Search
29 articles for “pressure ratio”
-
Thermal analysis of sustainable composite material absorption refrigeration system for cold storage application
Abstract: Present study deals with thermal analysis of absorption refrigeration system (ARS) and generator-absorber heat exchanger (GAX) based absorption refrigeration system by using green composite like aqua-ammonia. Evaporator temperature is 0°C for cold storage application, condenser temperature is 50°C as per Indian weather condition, mass stream rate of strong solution through the pump is 1 kg/s, and effectiveness of solution heat exchanger and refrigerant heat exchanger is 0.7 considered for present …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 18–27 Read article
-
Evaluation of Chemical Application as Pilot to Improve Oil Production from High Viscous Oil in Sandstone Reservoir
Abstract: Chemical injection stimulation is one of worldwide proven technologies for viscosity reduction and mobility enhancement. The principle mechanism is to reduce heavy oil viscosity by injecting of active chemical agent solution into reservoir as huff and buff practice, the agent solution is act at near wellbore area by remove plugging of heavy organic material, Energy support due to large quantity of stimulation liquid being injected into the formation, viscosity reduction …
Published in Journal of Petroleum Engineering & Technology Read article
-
Aerodynamic Optimization of UAV Wings Using Machine Learning
Abstract: Unmanned Aerial Vehicles (UAVs) are increasingly deployed across defense, transportation, agriculture, and environmental monitoring, demanding improved aerodynamic efficiency to enhance endurance, stability, and payload capacity. Traditional aerodynamic optimization approaches, relying on computational fluid dynamics (CFD) simulations and wind tunnel experiments, are often time-consuming and computationally expensive. This study proposes a machine learning (ML)-driven framework for the aerodynamic optimization of UAV wing geometries, aiming to significantly reduce design cycles while improving …
Published in International Journal on Drones · Vol. 2, Issue 1, 2026 · pp. 1–7 Read article
-
Recognition of Engine Parameters for Mahua Biodiesel by Analyzing the Performance Using OFAT Approach
Abstract: The review work deals with the prediction of significant engine input parameters by the use of one factor at a time approach. The technique is a trial of experiments by varying only one engine input parameter and others remain at constant values. The various engine input parameters are found from the literature review. In the current work, six engine input parameters are predicted from the past research. These are blending …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 1, Issue 1, 2023 · pp. 1–10 Read article
-
Effect of Steam Flash Explosion Conditions on Preparation of Reed Pulp
Abstract: The effects of different steam explosion conditions on preparation of reed pulp by steam flash explosion were analyzed. Because the main factors affecting steam explosion are steam pressure, retention time and liquid-to-reed ratio, so that the effects of these conditions on the steam explosion pretreated reed straw, and constituent of reed pulp were analyzed. Reed straw samples, 2~3cm in length, were loaded into a 5L stainless steel reactor and treated …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 115–128 Read article
-
CFD Analysis of Double Diffusion Rotating Flow in a Cylindrical Annular MHD Braking System with Joules Heating and Dufour Effects
Abstract: The present study has investigated Joules parameter significance on an axisymmetric whirling flow within a cylindrical annulus, specifically focusing on an MHD braking system. The cylindrical annulus braking system is packed lithium lid liquid (Pr = 0.015), aspect ratio = 2, and imposed to an axial heat and magnetic field. In this study, the modified MAC pressure correction method has been used to solve the mixed convection flow with double …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1448–1462 Read article
-
A Finite Element Analysis to Study the Effect of Hydrostatic Pressure on Steel Ductility
Abstract: The effect of superimposed hydrostatic pressure on percentage reduction of area (a gauge mark of the ductility) is investigated in round steel bars in tensile stress by employing a finite element analysis (FEA) with 8-node serendipity quadrilateral elements and von Mises plasticity flow rule in an elastoplastic power law hardening model. It is demonstrated that a linear relationship exists between the pressure and percentage reduction of area at any given …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 1, 2025 · pp. 41–51 Read article
-
AI-Assisted Optimization of Supersonic Airfoil Shapes Using CFD Coupling
Abstract: This paper presents a novel framework for optimizing supersonic airfoil geometries through integrated artificial intelligence and computational fluid dynamics coupling. Traditional gradient-based optimization methods for high-speed aerodynamic shapes suffer from computational expense and convergence difficulties in non-convex design spaces. The proposed methodology employs a deep neural network surrogate model trained on high-fidelity Reynolds-Averaged Navier-Stokes solutions to approximate aerodynamic performance metrics across the design space. A hybrid particle swarm-genetic algorithm searches …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 1, 2026 Read article
-
Enhanced Heat Transfer in Double Pipe Heat Exchanger with Circular Fins Using Copper Nanofluid and Twisted Tape Inserts: A Computational Study
Abstract: The enhancement of convective heat transfer in a double-pipe heat exchanger utilizing circular finned twisted tape inserts and helical screw-tapes with centre rods, in conjunction with copper oxide nanofluid as the heat transfer medium was studied in this project. Computational Fluid Dynamics (CFD) simulations were conducted across Reynolds numbers ranging from 500 to 5000 to analyse heat transfer characteristics. The investigation focuses on Nusselt number improvement and friction factor analysis …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 11–22 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
Comparative Analysis of Sustainable Materials in Road Construction: A Review
Abstract: The immediate need for sustainable infrastructure has driven research into new materials in road construction with the goal of reducing environmental degradation and enhancing resource efficiency. This review is a comparative analysis of four innovative technologies involving industrial and natural waste products: recycled aggregates from construction and demolition (C&D) waste, feldspar powder from lithium mining, stabilized dam sediments using eucalyptus ash, and calcium carbide residue (CCR) blended with dredged sludge. …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 93–98 Read article
-
Fabrication and Characterization of Hybrid Composites Using Natural Fibers Reinforced in HDPE and Optimization of Injection Moulding Process Parameters to Minimize Shrinkage
Abstract: Materials are crucial for advancing human living standards. Over the past 20 years, composite materials have garnered significant attention owing to their unique properties and applications across various sectors. This study outlines the creation and analysis of a novel series of natural fiber-based composites, which incorporate jute, sisal, and hemp as reinforcements, with high-density polyethylene (HDPE) serving as the matrix, and produced through injection moulding. This study examines the effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 556–585 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Analysis of Die Corner Gap Formation for Strain Hardening Materials in ECAP Through an Upper Bound Sensitivity Approach: A Comparative Study
Abstract: In recent work, using a proposed central composite factorial analysis, the upper-bound theorem's theoretical concept for the equal channel angular pressing process are used. The upper-bound theorem-based theoretical solutions consider Tresca friction conditions and varied fillet radii at the die channel junction. When using AA5083's uniaxial mechanical properties, isotropic nonlinear work hardening is assumed. The ratio of the cumulative effective plastic strain to the time generated by the deformation zones, …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 1–22 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article
-
Performance, Emission, and Combustion Evaluation of Chlorella Vulgaris Biodiesel-Diesel Blends in a Compression Ignition Engine
Abstract: This study examines, without modifying the engine, the performance, emissions, and combustion properties of biodiesel blends made from Chlorella vulgaris microalgae in a four-stroke, single-cylinder, water-cooled CI engine. The blends of biodiesel and diesel, designated B10, B20, B30, and B40, were 10%, 20%, 30%, and 40%, respectively. Of these, B20 showed the best efficiency-to-emissions ratio. Although it recorded the lowest brake specific fuel consumption of 0.232 kg/kWh, indicating superior fuel …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 339–354 Read article
-
Investigation, Fabrication and Testing of Spur Gear Using Composite Material
Abstract: Composite materials constitute one of the favorable, efficacious material zones for tomorrow’s sustainable future through identification of materials with higher strength to weight ratio. A composite material is combination of two or more different materials with varied qualities that work together to create a material that is better than the sum of its parts. Therefore, finding some alternative material for various mechanical applications to accelerate the Indian composite industry is …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 1–8 Read article
-
AI-Assisted Design and Theoretical Aerodynamic Evaluation of a Multistage Conical Diffuser Micro Wind Turbine Fabricated from Polymeric Composites
Abstract: The rising demand for compact, lightweight, and high-efficiency renewable energy systems has accelerated the development of micro wind turbines capable of delivering stable performance under low wind conditions. Traditional bare-rotor micro turbines suffer from limited aerodynamic efficiency, motivating the adoption of diffuser-augmented architectures and advanced polymer-based composite materials. This study presents the AI-assisted conceptual design and theoretical aerodynamic evaluation of a multistage conical diffuser micro wind turbine fabricated using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1111–1118 Read article
-
Importance of inflammatory marker ratio and lipid profile ratio in Acute Ischemic Stroke
Abstract: Background: Acute Ischemic Stroke is a chronic inflammatory disease that is projected to be one of the leading causes of mortality affecting millions of people globally. It is essential to study the Platelet lymphocyte ratio (PLR), Neutrophil lymphocyte ratio (NLR) ratios and C reactive protein (CRP) in impacting the inflammatory status during stroke. It is also important that altered lipid metabolism could influence the inflammatory conditions associated with AIS. Hence …
Published in International Journal of Brain Sciences · Vol. 1, Issue 1, 2024 · pp. 19–31 Read article
-
Development and validation of a method for simulataneous determination of tenovifir disoproxil fumarate emtriculabine and isonized in bulk and pharmaceutical dosage form using RP-HPLC with relevance to toxicological aspects
Abstract: Hence, proposed analytical methods are simple, novel, economical, rapid, sensitive, reproducible and accurate for the Simultaneous estimation of Tenofovir Disoproxil Fumarate, Emtricitabine and Isoniazid in Bulk and Phamaceutical dosage form by using RP- HPLC. This Method gives reliable assay results with short analysis time using mobile phase of Acetonitrile : 0.02M Potassium Dihydrogen Orthophosphate: water (pH 5.3) in the ratio of 60: 25: 15 respectively. Retention time was found to …
Published in Research and Reviews: A Journal of Toxicology · Vol. 14, Issue 1, 2024 · pp. 17–25 Read article