Search
25 articles for “linear static”
-
Linear Static and Fatigue Analysis of Nose Landing Gear for Trainer Aircraft
Abstract: The main objective of this paper is to present prototype of aircraft landing gear using CATIA V5 software to study the behavior of landing gear as per actual working condition and to perform structural analysis to study the landing gear behavior for cyclic loading (fatigue loading). Determining the loading modes in the nose landing gear is subjected to static load and cyclic loads which should be taken into account in …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 2, 2014 · pp. 1–10 Read article
-
Analysis and A.I. Modelling of Parameters of Symmetrical Multistory Building using Non-linear Static Analysis
Abstract: Non-linear static analysis (Push over Analysis) is the emerging field in seismic design of structures.The major drawback of elastic analysis is that the response beyond the linear state is neither linearnor simple extrapolation. Although elastic analysis gives a good indication of the elastic capacity ofstructures, but it cannot account for redistribution of forces during progressive yielding of a structurethat follows and to predict its failure mechanism or detect possible location …
Published in Journal of Construction Engineering, Technology & Management · Vol. 11, Issue 1, 2021 · pp. 1–15 Read article
-
Progressive collapse analysis study of rc building:a review
Abstract: The progressive collapse of building is that the collapse of whole building or a part of building in progressive manner thanks to spread of local failure from element to element. thanks to progressive collapse there'll be severe loss of building and lifetime of humanity as progressive collapse happens suddenly. Toavoid the loss got to design a building by proper study and analysis of building for progressive collapse. thanks to earthquake, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 13–19 Read article
-
Seismic Analysis of Vertically Regular and Irregular Building with and without Soft Storey at Different Levels
Abstract: AbstractFor fulfilling functional requirement of community like parking lots, lobbies etc. and increasing unbalance of required area to availability, it is necessary to provide open storeys without brick infill in both types of buildings, that is, in commercial and residential buildings. Open storeys without brick infill, reduce stiffness and also load exhibits higher stress on load carrying members. Present analytical study has been done to find out performance and evaluation …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 3, 2017 · pp. 24–30 Read article
-
Effect of Outriggers Location on Performance of RC Building Subjected to Loss of a Column
Abstract: Progressive collapse denotes a failure of substantial part of the structure, causing greater damage to the structure than the initial impact, which has been initiated by failure of a relatively small part of the structure such as failure of any vertical load carrying elements (typically columns). Failure of large part of any structure will result into substantial loss of human lives and natural resources. Therefore, it is important to prevent …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 65–72 Read article
-
Comparative Seismic Analysis of Multistorey Core in Core Structure Using Beam, Fluid
Abstract: The main objective of this paper is to analyze and study the comparative analysis of multistorey core in core structure with beam, Fluid viscous dampers and bracings using Etabs. Core in core structures, also known as dual core structures, are a structural design concept employed in high-rise buildings to enhance their structural performance and increase resistance to lateral loads such as wind and earthquakes. The concept of core in core …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 212–223 Read article
-
Optimization of steel transmission tower using Firefly algorithm including Wind Load analysis and IS Code checks
Abstract: AbstractTransmission towers have been playing an important role in the power sector. This study isfocused on optimizing the steel transmission towers using firefly algorithm. Metaheuristicshave been widely in use during the recent past. The design of cross sectional areas of themembers is modeled as a continuous variable to determine the optimal values. A newapproach is designed to perform optimization process. This study does not include using ISsteel sections from the …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 3, 2017 · pp. 38–61 Read article
-
Analytical Study of Concrete-encased Steel Column Building against Blast Load
Abstract: Study of behavior of composite building with Concrete-Encased Steel (CES) columns for blast loading is done. This is compared with the behavior of conventional building having reinforced concrete (RC) columns. In the following study, both composite and RC buildings are subjected to 0.1 ton, 0.3 ton and 0.5 ton TNT equivalent charge weight of blast load with a standoff distance of 20 m, 30 m and 40 m. To study …
Published in Journal of Structural Engineering and Management Read article
-
Progressive Collapse Prevention Analysis of Multi-Storeyed Buildings by Using Pushover Analysis
Abstract: AbstractThis paper investigates an actual structure’s potential to break due to progressive collapse. This report looks into the progressive collapse resistance of high-rise RC structures. Progressive collapse of building constructions, primarily concentrates on concrete structures. Progressive collapse of a structure occurs when major structural load carrying members are removed suddenly. A progressive collapse is initiated as a consequence of local structural damages. It produces a chain reaction mechanism, into a …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 3, 2017 · pp. 17–23 Read article
-
COMPARATIVE SEISMIC RESPONSE OF IRREGULAR HIGH-RISE RCC 25 STOREY BUILDINGS WITH AND WITHOUT SHEAR WALLS CONSIDERING P–DELTA EFFECT
Abstract: The seismic performance of high-rise reinforced concrete (RCC) buildings is significantly affected by plan irregularity, lateral stiffness distribution, and second-order (P–Delta) effects. Irregular structural configurations may generate torsional response and increased deformation demand under seismic excitation while geometric nonlinearity further amplifies displacement and internal forces in tall structures . This study presents a comparative seismic assessment of a G+24 storey RCC building having overall plan dimensions of 30,000 mm × …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Response Study of High Rise Building under Wind Load
Abstract: Wind is a phenomenon of great complexity because of the many flow situations arising from the interaction of wind with structures. Wind is of the most significant forces of nature that must be considered in design of buildings. The characteristics of wind-induced loads on buildings continuously vary in temporal and spatial dimensions. Adequate design of buildings depends on the success in predicting the actual effects of turbulent wind forces to …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 35–45 Read article
-
Static and Dynamic performance of RCC framed structure subjected to Geometric and Material non linearity
Abstract: Extensive research in the field of construction materials has led to the manufacture of improved materials and the engineers are familiar with the properties of the materials more than ever before. This has helped to predict the behavior of the structure in its entire intended time of service. Finite element based software can now predict the structural elements that may becritical in due course of time. These analyses are tedious …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 21–26 Read article
-
Reduction of Harmonics for Isolated Diesel Generation System with DSTATCOM Using Fuzzy
Abstract: This paper presents the compensation of reactive power, harmonics, and unbalanced load current of diesel generator set for an isolated system by controlling voltage source convertor (VSC) which is working as distribution static synchronous compensator (DSTATCOM). Here least mean square based adaptive linear element (ADALINE) is use to extract balanced positive sequence real fundamental frequency component of the load current for converter and used to control DSTATCOM. For fast dynamic …
Published in Journal of Automobile Engineering and Applications · Vol. 2, Issue 3, 2015 · pp. 12–22 Read article
-
Comparative Seismic Analysis of Composite Building Frames Considering Wind Pressure per I.S. 875-III: An ETABS-Based Review
Abstract: The seismic analysis of composite building frames, while factoring in wind pressure in accordance with the I.S. 875-III standards, stands as a pivotal imperative. It serves as the linchpin in guaranteeing not only the structural robustness but also the optimal performance of these edifices, ensuring they can withstand the formidable forces of nature with unwavering resilience.This study provides an in-depth and thorough analysis of past research endeavors that have delved …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 3, 2023 · pp. 1–8 Read article
-
A Study On Mems Piezoresistive Pressure Sensor Design And Its Applications
Abstract: Easier and faster means of Pressure measurement is in utmost demand in Industries. MEMS piezoelectric pressure sensors can meet the claim due to its compactness and lightweight. The pressure measurement is purely application specific. The number of steps required to fabricate the MEMs sensor can be condensed if a proper selection of sensor is done. Based on the type of the piezoelectric materials used in the design, the shape of …
Published in Recent Trends in Electronics Communication Systems · Vol. 8, Issue 1, 2021 · pp. 18–23 Read article
-
“FORCE-DISPLACEMENT TRADE OFF” OF RCC BUILDING LOCATED AT VARIOUS SEISMIC ZONES AND SITE CONDITION ADOPTING TIME-HISTORY ANALYSIS
Abstract: Earthquake-resistant or aseismic design are considered to protect buildings to some or greater extent from earthquakes. The force-displacement trade off of structures located in various seismic zones are different in nature depending on intensity of earthquake. No structure can be fully immune to damage from earthquake, the vulnerability can be reduced for safety and durability. The force-displacement behavior of a particular structure can be modified to withstand seismic occurrence preventing …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 14–32 Read article
-
A Suboptimal Nonlinear Duty-cycle Modulation Scheme
Abstract: The DCM (duty-cycle modulation) technique is increasingly used in industrial electronics applications, including instrumentation systems, interfacing drivers and signal transmission chains. However, in existing research works related to new applications of DCM technique, the linear approximation policy is used for the sake of structural simplicity and low implementation cost, at the expends of rigorous analysis and low approximation errors. In this paper, a suboptimal nonlinear DCM scheme is developed. It …
Published in Journal of Electronic Design Technology · Vol. 7, Issue 1, 2016 · pp. 22–31 Read article
-
Semi-Elliptical Load Thick Beam Analysis Using 5th Order Shear Deformation Theory
Abstract: A 5th order shear deformation theory considering transverse shear deformation effect is presented for static flexure analysis of isotropic beams with built in ends. The considered displacement field accounts for non-linear variation of in-plane displacements as well as transverse displacement through the thickness of beam. The condition of zero transverse shear stresses on the top and bottom surface of beam is fulfilled. Governing equations and boundary conditions of the theory …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 3, 2020 · pp. 9–22 Read article
-
Advanced Modeling and Static Analysis of Inverted Umbrella Roof Shell Using ANSYS
Abstract: In this objective paper, an inverted umbrella roof shell are designing and modeling for the static analysis in ANSYS (15) using finite element method. The finite element analysis is carried by using total deformation and normal stresses in longitudinal direction and on X and Y plane to determine, respectively. Responses of umbrella roof shell results are linear and quadratic variation of the membrane displacements in the inverted direction are investigated …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 31–35 Read article
-
Advancements in Robotic Arm Design: Analyzing Gripping and Grasping Mechanisms
Abstract: The main objective of this project is to design and build a child-sized prosthetic hand that can passively adapt to a grasp. The ability of the fingers to adapt to the shape of an object grasped in the hand is known as an adaptive grip. Four fingers and the thumb flex inward and individually adjust to the contour of the object being grabbed as the hand closes around it. When …
Published in Journal of Instrumentation Technology & Innovations · Vol. 13, Issue 1, 2023 · pp. 09–16 Read article