Search
420 articles for “fabric processing”
-
Comparative Assessment (Qualitative and Quantitative) of Industrial Wastewater from Different Units of Fabric Processing Unit
Abstract: Abstract Water, a natural resource, has been under severe stress due to increased consumption that followed industrialization. There is a greater need to optimize, reuse, recycle and treat the industrial and domestic wastewater as far as possible. In a wet processing industry in India, average consumption of water is about 45–80 liter per kg of fabric. Fabric processing unit of textile industry have varied effluents discharged from its machines that …
Published in Journal of Water Pollution & Purification Research · Vol. 4, Issue 3, 2017 · pp. 1–9 Read article
-
Comparative Investigation on Mechanical Properties of AMCs Fabricated through Liquid and Solid-State Fabrication Process
Abstract: This current research work is primarily focused on comparative experimental study on effect of two distinct fabrication process routes i.e. liquid state and solid state process and their corresponding parameters on microstructure and micro-hardness properties of Aluminium matrix composites (AMCs). In this work, AMCs were fabricated by reinforcing Al2O3 powder materials of 5, 10 and 15 wt.% into pure Aluminum (Al) matrix phase through two distinct processes; liquid state (stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 202–215 Read article
-
Parametric Study of Fused Deposition Modelling Process During Fabrication of Acrylonitrile Butadiene Styrene (ABS) Based Injection Molding Die
Abstract: The purpose of this study is to dictate an optimum process parameter during the fabrication of additively manufactured acrylonitrile butadiene styrene (ABS) based injection mold using fused deposition modelling methodology based additive manufacturing process and to assess the quality of the infection mold by analyzing the surface roughness of the injection mold, and the time taken in the manufacturing of the mold. The ABS PRO+ filament is used in manufacturing …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 Read article
-
TOPSIS-Driven Optimization of FFF Process Parameters for Mechanical Strength Enhancement
Abstract: In this study, the application of the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method for optimizing Fused Filament Fabrication (FFF) process parameters to enhance the tensile and flexural strength of Polylactic Acid (PLA) material-based 3D printed components is explored. This investigation delves into the intricate relationship between key parameters, such as layer height, print speed, infill density, print temperature, and nozzle diameter, and their impact …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 246–255 Read article
-
Fabrication and Optimization of Process Parameters for Friction Stir Welding AA7075+10%wt.SiC Composite by Taugchi Method
Abstract: Aluminium alloy 7075 as matrix and silicon carbide (SiC) as reinforcement has been widely used in aircrafts and space industries because of high strength to weight ratio. Fusion welding of this Aluminium Metal Matrix Composite (MMC) will lead to many problems such as porosity, micro-fissuring and hot cracking. However, friction stir welding (FSW) can be used to weld this MMC without above mentioned defects. Objective of this investigation are fabrication …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 102–112 Read article
-
Polymer Processing in Microfluidics towards the Fabrication of Nanofluidic Systems in Nanotechnology
Abstract: This experimental work reports two individual SU-8 based glass microfluidic devices to be fabricated by maskless lithography along with indirect bonding technique using the steps of SU-8 processing. Dyed water is the selected and prepared working liquid for this work. The CMOS camera is used to record the passive microfluidic flow of dyed water in fabricated devices. In future, this report may be suitable to investigate the nanofluidic flow phenomena …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 11, Issue 2, 2021 · pp. 27–31 Read article
-
Dielectric Studies of 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 Nanoceramic Fabricated by Chemo-mechanical Process
Abstract: The present investigation is aimed toward investigate a straightforward, inexpensive, and environmentally friendly chemo-mechanical method for preparing high-dielectric materials, specifically 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 (BCT-CCTO), by combining metal nitrate combustion with solid TiO2 powder and titanium isopropoxide, Ti (OR)4. The composite was prepared by the mixing of individual materials of Ba0.8Ca0.2TiO3 and CaCu3Ti4O12 through the chemo-mechanical method. Initially, 99% pure Ba (NO3)3, Cu (NO3)2∙3H2O, TiO2 and glycine were taken in their stoichiometry ratios. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–21 Read article
-
Comparison of microstructure and wear property of Al-30Pb alloy composite fabricated by spray forming and casting processes
Abstract: The influence of spray forming of Al-Pb alloy on its micro structure and wear behavior have been investigated. Aluminium alloys with lead 30%wt prepared via two methods viz. Casting and Spray casting process. The Al-Pb alloys are potential substances for bearing mixtures owing to the fact they possess most excellent performance like low price of production, friction properties, excessive non-corrosive effect, and excessive conductivity than different aluminum bearing alloys. Microstructural …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 1, 2019 · pp. 9–15 Read article
-
SUSTAINABLE MEMBRANE FABRICATION USING GREEN CHEMISTRY PRINCIPLES: A COMPREHENSIVE REVIEW OF MICROWAVE IRRADIATION, SONOCHEMICAL, AND CONTINUOUS FLOW METHODOLOGIES
Abstract: Membrane-based separation technologies have emerged as indispensable tools in water purification, biomedical engineering, pharmaceutical processing, and environmental protection. However, conventional membrane fabrication processes often rely on hazardous organic solvents, energy– intensive steps, and environmentally taxing conditions. In response to increasing global emphasis on sustainability and regulatory pressures, green chemistry strategies have gained attention for enabling safer, energy-efficient, and eco-friendly membrane production. This review provides a comprehensive and structured analysis of …
Published in International Journal of Membranes · Vol. 3, Issue 1, 2026 · pp. 8–24 Read article
-
Experimental Investigations on the Durability of PMMA Microfluidic Devices Fabricated by Hot Embossing Lithography with Plasma Processing for Bioengineering Applications
Abstract: In this research paper, total 1290 individual static contact angles of different working liquids have been measured and recorded on the flat polymethylmethacrylate (PMMA) surfaces. Total 474 individual PMMA microfluidic devices have been fabricated by the maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory and mechanical engineering workshop to determine the durability of these microfluidic devices. Total nine individual working liquids have been used to …
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 3, 2016 · pp. 1–18 Read article
-
Tailoring the Compressive Behavior of Tetrachiral Auxetic Structures Through FDM Process-Parameters
Abstract: This research evaluates how fused deposition modeling (FDM) fabrication process parameters affect the compressive behavior of tetrachiral auxetic structures created from Polylactic Acid (PLA). Auxetic materials have several useful properties, including reversible deformation and high-energy absorbing capabilities, which are beneficial to creating ultra-lightweight structural, protective, and shock-resistance designs. Among the available auxetic topologies, the tetrachiral configuration is particularly attractive for engineering use, because its rotation-dominated node–ligament deformation gives a negative …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 58–70 Read article
-
Effect of Process Variables on the Mechanical Characteristics of form Fabricated Materials
Abstract: Additive manufacturing prominent rapidly advancing technologies for producing 3D-printed products. Initially developed by stratasys, FDM technology emerged during the 1980s. This additive manufacturing technique builds products by extruding semi-molten material through a nozzle onto a platform. PLA and ABS are among numerous thermoplastics that are commonly used as filaments in this procedure. Purpose of research was to observe the effect of variables such as infill percentage, bed temperature, printing speed …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 2, 2025 · pp. 32–39 Read article
-
Explainable Machine Learning for Process Parameter Optimization in Gradient 3D-Printed Polymer Composites
Abstract: The explainable machine learning-based structure may be employed to achieve a favorable process parameter of the graduate 3D-printed polymer composite structures to improve the mechanical and thermal properties without compromising the transparency of the decisions made during the fabrication process. Gradient composite specimens were made by systematically varied process parameters like nozzle temperature, raster orientation, deposition speed, gradient transition rate and fused filament fabrication. A predictive model of tensile strength …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 847–866 Read article
-
Design Optimization and Performance Analysis of Autonomous Drone Systems
Abstract: In recent years, drones have become indispensable tools across various industries, thanks to their versatility and wide-ranging applications. The fabrication of drones is a complex process that integrates multiple engineering disciplines, including mechanical design, electrical systems, aerodynamics, and software development. The meticulous design of the drone’s frame, taking into account factors such as weight, durability, and aerodynamic efficiency, marks the commencement of the fabrication process. The paper presented a comprehensive …
Published in Journal of Aerospace Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 21–30 Read article
-
Development and Analysis of General-Purpose Drone
Abstract: In recent years, drones have become indispensable tools across various industries, thanks to their versatility and wide-ranging applications. The fabrication of drones is a complex process that integrates multiple engineering disciplines, including mechanical design, electrical systems, aerodynamics, and software development. The meticulous design of the drone's frame, taking into account factors such as weight, durability, and aerodynamic efficiency, marks the commencement of the fabrication process. The paper presented a comprehensive …
Published in Journal of Aerospace Engineering & Technology Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Design and Characterization of High-Performance Polymer Nanocomposites for Aerospace Applications
Abstract: Polymer nanocomposites have revolutionized aerospace materials through mechanical strength, thermal stability, and lightness. A number of polymer matrices filled with nanofillers such as carbon nanotubes, graphene, and nanoclay considerably improved structural integrity, flame resistance, and environmental adaptability. However, fabrication techniques are still being optimized so that nanofillers are properly dispersed throughout, which may create contradictions between mechanical strength and process ability. This work tries to design and characterize high- performance …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 178–193 Read article
-
Process Parameter Optimization of Magnesium Alloy Material Welded by Friction Stir Welding Using UTM and Taghuchi Approach
Abstract: Welding is a fabrication process where materials are fused together which may similar or dissimilar according to requirement. Welding is a systematic approach where dissimilar and similar materials are welded with an application of heat. Friction stir welding (FSW) is a welding method where metals are converting to a molten phase and with a desirable application of pressure leads to metal joining. FSW is a metal joining process used in …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 381–392 Read article
-
FABRICATION AND COMPRESSIVE TEST ANALYSIS OF CARBON FIBRE REINFORCED NYLON
Abstract: AbstractThe aim of the paper is to study and investigate the effect of carbon fibers (T800), epoxy resin and hardener Tri Ethylene Tetra Amine (TETA) reinforced with nylon rod. There is a wrapping of carbon fiber done on the nylon rod which increases the compressive strength. It is found that compressive strength very with respect to variation of wrapping around nylon rod. The density of final material reduces as the …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 3, 2019 · pp. 28–32 Read article
-
DESIGN AND MANUFACTURING OF MARINE PROPELLER
Abstract: The present work is aimed at the fabrication of propeller blade using Aluminium-24345 material. It is high corrosive resistant, light in weight and easy to maintain. A propeller has a complex geometry and requires high end modelling in its software. The solid model of propeller blade is developed in CATIA V5 R20. By using this model, propeller was manufactured using CNC machine. CNC machining is one of the rapid manufacturing …
Published in Trends in Machine design · Vol. 4, Issue 3, 2017 · pp. 26–37 Read article