Search
24 articles for “flow separation”
-
Aerodynamic Flow Separation Control Using Active Flow Devices
Abstract: Flow separation remains a significant challenge in aerodynamic applications, often leading to increased drag, loss of lift, and reduced efficiency in air and ground vehicles. This study investigates the use of active flow control (AFC) devices to mitigate flow separation and enhance aerodynamic performance. Active methods such as synthetic jets, plasma actuators, and pulsed blowing are examined for their ability to dynamically manipulate boundary layer behavior and delay or suppress …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–7 Read article
-
Effect of Blunt Truncation in an Aerospike Nozzle
Abstract: Aerospike nozzles are gaining attention as a more advanced alternative to conventional bell nozzles, mainly because they can perform efficiently across a wide range of altitude conditions. Unlike traditional converging–diverging nozzles, aerospike designs naturally adjust to changes in ambient pressure, allowing the exhaust flow to expand more effectively. This results in better thrust performance under varying operating conditions, making them a strong candidate for future aerospace propulsion systems. In this …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Thermal Management of Different Composites Materials Using a Convergent and Straight Vortex Tube
Abstract: The present study focuses on an in-depth and meticulous exploration into the intricate realm of thermal management in three distinct yet widely utilized composite materials—namely, Liquid Crystal Polymer (LCP) Composites, Glass Fiber Reinforced Polymers (GFRPs), and Aramid Fiber Composites (Kevlar). This investigation employs an innovative counter-flow vortex tube system, meticulously analyzing and comparing the thermal efficiency of these materials under different intake configurations. Specifically, two distinct geometrical intake designs—a straight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 252–266 Read article
-
Effect of Leading-Edge Roughness on the Aerodynamic Characteristics of the Wind Turbine blade
Abstract: Leading-Edge Roughness (LER) strongly dictates boundary layer transition and performance degradation on an airfoil operating at transitional Reynolds numbers, an aerodynamic regime where shear-layer stability mechanisms remain highly complex. The wind tunnel experiments were conducted to investigate the aerodynamic impacts of surface roughness applied over 25% of the chord of a NACA 0018 airfoil using two discrete roughness gradations. Surface roughness induces an early boundary layer trip, causing elevated section …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
CFD Analysis: Double Pipe Heat Exchanger, Latent Heat Storage, and BIM-CFD Integration
Abstract: This is a review work covering four research papers. Heat exchangers transport thermal energy across fluids; research in SolidWorks 2014 compared flow simulation to the effectiveness-NTU approach. Slow PCM charging/discharging is a global concern in latent heat storage; research on the influence of flow rate and temperature on melting and solidification durations discovered efficiency in a triple tube heat exchanger design. Advances in computational fluid dynamics for forecasting separated flows …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 2, 2024 · pp. 19–24 Read article
-
A Study of The Performance of surface modified NACA 2416 Airfoils at various Angles of Attach at Re80000
Abstract: This study delves into the aerodynamic effects and characteristics of surface-modified NACA 2416 airfoils, placing a greater emphasis on the aerodynamic efficiency of a two-dimensional surface-modified NACA 2416 airfoil under subsonic flow conditions at Re=80000 and various angles of attack (AOAs). The surface-modified airfoils were crafted using CATIA V5, and simulations were conducted in ANSYS Fluent for angles of attack ranging from 0° to 12°.The CFD results encompass a broad …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 34–39 Read article
-
Hydrodynamic Analysis of Symmetrical Naca Airfoils: A CFD Simulation Approach
Abstract: This study presents a comprehensive numerical investigation of the hydrodynamic characteristics of selected NACA airfoil profiles using advanced computational fluid dynamics (CFD) simulations performed in ANSYS Fluent. The primary objective is to evaluate the fluid–structure interaction behavior of these airfoils when subjected to marine flow conditions relevant to offshore and submerged engineering applications. By modeling the interaction between incompressible fluid flow and various NACA geometries, the study systematically analyzes key …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 31–38 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Short Review on the Flow and Filtration of Polystyrene Microparticles in Micron-Scale Fluid Mechanics towards the Applications related to fluidic Microelectromechanical Systems
Abstract: Maskless lithography, hot embossing lithography and direct bonding technique are useful to fabricate the polymethylmethacrylate (PMMA) microfluidic devices. Also, maskless lithography and indirect bonding technique are useful to fabricate the SU-8 based glass microfluidic devices. In this work, a short review on microfluidic flow and microfluidic filtration of microparticles is provided by author related to the micron-scale fluid mechanics. This review may be useful to perform the blood filtration in …
Published in Journal of Microelectronics and Solid State Devices Read article
-
Sustainable Membrane Fabrication Using Green Chemistry Principles: A Comprehensive Review of Microwave Irradiation, Sonochemical, and Continuous Flow Methodologies
Abstract: Membrane-based separation technologies have emerged as indispensable tools in water purification, biomedical engineering, pharmaceutical processing, and environmental protection. However, conventional membrane fabrication processes often rely on hazardous organic solvents, energy– intensive steps, and environmentally taxing conditions. In response to increasing global emphasis on sustainability and regulatory pressures, green chemistry strategies have gained attention for enabling safer, energy-efficient, and eco-friendly membrane production. This review provides a comprehensive and structured analysis of …
Published in International Journal of Membranes · Vol. 3, Issue 1, 2026 · pp. 8–24 Read article
-
Design Conceptualization and Computational Analysis of Cryogenic Engine Nozzle-ABYOM
Abstract: The main purpose of this paper is to design a cryogenic engine nozzle with specified dimensions using CATIA V5 software and analyze the nozzle using ANSYS software. The realizable k-ε viscous model was used for calculation and the Hydrogen (H2) had retained as an ideal gas. The CFD simulations were done on the nozzle to find the pressure, density, velocity, and temperature. In the graph, there are 500 points streamlined …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Integration of IoT and Robotics for Smart Industrial Waste Management: Design and Implementation of an Automated Collection System
Abstract: All types of drainage issues are resolved by the Automatic Industrial Hazardous and Waste Collecting Machine. Washing, which also encourages blockage-free drains and a constant flow of drain water. Sewage water needs to be separated in the present period due to sufficient sewage to maintain environmental cleanliness. Both humans and the environment are severely harmed by the garbage and pollutants generated by industry and the areas around cities. Using auto …
Published in International Journal of Advanced Control and System Engineering · Vol. 1, Issue 1, 2023 · pp. 26–34 Read article
-
Photochemically Assisted LC–MS Method Development and Validation for Stability-Indicating Determination of Glasdegib in Rat Plasma
Abstract: A simple, precise, and cost-effective LC–MS method was successfully developed for the determination of Glasdegib in rat plasma. The method optimization was carried out by systematically varying key chromatographic parameters, including flow rate, injection volume, analyte concentration, and mobile phase composition, to achieve optimal sensitivity and resolution. A C18 Hypersil BDS column (150 mm × 4.6 mm, 3.5 µm particle size) was used for chromatographic separation, offering effective peak shape …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 1, 2026 · pp. 11–20 Read article
-
Preparation of New Analytical Reagents and Study of Chromatographic Separation
Abstract: There are various types of diagnostic reagents in the laboratory, which involve many specializations in analytical chemistry and detection of pollution levels in river water and environmental pollution, as well as in the preparation of reagents that form as reagents and complexes with elements. Several techniques are shown here in an endless flow, and it is difficult Simply classify them according to a certain principle.; From a methodological point of …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 1, 2024 · pp. 44–58 Read article
-
A Comprehensive Review of Analytical Method – Development and Method Validation of Digoxin Tablets
Abstract: The main objective of this review is to give an outline of the method development and validation process of digoxin, and this review covers the different types of spectroscopic and chromatographic techniques, such as HPLC, UHPLC-Tandem mass spectroscopy, TLC, and LC-MS. A novel method for the determination of digoxin in biological samples has been developed and validated, focusing on improving sensitivity, specificity, and reproducibility. The method was validated in terms …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 1, 2025 · pp. 47–58 Read article
-
Stability-Indicating Rp-Hplc Development and Validation for the Estimation of Lercanidipine Hydrochloride Content in Tablet Dosage Form
Abstract: A sensitive, stability-revealing, and easy reverse-phase high-performance liquid chromatographic (RP-HPLC) technique was developed and rationalized to be in a position to determine Lercanidipine hydrochloride in ingested dosing preparations. It was separated by chromatography on a C 18 column using a mobile phase containing 10 mM potassium dihydrogen phosphate buffer and methanol (20:80, v/v; pH 4.0) at a flow rate of 1.0 mL/min and UV detected at 258 nm. The retention …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 1, 2026 · pp. 17–26 Read article
-
Estimation of Alogliptin and Dapagliflozin in Synthetic Mixture by RP-HPLC Method
Abstract: The primary objective of the proposed research was to develop and validate analytical methods for the simultaneous quantification of Alogliptin and Dapagliflozin in a synthetic mixture. Alogliptin and Dapagliflozin are medications used for managing diabetes, with Alogliptin inhibiting the enzyme Dipeptidyl peptidase-4 and Dapagliflozin belonging to the class of sodium-glucose cotransporter 2 inhibitors. High-performance liquid chromatography method development was conducted using a C18 column (250 mmX4.6 mm, 5 μm particle …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 15, Issue 2, 2024 · pp. 37–46 Read article
-
Bioanalytical Method Development and Validation for the Estimation of Levothyroxine in Human K₃EDTA Plasma by Using UPLC-MS/MS
Abstract: A rapid, sensitive, and highly selective UPLC-MS/MS method was developed and validated for the quantitative estimation of Levothyroxine in human plasma using Levothyroxine-D₃ as the internal standard (IS). Chromatographic separation was achieved on a Gemini NX-C18 column (50 × 3.0 mm, 3 µm) with a mobile phase consisting of acetonitrile and water (70:30, v/v) containing 0.015% formic acid at a flow rate of 0.5 mL/min. The total run time was …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 3, 2025 · pp. 32–46 Read article
-
Recent Advancements in High-Performance Liquid Chromatography: A Comparative Approach
Abstract: Modern separation science relies heavily on chromatography, which is used in all research institutes and pharmaceutical industries all around the globe. Of all the chromatography approaches, HPLC i.e. high performance liquid chromatography is the one that is most frequently used analytically. Recent improvements in chromatographic supports and liquid chromatography (LC) equipment have made rapid and incredibly effective separations possible. This summary emphasizes the key milestones and foundational advances in HPLC …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 40–48 Read article