Search
18 articles for “photo catalytic activities”
-
Surface Analysis of Tungsten Doped TiO2 Films and Its Effect on Photocatalytic Degradation of Environmental Pollutants
Abstract: Normal 0 false false false Nanocrystalline TiO2 films, undoped and doped W6+ ions have been prepared on cleaned glass substrate by sol-gel route. Formation of anatase TiO2 phase has been confirmed by XRD analysis of the samples annealed at 550oC for 5 hours. Size of nanocrystals calculated by Debye-Scherrer’s formula and measured by TEM was found to decrease with increase in doping level. Average nanocrystal diameter in undoped sample is …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 1, Issue 1, 2011 · pp. 26–41 Read article
-
Photo-Catalytic Degradation of Rhodamine-B by using UV/TiO2 and Nb2O5 Process: A Kinetic Study
Abstract: The photo-catalytic degradation of Rhodamine-B (RB) in aqueous solution with titanium dioxide (TiO2) and niobium pentaoxide (Nb2O5) as photocatalyst in slurry form has been carried out using UV-A light (254 nm). The effect of various parameters such as catalyst loading, pH and initial concentration of the RB dye on degradation have been determined. An attempt has been made to study the effect of process parameters through concentration of dye, amount …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 3, 2014 · pp. 12–24 Read article
-
Synthesis of Copper Nanoparticles using Alternanthera Sessilis Linn Leaf Aqueous Extract and their Characterization
Abstract: The current study describes the biogenesis of Cu NPs using an aqueous extract of the leaf of Alternanthera sessilisLinn. (A.S). recently, biological synthesis of nanoparticles has gained popularity due to the fact that it is eco-friendly, simple, cost-effective, non-hazardous, and extreme conditions. The aqueous extract of Alternanthera sessilisleaf contains enoughterpenoids, carbohydrates, and flavonoids to convert metal ions into metal and thus stabilize the resulting nanoparticles. The UV-visible spectrophotometer confirmed the …
Published in Journal of Polymer & Composites · Vol. 10, Issue 2, 2022 · pp. 14–28 Read article
-
Magnetic Nanopolymer: Applications and Challenges in Medical Imaging and Theranostics
Abstract: Biopolymers are valuable complex materials. They attract attentions of many scientists, engineers and medical professionals’ for application research. In this research, an assessment of emerging Nanopolymers including magnetic nanopolymer is focused. Hence, sources, magnetic properties, and biomedical application of such polymers are given attention. As ordinary polymers, nano sized biopolymers are visualized as natural and synthetic polymers. However, more emphasis is given to green synthesized magnetic polymer, particularly magnetic Chitosan …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 1, 2025 · pp. 11–21 Read article
-
Improved Photocatalytic Activity for Removal of Methylene Blue Dye from Aqueous Solutions with La2O3-Modified Ceria Heterostructured Binary Oxide Nanocomposite Particles
Abstract: The current study aimed to examine the photocatalytic efficacy of a bimetallic CeO2-La2O3 hetero-NC in comparison to monometallic CeO2 and La2O3 nanoparticles (NPs), utilizing Methylene Blue (MB)as pollutant sample under natural solar and UV irradiation. The coprecipitation method was utilized to produce a bimetallic CeO2-La2O3 hetero-NC. Following this, the nanostructures underwent characterization through various techniques including FT-IR, FE-SEM, XRD, UV Vis- DRS, Raman, and Photoluminescence spectroscopy. The catalytic activity of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 514–532 Read article
-
Recent Advances in Crystal Defect Engineering of Semiconductor Photocatalysts for Sustainable Environmental and Energy Applications
Abstract: Semiconductor photocatalysis has emerged as one of the most promising green technologies for addressing environmental pollution and global energy challenges through solar energy utilization. Nevertheless, the practical application of conventional semiconductor photocatalysts is often limited by their narrow visible-light absorption, rapid recombination of photogenerated electron–hole pairs, insufficient active sites, and poor charge-transfer efficiency. Defect engineering has recently attracted significant attention as an effective strategy to overcome these limitations by deliberately …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 2, 2026 Read article
-
Synthesis and Characterization of Co-Doped ZnO Nanoparticles by Electrochemical Method: Photodegradation Kinetics of Bromophenol Blue Dye, Textile Effluent and Study of Antibacterial Activity
Abstract: ZnO nanoparticles doped with cobalt were synthesized by electrochemical method. The crystal structure and surface morphology were characterized by X-Ray diffraction and Scanning electron microscopy. The optical properties were studied by UV-Vis spectroscopy and from this the band gap energy was found to be 3.17 eV. The XRD data revealed that the crystalline size to be ~21.23 nm. The functional group test was done by FTIR-spectroscopy. SEM results showed the …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 5, Issue 1, 2015 · pp. 1–13 Read article
-
Carbon Dioxide as a Fundamental Component in Sustainable Organic Synthesis
Abstract: A lot of people are interested in carbon dioxide (CO₂) as a cheap, plentiful, and safe source of carbon for making chemical processes more sustainable. Using it as a C1 building block in organic synthesis is a promising way to make products with added value while having less of an impact on the environment. This article examines current advancements in CO₂ fixation into organic compounds, emphasising the creation of effective …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 22–34 Read article
-
Photocatalysis Unveiled: Fundamentals, Mechanisms, and Material Innovations
Abstract: The Industrial Revolution significantly enhanced living standards but also led to severe environmental degradation, making pollution a critical concern for both developed and developing nations. Photocatalysis, a light-driven chemical process, accelerates thermodynamically demanding reactions, such as photosynthesis, offering a promising alternative for deep solar energy storage. This method also minimizes chemical exposure and reduces environmental pollutants generated by industrial activities. A key advantage of photocatalysis is its ability to replace …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 1, 2025 · pp. 08–18 Read article
-
Bio-Inspired Nanostructured Catalysts for CO2 Valorization: Green Chemistry Approaches in Polymer Nanocomposites for Sustainable Energy Solutions
Abstract: Artificial photosynthesis is a pioneering technology inspired by natural photosynthetic processes, offering a sustainable solution to address global energy crises and mitigate environmental impact. By harnessing solar energy, artificial photosynthesis aims to convert carbon dioxide (CO₂) and water into high-energy chemicals, such as methanol and hydrogen, while concurrently reducing harmful greenhouse gas emissions. This innovative process represents a transformative shift toward carbon-neutral or even carbon-negative energy production, helping reduce dependency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 38–46 Read article
-
CuO/TiO2 Nanocomposites: Effect of Calcination on Photocatalytic Hydrogen Production
Abstract: Hydrothermally synthesized TiO2 nanorods were subjected to calcination from 350 to 550 °C and tested their catalytic performance for hydrogen (H2) production in aqueous glycerol solution under solar irradiation. High rate of H2 evolution ca.300 µmol.h−1.g−1cat was recorded with TiO2 nanorods calcined at 500 °C. The nanocomposites were prepared by varying Cu-loading 0.1 to 2.0 wt% and activated at 350 or 500 °C. About 25 folds enhancement in H2 production …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 2, 2014 · pp. 13–20 Read article
-
Crystalline Materials: From Crystal Growth and Defect Engineering to Advanced Functional Applications
Abstract: Crystalline materials form the foundation of numerous modern technologies owing to their highly ordered atomic structures and exceptional physical, chemical, electrical, optical, and mechanical properties. Their periodic crystal lattices provide superior structural stability and enable precise control of electronic, thermal, and optical behavior, making them indispensable in microelectronics, photonics, energy storage, catalysis, aerospace, environmental remediation, and biomedical engineering. Rapid advances in crystal growth techniques, nanotechnology, and computational materials science have …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 2, 2026 · pp. 23–31 Read article
-
A Review on Advancements and Challenges of Catalytic and Non-Catalytic Waste Water Treatment Processes
Abstract: AbstractClean drinking water is a basic amenity to be ensured for all. As water resources are becoming increasingly scarce due to the rising imbalance between freshwater availability and consumption and many of the water resources are polluted by anthropogenic sources such as industrial, agricultural waste and household, therefore, treatment of wastewater remains a critical need before leaving it to natural water streams. Traditional wastewater treatment processes include filtration, adsorption, activated …
Published in Journal of Water Pollution & Purification Research · Vol. 6, Issue 1, 2019 · pp. 24–36 Read article
-
Sustainable Carbon Materials for Catalysis, Energy Conversion, and Environmental Remediation
Abstract: Among the most ancient and adaptable materials used by humans, carbon finds use in a wide range of industries, including electronics, energy production, medicine, water purification, air filtration, and catalysis. Among them, activated carbon's highly developed microporous structure, remarkably large specific surface area, and adjustable surface functions have drawn a great deal of attention from both science and industry. Activated carbon materials have been widely used as molecular sieves, adsorbents …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 47–52 Read article
-
Structure–Optical Property Correlation of Co-Doped TiO₂ and ZnO Nanofillers for Advanced Functional Composite Applications
Abstract: This study investigates the enhancement of the structural and optical properties of titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles through cobalt (Co) doping. Pristine TiO₂ and ZnO are widely studied metal oxides; however, their large band gaps and limited visible-light absorption restrict their performance in optoelectronic, photocatalytic, and environmental applications. Co doping is employed as an effective strategy to overcome these limitations by inducing band-gap narrowing, creating defect-related electronic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1374–1394 Read article
-
Copper Sulfide Semiconducting Nanoparticles for Antibacterial Applications: Synthesis Strategies, Mechanisms and Performance – A Review
Abstract: Copper sulfide nanoparticles (CuS NPs) have drawn growing attention as a next-generation antibacterial platform, owing to their tunable structural, optical, and catalytic properties. This review consolidates current evidence on CuS NP synthesis, mechanisms, and antibacterial performance, comparing chemical and green synthesis routes alongside the effects of morphology, doping, and surface modification. Mechanistically, CuS NPs act through several overlapping pathways, including reactive oxygen species generation, bacterial membrane disruption, ion release, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 236–253 Read article
-
Modern Catalytic Systems: Mechanisms, Materials Engineering, and Sustainable Applications
Abstract: Catalysis is a fundamental pillar of modern chemical science and industrial manufacturing, enabling efficient production of fuels, chemicals, pharmaceuticals, polymers, and environmentally important products through the acceleration of chemical reactions and reduction of activation energy barriers. This review provides a comprehensive overview of contemporary catalytic systems, with emphasis on the relationship between catalyst structure, reaction mechanisms, catalytic performance, and long-term stability. The discussion begins with the classification of homogeneous, heterogeneous, …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 2, 2026 · pp. 01–09 Read article
-
Sonochemical Synthesis and Photo-Catalytic Study of Cd Doped Znse Nanoparticles
Abstract: Cd doped ZnSe nanoparticles have been successfully synthesized with sonochemical process by reacting high purity acetates and sodium selenosulphate at 343 K. The size of nanoparticles was calculated by using powder XRD. It shows the crystalline size ranging between 35.3 nm to 45.44 nm. XRD further shows that ZnSe nanocrystallites are polycrystalline in nature and belong to the hexagonal phase. SEM shows that the particles are spherical in shape. Effect …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 17, Issue 1, 2015 · pp. 32–41 Read article