Search
35 articles for “multi band antenna”
-
A CPW Fed Inverted E-Shape Microstrip Patch Antenna for Multi Band Applications
Abstract: In this paper a CPW fed multi band monopole antenna with inverted E-shape micro strip patch is presented for radar/satellite applications. Ansys soft HFSS simulator is used to simulate the antenna in this paper. The proposed antenna consists of inverted E shape patch including finite ground CPW feeding. The antenna is fabricated on 1.5 mm FR4 substrate which has dielectric constant of 4.4 and loss tangent of 0.02. The operating …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 26–35 Read article
-
Design a Rectangular Spiral Microstrip Multi-band Antenna
Abstract: This paper presents a rectangular spiral microstrip antenna operate in multi-band between the frequency ranges of 0.5–5.0 GHz. The proposed rectangular spiral microstrip antenna will be light weight, flexible, slim and compact unit compare with current antenna used in these bands. The paper also presents the detail steps of designing the rectangular spiral microstrip antenna and at different iteration level. This paper is also present how to increase no of …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 15–23 Read article
-
Performance Analysis of Proximity Coupled Microstrip Patch Antenna with DGS and EBG
Abstract: The objective of this paper is to analyze the effect of Defected Ground Structure (DGS) in a Proximity Coupled Microstrip Patch Antenna (PCMA) and the effectiveness of using this structure in a PCMA with an Electromagnetic Bandgap Structure (EBG). The EBG structure used is a metallo-dielectric structure having a printed metallization with connected via ground plane. This manoeuvering of EBG enabled PCMA with a dumbbell shaped DGS results in a …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 1–8 Read article
-
Tri-Band Edge-Cut Rectangular Microstrip Patch Antenna on Composite Substrate for RF Energy Harvesting in IoT Networks
Abstract: The increasing use of Internet of Things devices underscores the pressing need for sustainable energy solutions, since traditional batteries necessitate regular replacement and constrain scalability. Radio frequency energy harvesting is a viable option; nonetheless, antenna design continues to provide a significant problem owing to the requirements for compactness, efficiency, and multi-band functionality. A hybrid composite substrate configuration combining FR4 (εr = 4.3) and RT Duroid (εr = 2.2) is employed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–883 Read article
-
Analysis of a Dual Band Stacked Patch Antenna with Multiple Notches
Abstract: This paper presents the design and analysis of compact dual band stacked microstrip patch antenna for various applications. The designed antenna structure represents the dual frequency band operation and it covers the S band, frequency applications such as Wi-Fi, surface ship radar, weather radar, broadcasting in the range from 2.31GHz to 3.77GHz frequency band, radar, satellite based digital audio radio service (DARS) communication and some communication satellites. The parameters of …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 23–28 Read article
-
Rectangular Patch Monopole Antenna with Different Shaped Multiple Slots for Triple Band Frequency Applications
Abstract: In this paper a rectangular patch microstrip antenna with different shaped multiple slots behaves as a triple band monopole antenna. It is designed for 0.96031–1.0464, 1.3766–1.5797 and 2.1629–2.3708 GHz frequency bands. A rectangular patch monopole antenna with multiple slots, i.e., hexagonal slot and rectangular slot is fabricated on the glass epoxy (FR4 lossy) of dielectric substrate with relative permittivity (εr) of 4.4, thickness of 1.6 mm, loss tangent of 0.02 …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 2, 2014 · pp. 17–24 Read article
-
Advanced 4-Element UWB-MIMO Antenna Design: Achieving High Isolation and Multi-Band Rejection for Advanced Wireless Applications
Abstract: In this study, we present the design, fabrication, and analysis of a step-by-step Ultra-Wideband (UWB) Multi-Input Multi-Output (MIMO) antenna operating from 3 to 14 GHz. The antenna consists of four elements, each characterized by high isolation and equipped with four band-rejection features. These elements are implemented on a Rogers substrate with εr=3. Each antenna element is a modified rectangular patch, incorporating partial ground etching to achieve wider bandwidth. Two sets …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 1, 2025 · pp. 40–62 Read article
-
Design and Analysis of Multi Band Patch with Enhanced Bandwidth
Abstract: In this article, a novel lower edge defected multi-band patch with modified ground structure (or Defected Ground Structure-DGS) with enhanced bandwidth has been presented. The bandwidth can be enhanced by defecting the partial ground and by arc truncation of lower edges of the patch. The antenna was converted into multi-band by defecting the lower corners. The antenna is resonating at multiple bands i.e. 3.7 GHz, 7.87 (~7.9) GHz, 12.19 (~12.2) …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 3, 2020 · pp. 1–8 Read article
-
Microstrip Textile Antenna for S-band Applications
Abstract: In this article, the proposed textile antenna has been studied with better results, high directivity, high gain, good return loss and multiple bands are obtained for wide range of applications in S-band with multiple bands. The substrate material of the proposed antenna is a jean which is a flexible material, the patch and partial ground plane is of copper. There is a modification in proposed textile antenna design with the …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 2, 2017 · pp. 27–31 Read article
-
LTE & 5G NR Carrier Aggregation Network Optimization through Advanced Measurement Configuration
Abstract: The ability to merge numerous frequency carriers—component carriers—to increase transmission bandwidth and throughput speeds over what can be achieved with a single carrier is known as carrier aggregation, and it is a crucial technology in 4G LTE and 5G networks. Cellular devices may attain gigabit data speeds by combining carriers from several frequency bands, such as 600 MHz to mm Wave frequencies, to increase downlink and uplink capacity. This study …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 10, Issue 2, 2023 · pp. 35–45 Read article
-
Exploring Polymer Substrates for CBSIW Antennas: Paper and Denim for Enhanced Gain and Bandwidth
Abstract: This paper presents a novel approach to antenna design by leveraging the unique properties of paper and Denim materials, both of which are polymers. This research underscores the potential of unconventional polymer materials like paper and jeans in antenna design, offering new avenues for the development of lightweight, flexible, and cost-effective communication devices for diverse wireless applications. The study focuses on the design and analysis of non-conventional substrate-based Circular Backed …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 64–80 Read article
-
Design of a Multiband Antenna with Rectangular and Circular Slots for 5G Mobile Technology
Abstract: AbstractThis paper presents a microstrip patch antenna for 5G mobile communication. Requests for mobile communication arise because of rapid growth in mobile users. So, users need more features like high data rate, good communication and reduced traffic on their mobile phones. These requirements can be met using 5G technology. 5G technology offers very high bandwidth, reduced latency, broadband spectrum, improved QoS and a better capacity. 5G operates from 24 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 30–34 Read article
-
Rectangular Patch Antenna with Dual and Triple-band using Complementary Split ring Resonator (CSRR)
Abstract: This paper presents the idea of a Complementary Split Ring Resonator (CSRR)-based multiband microstrip patch antenna. By etching the CSRR in the ground plane of the conventional rectangular patch antenna, several bands are obtained, thereby miniaturizing the conventional antenna. This article examined and contrasted the results of the microstrip antenna with two, four and six CSRR inclusions. Because of the quasi-static resonance properties of the complementary split square resonators, the …
Published in Trends in Electrical Engineering · Vol. 10, Issue 3, 2020 · pp. 1–6 Read article
-
Navigating the Antenna Frontier for Emerging IoT Technologies
Abstract: Internet of Things (IoT) is rapidly transitioning from niche applications to a pervasive, interconnected fabric of intelligent devices, demanding unprecedented levels of performance, reliability, and miniaturization from its constituent components. At the heart of this revolution lies the antenna, the crucial interface between the digital and physical realms. This paper delves into the intricate and evolving landscape of IoT antenna design, specifically addressing the unique challenges and opportunities presented by …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article
-
Co-planar Waveguide Circular Ring Microstrip Patch Antenna for WLAN Applications
Abstract: AbstractA printed circular microstrip patch antenna with a four rectangular shape strip and co planar rectangular ground plane has been proposed. Four rectangles of dimensions 4.8mm x3mm are arranged in such a manner to achieve both the WLAN frequency band. The bandwidths of 341MHz and 414MHz are achieved having a resonant frequency of 2.37GHz and 5.45GHz respectively. This antenna is printed on the glass epoxy (FR4 lossy) of dielectric substrate …
Published in Journal of Communication Engineering & Systems · Vol. 6, Issue 3, 2016 · pp. 1–6 Read article
-
Mitigation of Mobile Radio Parasitic Radiation Effects: A Review
Abstract: ABSTRACT In this paper, mitigation techniques useful for improving mobile radio systems power efficiency and decreasing electro-smog and specific absorption rate (SAR) induction, affecting human head and body, are presented. An analysis of main radiation effects from far field base stations and review of mitigation techniques for enhancing the efficiency of power transmission for mobile radio systems is shown, followed by an investigation of the complex radiation field components from …
Published in Journal of Communication Engineering & Systems · Vol. 2, Issue 1, 2012 · pp. 1–12 Read article
-
Characterization of Dielectric Resonator Antenna (DRA) for Broadband Applications: An Overview
Abstract: This article presents a brief review on realization techniques of broadband spectrum using Dielectric Resonators (DRs). Dielectric materials have attractive features in millimeter (mm) wave regions. In this article, attention has been focused on broadband design techniques using DRAs. The dielectric resonators possessing multi-resonant frequencies have been used for the purpose. These multi-resonant frequencies could be merged together to produce the required broadband spectrum. The primary goal of this review …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 6–14 Read article
-
Wearable Antenna using Foam Substrate for Multiband Application
Abstract: The novel and flexible antenna for modern communication system is studied in this paper. The proposed antenna is compact in size, shows high directivity and large bandwidth. Polystyrene foam material is used as a substrate because such antenna is bendable, wearable, inexpensive, require less attention and having good features like low dielectric constant, low loss tangent and better efficiency. The parameters of antenna such as reflection coefficient, gain, bandwidth, radiation …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 2, 2017 · pp. 23–26 Read article
-
RF Energy Harvesting from Wi-Fi Router in 2.45 GHz ISM Band
Abstract: In this paper, an experimental RF energy harvesting system using rectifying antenna (rectenna) to harvest ambient energy from Wi-Fi at 2.45 GHz is presented. The proposed circuit is a combination of RMPA, followed by a third order stepped impedance low-pass filter, matching network and rectifier using Schottky diode for microwave (RF) to DC conversion. The performance of the rectenna is simulated by electromagnetic simulator computer simulation technology (CST) microwave studio. …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 21–25 Read article
-
Two Port Ring Shaped DRA Based MIMO (Multiple Input Multiple Output) Antenna for WLAN Application
Abstract: This paper presents multiple input and multiple output (MIMO) antenna which is based on dielectric resonator with very good isolation. This antenna consists of two hybrid resonator and is fed by microstrip feedline through H-Shaped aperture is cut in ground plane just below the Ring DR. Area of this antenna is 40x50 mm². Impedance bandwidth (S11<-10dB) of this antenna is 5.15 to 6.15 GHz. The radiation efficiency and total gain …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 7, Issue 1, 2019 · pp. 17–24 Read article