producing a polymer composite using a thermoplastic. PET is nonbiodegradable and contribute majorly to water and land pollution in this research work an attempt has been made to utilize PET waste plastic in manufacturing fibre-reinforced polymer composite by combining sawdust which is another waste product from woodwork operations and sand, a major component in construction, whose use is greatly threatening the ecosystem. The fibre-reinforced polymers …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 3, 2022 · pp. 21–29 Read article
-
A Preliminary Study on Biopolymerised Concrete with Sawdust as an Admixture
Abstract: In this study bio polymer obtained from Tapioca starch and sawdust in fine form were assessed for the use as partial replacement of cement materials for an application in lightweight concrete. Physical and chemical characteristics of bio polymer and sawdust were analyzed initially. Properties of concrete that has been investigated were compressive, tensile and flexural strength. The cement has been replaced by bio polymer and saw dust accordingly in the …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 2, 2014 · pp. 1–4 Read article
-
Comparative Study on the Growth and Yield of Ganoderma lucidium Mushroom Cultivated on African Peach (Nauclea diderrichii) and Bush Mango (Endospermum medullosum) Sawdust as Substrates
Abstract: This study was conducted to find out which substrate provides for the best artificial development of G. lucidium. Mango (Mangifera indica) leaves were added to the saw dusts of Nauclea diderrichii and Endospermum medullosum, which were both utilized as substrates for growing. The substrates were inoculated with Ganoderma spawn and then exposed and hydrated to start the fruiting process. Three replications of the process were carried out. It was observed …
Published in International Journal of Fungi · Vol. 2, Issue 1, 2025 · pp. 39–45 Read article
-
Characterization and Fabrication of Particle Board from Banana Fiber and Sawdust as A Hybrid Composite
Abstract: The current global landscape emphasizes the search for eco-friendly and regenerative materials. Utilizing environmentally available fibers in conjunction with polymeric resins through efficient manufacturing processes offers a cost-effective solution with high-quality standards. Polymer matrix composites with fiber reinforcements possess several advantages, including low production costs, ease of fabrication, and improved material properties, making them applicable in a wide range of industrial contexts. This paper emphasizes the creation of Particle boards …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 192–200 Read article
-
Synthesis and Characterization of Sustainable, Low-Cost, Biomass-Derived Carbon Films from Hevea Brasiliensis (Rubber) Wood for Environmentally Friendly Gas Sensors with Enhanced Selectivity and Sensitivity to Polar Vapors and Hazardous Gases
Abstract: Hevea brasiliensis (rubber) wood sawdust was utilized to fabricate carbon gas sensors for detecting 1000 ppm of ethanol, methanol, acetone, carbon dioxide, and ammonia gases. The carbon particles were prepared by phosphoric acid impregnation followed by thermal activation and then fabricated into films on conductive and non-conductive substrates using the doctor blade method. X-ray diffraction (XRD) analysis revealed distinct graphitic features with peaks at the (002) and (100) planes, indicating …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 22–36 Read article
-
Performance of Sisal Fiber Concrete Using Fly Ash and Silica Fume Enhancements
Abstract: The construction industry has advanced significantly in constructing innovative structures using diverse materials. Various waste materials such as fly ash, sawdust, and residues of natural fibers have been utilized in the construction industry. Addressing these concerns requires exploring low-cost, environmentally friendly, and sustainable materials. This paper aims to investigate mixing silica fume, fly ash, and sisal fiber into concrete to address waste disposal and global warming issues while creating stronger …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 63–74 Read article
-
Design of Dual Media Water Filter Purifier Using Clay Pot
Abstract: Numerous organisations make low-cost water treatment devices for rural homes, for instance filters, RO and UV-based water purifiers. However, these devices have problems like filter clogging, the need to replace filters frequently water contamination (in the case of RO), and the truth that electricity is not always available in rural areas, which makes them costly to use. Because of this, RO and UV purifiers are too expensive for people who …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 94–99 Read article
-
Preparation of High Density Polyethylene (HDPE) blended Lignocellulosic Composite
Abstract: AbstractHigh density polyethylene (HDPE) blended lignocellulosic bagasse composite are structural materials made from renewable resources. These materials are being researched and developed to replace less eco-friendly structural and non-structural materials used in the construction industry. The lignocellulosic-composites studied have the potential to be used for scaffolding, framework, flooring, walls and for many other applications within buildings, as well as for temporary construction. In this study, high density polyethylene (HDPE) blended …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 1, 2019 · pp. 14–20 Read article
-
Indigenous Technique of Biochar Production and Effect of Biochar Application on the Geotechnical Properties of the Expansive Soils
Abstract: Expansive soils have been a source of risk to human beings as they causes huge economic loss including damage to buildings, roads and other civil infrastructures because of their low compressive strength and excessive settlement characteristics. One of the available options is to replace such soils before starting any civil engineering construction but looking to huge costs involved in replacement; it is generally not practiced nowadays. Another viable alternative is …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 1, 2021 · pp. 50–63 Read article
-
Prediction of Mix Ratios for Grade 30 Superplasticized Concrete Using Osadebe’s Regression Model
Abstract: This study developed a model for estimating the compressive strength of grade 30 super-plasticized concrete. The regression model was built using a total of 15 experimental mix ratios. The results of compressive strength at 28 days from the concrete cubes were used for model development. Two cubes (150 mm × 150 mm × 150 mm) were produced per mix ratio, totaling 30 cubes for the 15 trial mix ratios. Osadebe’s …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 1–10 Read article