Search
144 articles for “degradation rate”
-
Performance and Degradation Analysis of PolyCrystalline PV Modules Installed in Tropical Conditions
Abstract: In this paper, practical field performance of poly-crystalline solar photovoltaic (PV) modules, which were installed at rooftop of the department of electrical engineering BVRIT, has been studied and the correlation between efficiency, temperature and degradation rate of modules as per STC conditions has been presented. The nominal output power of the PV module considered for the study is 240 Wp and the panel is compressed of 60 cells in a …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 4, Issue 3, 2016 · pp. 5–10 Read article
-
A Study on the Influence of Cashew and Pawpaw Leaf on Soil Density Treatment of Contaminated Swampy and Clay Soils
Abstract: Soil density is a key parameter in assessing soil health and structure, often employed as a potential index in bioremediation studies. This study investigates the impact of bioremediation treatments using Cashew Leaf (Anacardium occidentale) and Pawpaw Leaf (Carica papaya) on the density of swampy and clay soils over time. The results show that both treatments, in varying quantities, influence the soil's density by reducing the post-contamination density to levels closer …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 1–9 Read article
-
Comparative Study of Biodegradation of Hydrocarbons in Soils under Nipa Palm (Nypa fruticans Wurmb) Treatment
Abstract: This study evaluated the potential of Nipa palm (Nypa fruticans) powder as an alternative amendment for remediation of crude oil polluted loamy and sandy soils. Further, the study investigated the bioremediation process using the first-order degradation rate and quadratic models. From the analysis, there were changes in the physicochemical properties of the soils under the Nipa palm powder amendment during the remediation. Also, TPH reduction in the amended soil samples …
Published in Research & Reviews : Journal of Ecology · Vol. 9, Issue 3, 2020 · pp. 20–32 Read article
-
The Impact of Bacteria and Biostimulants on Crude Oil Breakdown in Loamy Soil
Abstract: This study investigates the influence of bacteria and biostimulants—specifically Bryophyllum pinnatum leaves soaked in both water and ethanol—on the degradation of crude oil in loamy soil. A laboratory-scale bioremediation setup was employed using a batch reactor model and first-order degradation kinetics to assess total petroleum hydrocarbon (TPH) breakdown under controlled conditions. Various analytical tools and procedures, including gas chromatography (Agilent 6890) and microbial media such as nutrient agar and mineral …
Published in International Journal of Pollution: Prevention & Control · Vol. 3, Issue 2, 2025 · pp. 15–22 Read article
-
Study on the Degradation of Total Petroleum Hydrocarbon (TPH) by Water Hyacinth Co-composts
Abstract: AbstractThis study was carried out to investigate the rate of total petroleum hydrocarbon (TPH) by water hyacinth co-compost at the Teaching and Research Farm, Faculty of Agriculture, Delta State University (DELSU), Asaba Campus. Five (5) kg of soils was collected from the school farm and measured into eighty-four (84) experimental pots and the treatments were arranged in 4×7 factorial experiment in a completely randomized design replicated three (03) times. The …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 8, Issue 3, 2019 · pp. 20–26 Read article
-
Potential of the Biokinetic Integrity of Chromolaena Odorata leaf as Bio-stimulant for Petroleum Hydrocarbon Remediation in Soil
Abstract: The biokenitic parameters of each TPH degradation in the various reactors set-up was determined in terms specific rate of TPH degradation, maximum specific rate of TPH degradation and the equilibrium or dissociation constants as well as the rate of TPH degradation (-kd) or the decay rate of TPH. The value of -kd is within the range of -0.0551 to -0.0151 for room dried and -0.0447 to 0.0118 for sundried whereas …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 47–75 Read article
-
Bioremediation Potential: Discovering Naphthalene-Degrading Microbes in Iraqi Contaminated Soil
Abstract: A polycyclic aromatic hydrocarbon, napthalene is an environmental contaminant with a slow rate of disintegration. Biological treatment by microbes present in contaminated places is the most important of the several approaches applied to remove it from the environment. At depths of 5 to 10 cm, soil samples were collected from areas polluted by oil near the Al-Dora and Sheikh Omar refineries. Nutrient agar was cultured with 0.1 ml of each …
Published in International Journal of Pathogens · Vol. 1, Issue 2, 2024 · pp. 32–41 Read article
-
Investigation of High reliable electric vehicles drive with fast charging system
Abstract: Per capita, India has the world's biggest battery electric vehicle market. For the last several years, there has been a lot of discussion about the challenges and prospects of integrating electric vehicles (EV) with an electric grid. A battery model of an EV should have suitable control mechanisms to interact with an electric grid. The growth of and accessibility of fast-charging technology is one of the many technological concerns being …
Published in Trends in Electrical Engineering · Vol. 15, Issue 1, 2025 · pp. 44–50 Read article
-
Use of Molybdenum Doped Titanium Dioxide as Nanophotocatalyst in the Degradation of Methylene Blue under Visible Light
Abstract: The Earth is facing environmental pollution in its different facets, out of which water pollution is a major problem. Photocatalysis, which is an important part of advanced oxidation processes, is such a technology, which will be beneficial for waste water treatment due to its green chemical nature. In the present work, the photocatalytic degradation of methylene blue (MB) was carried in the presence of molybdenum doped titania nanophotocatalyst and progress …
Published in Journal of Water Pollution & Purification Research · Vol. 2, Issue 2, 2015 · pp. 23–28 Read article
-
Model to Predict the Non-Competitive Inhibition of Petroleum Hydrocarbon Degradation
Abstract: This investigation involves the development of model to predict the non-competitive inhibition of petroleum hydrocarbon degradation. The result of the model shows the relation between the substrates concentration (hydrocarbon) with time. It was observed that at a very small rate the substrate decrease upon the act of the inhibitor. The non-inhibitor is such that it influences the growth rate of the enzymes substrate formation but attacking not necessarily the active …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 1–6 Read article
-
Investigation on the Periodic Dispersion of TPH in Stagnant Water Environment
Abstract: An investigation was carried out on the dispersion of crude oil in stagnant water environment and studied experimentally using relevant mathematical models. Precisely two tanks of equal capacity were filled to about 1.5m3 volumes of fresh water and salt water respectively. Also, we considered TPH diffusion in the stagnant water environment which was studied using Developed Dispersion and Degradation Model incorporated with first order degradation rate as well as the …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 14, Issue 1, 2023 · pp. 73–77 Read article
-
Photo-Catalytic Degradation of Rhodamine-B by using UV/TiO2 and Nb2O5 Process: A Kinetic Study
Abstract: The photo-catalytic degradation of Rhodamine-B (RB) in aqueous solution with titanium dioxide (TiO2) and niobium pentaoxide (Nb2O5) as photocatalyst in slurry form has been carried out using UV-A light (254 nm). The effect of various parameters such as catalyst loading, pH and initial concentration of the RB dye on degradation have been determined. An attempt has been made to study the effect of process parameters through concentration of dye, amount …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 3, 2014 · pp. 12–24 Read article
-
Study on the Variations in Physicochemical Property Concentration in a Contaminated Fresh and Salt Water
Abstract: In this research, the dispersion of crude oil contaminated was subjected into laboratory observations and results were recorded. These results were used to develop and adopt mathematical models for a proper engineering experimental practice. 1.5m3 volumes of fresh water and salt water were filled in two tanks of equal fit at the same intervals along the tanks and depth, where samples were collected for the purpose of analysis of physicochemical …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 1–9 Read article
-
Stability-Indicating Rp-Hplc Development and Validation for the Estimation of Lercanidipine Hydrochloride Content in Tablet Dosage Form
Abstract: A sensitive, stability-revealing, and easy reverse-phase high-performance liquid chromatographic (RP-HPLC) technique was developed and rationalized to be in a position to determine Lercanidipine hydrochloride in ingested dosing preparations. It was separated by chromatography on a C 18 column using a mobile phase containing 10 mM potassium dihydrogen phosphate buffer and methanol (20:80, v/v; pH 4.0) at a flow rate of 1.0 mL/min and UV detected at 258 nm. The retention …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 1, 2026 · pp. 17–26 Read article
-
Application of Monod and Finite Element Models for Groundwater Cleanup in the Niger Delta Area of Nigeria
Abstract: The Niger Delta region of Nigeria, known for its rich biodiversity and extensive oil and gas exploration activities, faces significant environmental degradation, including groundwater contamination. This study investigates the application of Monod kinetics and Finite Element Models (FEM) in the cleanup of groundwater contamination in the Niger Delta. Specifically, the research integrates Monod models to understand microbial degradation rates in contaminated aquifers and FEM to simulate the groundwater flow and …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 1, 2025 · pp. 39–47 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Bismuth-Doped CuGaS₂ Thin Films for Enhanced Photovoltaic and Electrocatalytic Performance
Abstract: This study presents the development and application of bismuth (Bi)-doped CuGaS₂ thin films for enhanced performance in photovoltaic and electrocatalytic systems. Using a cost-effective all-solution processing method, Bi-doped CuGaS₂ chalcopyrite nanocrystals were synthesized and spray-deposited onto molybdenum substrates. The resulting films, with a thickness of approximately 730 nm and grain sizes larger than 400 nm, exhibited superior optical properties and a lower band gap compared to undoped films, making them …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 01–07 Read article
-
Polymer Chemistry in Biomedical Applications: Advances and Innovations
Abstract: Polymers have revolutionized biomedical sciences by playing a crucial role in medical devices, drug delivery systems, and tissue engineering. It is important to note that their unique combination of biocompatibility, mechanical strength, and chemical versatility makes them essential for applications such as implants, prosthetics, and diagnostic tools. Biomedical polymers are categorized into natural types (e.g., collagen, chitosan) and synthetic variants (e.g., polyethylene glycol, polylactic acid), each offering distinct benefits depending …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 Read article
-
Predictive Modeling of Polymer Composites for Medical Implants Using Artificial Intelligence Techniques
Abstract: The use of polymers in biomaterials was now key to designing the next generation of medical implants, which need to be strong and also compatible with living tissue. Tests for biocompatibility, such as those done in the laboratory and by doing experiments on animals, require much time and many resources, so the need for computer-based approaches becomes clear. An artificial intelligence approach was provided in this study to determine how …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 665–692 Read article