Search
365 articles for “optical study”
-
Structural and Optical Studies of Baso4:Eu2+ Phosphor Prepared by Co-Precipitation Method
Abstract: Europium doped BaSO4 was prepared by the co-precipitation method and characterization of material was done by using X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR) techniques. From the XRD pattern of Eu doped BaSO4 compound, it was found that the prominent phase formed was BaSO4 and the result of FTIR spectrum of BaSO4:Eu shows that the sulfur-oxygen stretch was found at around 1116 cm-1. The room …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 1, 2017 · pp. 1–9 Read article
-
Spectroscopic and Electrical Studies of Conducting Polyaniline Composites Embedded Nanostructure Zinc Sulfide
Abstract: Simple and low-cost chemical precipitation method was used for the synthesis of ZnS nanoparticles using zinc precursor and DMF as a stabilizing agent. Na2S was used as the source of sulphur ions. Composites of polyaniline and ZnS nanoparticles have been synthesized by in-situ chemical oxidation method by varying weight percentage of synthesized ZnS nanoparticles with aniline monomer. Optical studies in terms of UV-Vis and fluorescence show the positive effect of …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 2, Issue 3, 2012 Read article
-
Studies on Optical and Electrical Properties of Biohybrid Devices
Abstract: We have reported the studies on optical and electrical properties of hybrid devices. The hybrid films were prepared using a layer of natural dye on ZnO thin films. ZnO thin film was fabricated on FTO coated glass substrate using magnetron sputtering. The natural dyes were extracted using aqueous method from basil, pomegranate, and spinach. It is important to control the molecular layers in the formation of hybrid electronic devices. The …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 11, Issue 1, 2021 · pp. 6–15 Read article
-
Performance Study for Optical Half Subtractor Based on SOA
Abstract: AbstractThis article explores for an optical binary half subtractor design which is based on the semiconductor optical amplifiers nonlinear characteristics. For that, the difference output operation of data’s has been realized in the one branch with semiconductor optical amplifier realizing XOR operation and for borrow operation the AND logic operation of the data B with complaint of data A is realized in the other semiconductor optical amplifier branch. Accordingly the …
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 3, 2015 · pp. 50–57 Read article
-
A Study of Optical Sensor in Clinical applications
Abstract: The escalating demand for precise, real-time, and minimally invasive diagnostic and monitoring tools in clinical practice has propelled the development of sophisticated sensor technologies. Among these, optical sensors have emerged as a cornerstone, leveraging the interaction of light with biological matter to translate molecular or cellular events into quantifiable signals. Their inherent advantages – including high sensitivity, specificity, rapid response times, non-ionizing nature, and potential for miniaturization – make them …
Published in International Journal of Optical Innovations & Research · Vol. 3, Issue 2, 2025 · pp. 1–7 Read article
-
A Study on Optical Stethoscope
Abstract: The traditional stethoscope, a staple in medical diagnosis, has remained relatively unchanged since its inception. However, with the advent of cutting-edge technologies, a revolutionary Optical Stethoscope design has emerged, poised to transform the field of medicine. In a breakthrough that promises to transform the medical landscape, a team of innovative engineers and researchers has unveiled the results of their pioneering work on optical stethoscope design. This revolutionary device is set …
Published in International Journal of Optical Innovations & Research · Vol. 3, Issue 2, 2025 · pp. 22–28 Read article
-
Structural and Optical Properties of Nanocomposites of Polyethylene Oxide Embedded with Nano-ZNO
Abstract: Polymer nanocomposites have attracted significant attention in recent years owing to their unique properties and potential applications in a variety of fields. In this study, PEO-ZnO nanocomposites were prepared with different wt.% (5, 10 and 15) nano-ZnO particles incorporated into PEO matrix by a solution casting method. Structural and Optical properties of PEO-ZnO nanocomposites were studied. X-ray diffraction (XRD) studies suggest the incorporation of ZnO NPs into PEO matrix. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 586–600 Read article
-
Poly Vinyl Alcohol/Kaolinite Clay/Grafted Cellulosic Fibre Based Hybrid Composite Films: Physical, Mechanical, Optical and Biodegdrability Studies
Abstract: In this study, physical, mechanical, optical, morphological and biodegdrability properties of poly vinyl alcohol (PVA)/kaolinite clay (KC)/grafted barley husk (GBH) based hybrid composite films were prepared by solution casting method. Barley husk was grafted with oleic acid using graft copolymerization method. The hybrid composite films were characterized by FTIR and SEM. Based on the findings from this work, water uptake of the composite films increased with increase in the amount …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 41–52 Read article
-
A Study on Different Optical OFDM using VLC System
Abstract: AbstractThe main goal of the paper is to preview the work that has already been carried out associated with optical OFDM in the VLC system. Different optical OFDM techniques such as direct-current biased optical OFDM (DCO-OFDM), asymmetrical clipped optical ofdm (ACO-OFDM) and many others are discussed. Nowadays, in conversation systems Visible Light Communication (VLC) plays a major role in the communication field. In the present paper, an overview on transmission …
Published in Trends in Opto-electro & Optical Communication · Vol. 8, Issue 2, 2018 · pp. 13–19 Read article
-
Comparative Study of Structural, Optical, Morphological, and Magnetic Properties of BifeO3 Nanoparticles Synthesized Via Green and Chemical Methods
Abstract: BiFeO3 nanoparticles were synthesized via a green route using Strychnos nux-vomica leaf extract and a conventional chemical sol–gel method to study the effect of synthesis routes on their properties. XRD analysis confirmed phase-pure rhombohedral BiFeO3 for both samples. FTIR analysis was carried out to confirm the formation of the perovskite structure and to detect surface functional groups. FESEM analysis indicated a significant effect of phytochemicals in controlling particle growth and …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 1–8 Read article
-
Morphological, Optical and Structural Studies of Deposited ZnO Films by SILAR Method for Solar Energy Applications
Abstract: The deposited ZnO films were grown on glass substrates using the Successive Ionic Layer Adsorption and Reaction. The morphology of the deposited ZnO is that of flower-like bud.The optical properties were characterized using UV/VIS spectroscopy, the optical band gap decreases with increasing reaction time, and these films have band gap values of 3.19eV, 3.22eV, 3.24eV and 3.25eV. The crystal structure of the films were also characterized using the X-Ray Diffraction …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 4, Issue 3, 2013 · pp. 7–12 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites Read article
-
STUDIES ON MECHANICAL, OPTICAL AND BARRIER PROPERTIES OF LOW DENSITY POLY ETHYLENE WITH MICRO CLAY
Abstract: LDPE (Low density Poly ethylene) was melt blended with micro clay (0.5, 1, 3 & 5 wt%) by using a twin screw compounding extruder. Tubular blown film was taken using a tubular blown film extruder. Mechanical, optical and barrier properties were evaluated. The following trend was observed as the micro clay concentration was increased: The tensile strength was increased by 18% in machine direction (M/D) and decreased by 36% in …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 23–31 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
Performance Study with Grating Based Optical Thermal Sensor
Abstract: AbstractFiber optic sensing technology is one of the emergent technologies in the present digital world exercising for numerous sensing applications. Accordingly sensing and linked measurement is striking field, one of the key functions for the upcoming generation, swiftly hunting for the significant information security issues. Consequently researchers have grown up their concentration. So, in this sight the article presents performance investigation for the thermal optical sensor based on the Fiber …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 1, 2016 · pp. 8–13 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
A Case Study of Free Space Optic Performance Using Simulation Tools – OptSim
Abstract: ABSTRACTFree space optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. A proper understanding of optical signal propagation in different atmospheric conditions has become essential, and thus there arises the need to rationalize the effects of atmospheric channel on terrestrial FSO links. This paper studies …
Published in Trends in Opto-electro & Optical Communication · Vol. 1, Issue 1-3, 2011 · pp. 1–7 Read article
-
Quantum Key Distribution in Optical Fiber Communication: A Study
Abstract: The relentless march of technological advancements, particularly in the realm of quantum computing, stances a noteworthy threat to security of existing cryptographic systems. Traditional encryption methods, like RSA and AES, trust on mathematical problems considered computationally hard for computers. However, sufficiently powerful quantum computers could render these systems vulnerable to attacks, jeopardizing the confidentiality of sensitive data transmitted over optical fiber networks. This looming threat has spurred significant research and …
Published in Trends in Opto-electro & Optical Communication · Vol. 15, Issue 1, 2025 · pp. 30–40 Read article
-
A Comparative Study of Structure, Morphology and Optical Properties of CaAl2O4 Phosphors by Sol–Gel Method
Abstract: In this paper, monoclinic CaAl2O4 phosphor with different weight percentage of aluminium was synthesized by low temperature sol–gel method. The prepared samples were characterized by X-ray diffraction (XRD) analysis, Fourier transform infra red (FTIR), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and photoluminescence emission spectra (PL). The XRD analysis showed that CaAl2O4 have monoclinic structure. The average size of the particles lies between 88 and 109 nm. It was …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 5, Issue 3, 2015 · pp. 1–10 Read article
-
Study on Gain of Semiconductor Optical Amplifier (SOA) with Variation in Current, Wavelength and Power
Abstract: These days Semiconductor Optical Amplifier (SOA) is gaining popularity because of the versatile factor associated with it. It can be used as a gain unit, a modulator, wavelength converter, etc. But before using SOA, the change in gain of SOA with variation in current, wavelength and power should be known. In this paper, these three variations are studied and implemented using Opti System 7 software. Keywords: Semiconductor optical amplifier, Opti …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 1, Issue 2, 2014 · pp. 18–24 Read article