Search
21 articles for “enthalpy”
-
Excess Enthalpy of Mixing for Binary and Ternary System – A Review
Abstract: The thermodynamic properties of the mixtures containing hydrocarbon and ether are of significant attention in view of the fact that ethers are used as oxygenating agents in gasoline blending technology. Several oxygenated compounds are added to gasoline to enhance the octane number and to reduce air pollution. Excess enthalpy of mixing data of both binary and ternary system can be obtained by using various equipment and experimental procedures are reviewed. …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 1, 2014 · pp. 57–69 Read article
-
Performance Simulation of Ground Source Heat Pump System based on Low Enthalpy Geothermal Systems
Abstract: Geothermal energy is a clean and sustainable source of energy, which can be used to reduce individual carbon footprints of buildings and make environment pollutant free. This paper gives the idea of implementation and simulation of ground source heat pump (GSHP) system operating with a low enthalpy geothermal resource, which can be utilized for space heating and cooling in industrial and domestic applications. Simulation study is carried out taking various …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 1, 2017 · pp. 29–39 Read article
-
Selection of Working Fluid for Organic Rankine Cycle by Energy and Exergy, For Low Temperature Low Enthalpy Dholera Geothermal Reservoir
Abstract: In today’s scenario of increasing energy demand, it is high time to give emphasis on renewable energy sources. The conventional energy sources that humanity is depending upon today are not only depleting, but also cause significant environmental impact. The burning of coal and fossil fuels causes serious air pollution and several major cities are already under deep threat due to the increasing amount of pollution. Future predictions show an exponential …
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 2, 2016 · pp. 1–10 Read article
-
The thermodynamic studies of 6-(4-chlorophenyl)-1, 2, 3, 4-tetrahydro-2,4-dioxopyrimidine-5-carbonitrile in 60% DMSO in the temperature range 298 to 313 K
Abstract: Densities and viscosities of 6-(4-chlorophenyl)-1, 2, 3, 4-tetrahydro-2,4-dioxopyrimidine-5-carbonitrile have been measured at different concentration in 60% dimethyl sulphoxide (DMSO) in the temperature range 298 to 313 K. The John-Dole equation was used to determine the viscosity. Gibb’s free energy (∆G), entropy change (∆S) and enthalpy change (∆H) were evaluated from relative viscosity . The negative sign of ∆G and ∆H and positive sign of ∆S indicates the spontaneity of reaction …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 78–81 Read article
-
Thermal Stress Analysis of Neck Tube into Vertical Cryogenic Insulated Cylinders using ANSYS Software: A Review
Abstract: Materials have a significant impact on the progress of one discipline, cryogenics. Technologies based on cryogenics are used in many different fields, including metallurgy, chemistry, the electricity sector, medicine, rocket propulsion, space simulation, food processing via refrigeration, and many more. The current status of research and anticipated advancements in the field of cryogenic materials throughout the coming century cover a wide range of topics. We quickly review the background of …
Published in Journal of Thermal Engineering and Applications · Vol. 10, Issue 1, 2023 · pp. 26–30 Read article
-
Evaluating the Influence of Temperature on the Efficacy of Capparis Decidua Extract as a Corrosion Inhibitor for Aluminium in Acidic Media
Abstract: The study investigates the anti-corrosive properties of the ethanolic extract of Capparis decidua fruit on aluminum corrosion in a 2N HCl acid solution, using a weight loss technique at temperatures ranging from 303 to 343 K. At a concentration of 0.45%, the inhibition efficiency (η%) is notably high, reaching 63.15% at 303 K. The inhibitor's adsorption behavior on the aluminum surface is consistent with the Langmuir adsorption isotherm, suggesting that …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 3, 2024 · pp. 58–65 Read article
-
Polymer Phase Change Materials: Innovations, Applications, and Future Directions
Abstract: Polymer-based phase change materials represent a significant advancement in energy storage and thermal management technologies due to their ability to absorb, store, and release heat during phase transitions. This article reviews recent innovations in polymer phase change materials, focusing on the synthesis, characterization, and performance enhancement techniques. The development of polymer composites with enhanced thermal conductivity, improved phase change enthalpy, and extended thermal cycling stability is discussed. Additionally, the integration …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 2, 2024 · pp. 1–7 Read article
-
Corrosion and Corrosion Protection of Unio in Carbonic Acid Medium
Abstract: Unio is a calciferous animal, and its outer surface is made of calcium carbonate. It usually happens in sources of sweet water. They create carbonic acid by absorbing carbon dioxide. It changes the pH of sweet water sources thus water becomes acidic. It develops corrosive environment for Unio. Carbonic acid interacts with Unio to form corrosion cells on the interface of Unio. This acid oxidizes calcium carbonate into calcium ions …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 1, 2025 · pp. 22–31 Read article
-
Corrosion and Corrosion Protection of Cast iron due to Bio-organism
Abstract: Cast iron is a high tensile strength metal. It is generally used for making tools, pipe fitting, electrical fitting equipment and rail track. It interacts with corrosive substances to develop electrochemical cell on their interface. Corrosive substances are acids, bases, salts, bio-wastes, particulates and pollutants. These substances produce hostile medium for materials. These harmful wastes discharge by industries, households, agricultural, urbanization, development of infrastructure, construction works, thermal power stations, hydropower, …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 105–114 Read article
-
Polymer–Gel Composite Phase Change Materials: A Functional Polymer Composite Approach for Solar-Thermal Energy Storage in Building Facades
Abstract: This study investigates polymer–composite phase change materials (PCMs) in the form of polymer–gel hybrids as multifunctional systems for solar–thermal energy storage in building façades. Paraffin- and PEG-based PCMs were embedded into polyurethane and acrylic gel matrices to create shape-stabilized polymer–composites with high PCM loading (70–80 wt%). Differential Scanning Calorimetry (DSC) confirmed distinct melting/freezing transitions at ~56°C (paraffin) and ~42°C (PEG), with enthalpy values of 120–150 J/g, closely matching theoretical predictions, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 36–51 Read article
-
Polymeric Coating Applied for Corrosion Protection of Mild Steel in Corrosive Medium
Abstract: Mild steel is coated with a polymer layer of polybutadiene for protection. However, this coating does not effectively safeguard the metal in environments containing moisture, sulphur dioxide, or chloride. These pollutants interact with the polybutadiene-coated surface, creating a highly corrosive atmosphere. Moisture condenses on the coated metal surface and absorbs sulphur dioxide, forming sulphuric acid. This acid initiates both chemical and electrochemical reactions with the polymer-coated metal, accelerating the corrosion …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 49–53 Read article
-
Analysis of Ageing and Degradation Behavior of Polyamide-12 for Sustainable Additive Manufacturing
Abstract: Additive Manufacturing (AM), particularly High-Speed Sintering (HSS), has emerged as a transformative technology capable of producing complex thermoplastic parts with high efficiency and minimal material waste. The HSS process involves selective deposition of radiation-absorbing ink followed by infrared heating to consolidate polymer powders-most commonly polyamide-12 (PA12). While PA12 is widely used due to its excellent thermal stability and mechanical properties, the sustainability of HSS strongly depends on the reuse of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 136–154 Read article
-
Effect of Gamma and Electron Beam Irradiations on Crystalline and Gelatinization Properties of Edible Potato Starch
Abstract: Exposure of food material to radiation causes changes in crystalline (damage of crystal structure / lattice distortion), and gelatinization (digestive)properties. Potato starch (PS) is one of the important globally used food supplement in different forms like chips, curries, cusins etc. During its use the PS is exposed to radiations, altering its molecular structure (due to chain cleavages) and bring changes in structural and physical properties ; sometimes ill – effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 113–127 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
A Survey on Hydrogen Storage System using Composite Material and its Alloys
Abstract: The transition to a carbon-neutral energy landscape hinges on the ability to store hydrogen safely, densely, and reversibly. While high-pressure tanks and cryogenic vessels dominate today’s infrastructure, solid-state storage in metallic alloys offers a compelling alternative by combining high gravimetric capacity with intrinsic safety to form a composite material. This work presents a systematic investigation of a family of reversible hydrogen-absorbing composite material alloys—principally Mg-based intermetallics (Mg₂Ni, MgFeMn) and TiV-based …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 28, Issue 2, 2025 · pp. 35–42 Read article
-
Process Plant Simulations Using MATLAB
Abstract: This paper explains the systematic procedure to perform steady state process simulations of process plants using MATLAB. This procedure is illustrated with ethylacetate production process. Sequential modular approach is used to solve the material and enthalpy balance calculations in the flowsheet. Phase equilibrium behaviour plots and sensitivity analysis plots are drawn using MATLAB. Results obtained are compared with the ASPEN PLUS V8.8 simulation results.
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 2, 2016 · pp. 42–48 Read article
-
Drum-Boiler Dynamics and its Water Level Control
Abstract: Boilers used for continuous steam generation on large scale. Controlling aspect in boiler process is highly difficult as the system is complex and exhibit nonlinearity, the dynamics of boiler varies with load and multivariable dependent. The main cause of instability in boiler operation is due to the integration effect in it. In addition to that, boilers are normally used where there is sudden load variation without prior knowledge. In this …
Published in Journal of Control & Instrumentation · Vol. 9, Issue 1, 2018 · pp. 10–16 Read article
-
Dodecahedron Methane Hydrate Cage Structure – An Ab initio Study
Abstract: Comparative study of 512clathrate hydrate cage having different numbers of methane guest molecules encapsulation is carried out by calculating interaction energy, encapsulation energy and thermo-chemical stability parameters using density functional theory-based calculation with B3LYP functional and 6-31G(d) basis set. Nuclear magnetic resonance spectroscopy(NMR), Infrared spectroscopy (IR spectroscopy) and Raman spectroscopy of empty and methane encapsulated 512clathrate hydrate cages, change in Gibbs free energy and methane hydrate formation enthalpy are predicted …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 51–64 Read article
-
Effect of Temperature on Inhibitory Efficacy of Tamarindus indica fruit extract on acid corrosion of Aluminium
Abstract: An attempt has been made to investigate the anti-corrosive propensity of ethanolic extract of Tamarindus indica fruit at elevated temperature between 303 to 343 K, so as to replace the exploitation of toxic chemicals as corrosion inhibitors. Inhibition efficiency has been observed significantly high (84.06%) at room temperature at concentration 0.45 %. The inhibition efficiency is found to increase with increasing concentration of extract and decrease with rise in temperature. …
Published in Recent Trends in Fluid Mechanics · Vol. 10, Issue 3, 2023 · pp. 42–50 Read article
-
Heavy Metals Removal by Adsorption Using Aloe barbadensis Miller Leaves Residue Powder for More Sustainable Environment
Abstract: Aloe barbadensis Miller residue from herbal wastes has often proved to be effective in the removal of heavy metals from industrial wastewaters. This study was focused on the adsorption of lead using A.barbadensis Miller residue. The initial concentration of lead ions was varied and the influence of contact time, adsorbent dosage, pH and initial metal concentration on adsorption process were studied. The temperature and agitation speed were kept constant at …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 9, Issue 1, 2019 · pp. 92–98 Read article