Search
20 articles for “load and resistance factor design”
-
Structural Design of Offshore Structures: A Review of Indian and International Standards
Abstract: Offshore structures—including fixed steel jackets, topside modules, offshore wind turbine support structures, and floating systems—are designed to withstand combined gravity, environmental, seismic, and operational loads under substantial uncertainty and limited access for inspection and repair. Structural design practice has historically relied on internationally recognized standards, particularly the American Petroleum Institute’s API RP 2A, the International Organization for Standardization’s ISO 19900 series, including ISO 19902 for fixed steel structures, and Det …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 13, 2026 · pp. 36–51 Read article
-
Parametric Study of Twin Screw Extrusion for Processing Epoxy/Carbon Black Nanocomposites Using Orthogonal Array Technique
Abstract: AbstractThis paper presents the experimental investigation of the influence of process parameters of twin screw extrusion on the dispersion and electrical, thermal and mechanical properties of epoxy/CB nanocomposites. Four factors, namely, loading level of carbon black (0, 2, 4, 6, 8 and 10 wt%) in epoxy, screw speed (75, 100 and 125 rpm), temperature (5 °, 15 ° and 30 °C) and number of passes (5, 10 and 15) were …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 15–26 Read article
-
Soil Stabilized Road
Abstract: This research examines the suitability of soil-stabilized roadways for light vehicular movement, offering an economical and practical alternative for areas with limited infrastructure development. Stabilizing soil involves improving its engineering properties by incorporating additives such as cement, lime, or other binding materials. Through stabilization, the treated soil can achieve a compressive strength of approximately 5 N/mm², or 500 tonnes per square meter (t/m²), which is sufficient to support loads imposed …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 38–42 Read article
-
Characteristics of Geology in Khulna City Corporation (KCC) Area, Bangladesh
Abstract: This study represents the general characteristics of foundation soil in Khulna City Corporation (KCC) area. The KCC is situated in southwestern part in Bangladesh. Lithologically the area is composed of coarse to very fine silty sand, silt, silty clay, clayey silt and clay in various proportion. The SPT (Standard Penetration Test) value of the investigated area range between 0 and 7 from surface to 8 m deep. Here, the liquid …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 1, 2014 · pp. 39–45 Read article
-
The Quicklift: Redefining Car Jack Dynamics & Design
Abstract: A Jack is a tool that aids in raising the vehicles without considerable physical efforts and thereby reducing strain injuries. This paper is about designed model of Jack and performing the static analysis (viz:structural) with the help of Solid works software. The outcomes obtained demonstrates that jack can be used safely. Additional improvements to be made in the jack is by modifying the vertical cylindrical bar so that it can …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 86–92 Read article
-
DESIGN AND ANALYSIS OF WHEEL RIM
Abstract: Design of wheel rims of the automobiles plays an important role in safety point of view and need more focus in proper designing. Selection of wear and impact resistant materials plays an important role in stability of the wheel rim. The design of wheel rims involves many factors like proper section of material, design shape, supporting ribs etc. It should be strong enough to withstand wear and shock loads at …
Published in Trends in Mechanical Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 1–7 Read article
-
ANALYSIS AND DESIGN OF R.C.C. BRIDGE
Abstract: The thickness of pier is found taking width of deck slab variable, width of girder, depth of girder variable. The thickness of any structure gives flexural rigidity against bending. Span of girder also taken variable. More bending is taken when more loads on the structure & flexural rigidity mainly depends upon thickness of the structure. The design and analysis of R.C.C. bridges involve careful consideration of various factors, including the …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 41–45 Read article
-
Safety of Foundation of Building
Abstract: The design of a building's foundation requires careful consideration of the load intensity applied from the structure above. To ensure stability and safety, the foundation depth must be sufficient to support the loads effectively. For residential buildings, where the loads are relatively lower, a foundation base size of 2.5 × 2.5 meters or 3 × 3 meters is typically adequate. In contrast, for structures with significantly higher loads, such as …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 51–60 Read article
-
Deformation Resistance Evaluation Of High Rise Building Frame Elements With Core Wall As Lateral Load Resisting System
Abstract: As a building's height increases, lateral loads have a significant and quickly impact. The sort of lateral system used in high-rise structures has a significant impact on the manner in which the structure is built, and choosing the right lateral structural system is crucial to the structures reaction. Numerous factors, including the system's structural design, cost, sustainability, and material availability, influence the choice. Structure with core wall system, braced frame …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Evaluation of Tensile Properties of Waste Cornhusk Fibre Reinforced Epoxy Composite
Abstract: Composite materials are generally used in various manufacturing and construction applications around the globe. Properties like lightweight, fatigue resistant, effortlessly moldable makes composites a favorable material for various applications. Composites meet various design requirements with important factor of weight reduction of the part or the product to be manufactured. This lighter materials are nowadays preferred over the conventional materials as they are helpful in absorbing the impact load and vibrations. …
Published in Trends in Machine design · Vol. 7, Issue 2, 2020 · pp. 22–24 Read article
-
Performance Analysis of Bridgeless Converter Based SMPS used for Welding Application
Abstract: Abstract: This paper deals with performance analysis bridgeless converter based switched mode power supply (SMPS) of improved power quality. Power Factor Correction (PFC) based bridge less SMPS having so many applications in the area of welding power supply with IPC. This topology based on the constant voltage output and output current varied according to load changes. In the proposed topology, it is replaced the front end diode bridge rectifier with …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 1, 2019 · pp. 27–33 Read article
-
Structure–Property Correlation of Infill Topology and Density on Tensile and Flexural Performance of FDM-Printed PLA and ABS
Abstract: Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has become a widely adopted manufacturing technology due to its design flexibility, low cost, and capability for rapid prototyping. However, the mechanical performance of FDM-printed components is strongly influenced by internal structural parameters such as infill pattern and infill density, in addition to the intrinsic material behaviour. This study investigates the structure–property relationship between infill topology, density, and mechanical performance of PLA …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 26–37 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Influence of Epoxy-Based Thermally Conductive Polymer Composites on the Thermo-Hydraulic Performance of Finned Helical Coil Heat Exchangers Across Flow Regimes
Abstract: The use of polymer composites in heat exchanger applications has gained increasing attention due to their advantages in weight reduction, corrosion resistance, and design flexibility. However, their relatively low thermal conductivity compared to conventional metallic materials remains a key limitation for efficient heat transfer. In this study, the thermo-hydraulic performance of a finned helical coil heat exchanger is investigated with particular focus on epoxy-based polymer composites reinforced with thermally conductive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 586–602 Read article
-
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments
Abstract: The research work is mainly focused on investigating the effects of wear parameters: filler content (0%, 4% CB, 4% Al2O3,and 2% CB + 2% Al2O3), applied load (4.905, 9.810, 14.710, and 19.62 N), sliding distance (20, 30, 40, and 50 mm) by using Design of Experiments (DOEs) approach. The experimental results were analyzed using MINITAB V16 scientific graphical and data analysis software. Signal-to-Noise (S/N) ratio, analysis of variance (ANOVA) proved …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 21–31 Read article
-
Assessment of Fire Resistance of Offshore Structures under Special Environmental Loads: Emphasizing Structural Integrity and Safety Measures for Extreme Conditions
Abstract: Offshore structures are exposed to a myriad of environmental challenges, including high temperatures and fire hazards, necessitating robust fire resistance measures to ensure structural integrity and the safety of personnel and facilities. This study aims to evaluate the fire resistance of offshore structures under special environmental loads, with a focus on the structural integrity and safety measures in place to withstand extreme conditions. The research methodology includes a comprehensive review …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 1, 2024 · pp. 1–9 Read article
-
The Importance of Safety Engineering in the Design and Assessment of Foundations
Abstract: In safety engineering, ensuring the stability of structures under lateral loads is a critical aspect of foundation design. Lateral forces, such as wind, seismic activity, or other environmental pressures, exert overturning moments on columns, which must be carefully managed to prevent structural failure. To maintain stability, the overturning moment at the foundation base, generated by these lateral loads, must always be less than the restoring moment produced by the soil's …
Published in Journal of Industrial Safety Engineering · Vol. 11, Issue 3, 2024 · pp. 24–29 Read article
-
Comparative Seismic Analysis of Composite Building Frames Considering Wind Pressure per I.S. 875-III: An ETABS-Based Review
Abstract: The seismic analysis of composite building frames, while factoring in wind pressure in accordance with the I.S. 875-III standards, stands as a pivotal imperative. It serves as the linchpin in guaranteeing not only the structural robustness but also the optimal performance of these edifices, ensuring they can withstand the formidable forces of nature with unwavering resilience.This study provides an in-depth and thorough analysis of past research endeavors that have delved …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 3, 2023 · pp. 1–8 Read article
-
Structure–Property-Guided Polymer–Metal Hybrid Design of a Wall Plastering Spray Assembly
Abstract: Wall plastering spray equipment requires a combination of low mass, dimensional stability, abrasion resistance, chemical compatibility with cementitious mortar, and comfortable operator interaction. The original assembly was primarily developed as a metallic mechanical system; however, a polymer-focused material architecture can reduce non-load-bearing mass while retaining a safe metallic pressure path. This study, therefore, presents a structure–property-guided polymer–metal hybrid design in which the pressure housing and nozzle insert remain metallic, whereas …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 197–211 Read article
-
Safety of Structure
Abstract: The thickness of structural components is a vital factor in ensuring their durability and stability under various load conditions. In this study, the material thickness is first determined through the application of bending equations, which are used to analyze regions where bending forces are most significant. The bending stress generated by external loads is considered to calculate the required thickness to prevent failure under such stresses. Additionally, the effect of …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 1, 2025 · pp. 1–11 Read article