Search
54 articles for “carbonic acid”
-
Corrosion and Corrosion Protection of Unio in Carbonic Acid Medium
Abstract: Unio is a calciferous animal, and its outer surface is made of calcium carbonate. It usually happens in sources of sweet water. They create carbonic acid by absorbing carbon dioxide. It changes the pH of sweet water sources thus water becomes acidic. It develops corrosive environment for Unio. Carbonic acid interacts with Unio to form corrosion cells on the interface of Unio. This acid oxidizes calcium carbonate into calcium ions …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 1, 2025 · pp. 22–31 Read article
-
Experimental Investigation on Strength and Durability Properties of Slag Based Alkali Activated Concrete Incorporating Fly Ash
Abstract: To minimize carbon emissions during cement production and to resolve landfill issues arising from industrial waste, the adoption of alkali-activated concrete (AAC) incorporating various by-products from industry has become increasingly popular as environmentally friendly option to conventional concrete in the construction sector. This study focused on strength and durability of AAC by utilizing waste industrial by-products such as ground granulated blast furnace slag (GGBS) and fly ash (FA) at ambient …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 393–400 Read article
-
Solid Acid Catalysts for the Selective Conversion of Biomass to Levulinic Acid
Abstract: Levulinic acid (LA) has emerged as a versatile platform chemical with significant potential for producing renewable fuels like gamma-valerolactone (GVL), biodegradable polymers, and fine chemicals from biomass (both terrestrial and marine which ae rich in carbohydrate). The selective conversion of biomass-derived carbohydrates to LA requires efficient catalytic systems that can overcome the recalcitrance of the biomass, namely the stiff-necked structural integrity of cellulose and the kind of strong interactions between …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
A Review of Modifications of Cement Slurry Formulations for Carbon Dioxide Storage
Abstract: Climate action, which includes activities aimed at mitigating climate change or reducing its adverse impacts, is the thirteenth goal of the 2030 SDGs (Sustainable Development Goals). Tthe successful commercial deployment of CCS technology would heavily rely on the integrity of the cement sheath used to complete the wellbores at the CO₂ storage sites. It has been established that the cement sheath made from conventional ordinary Portland cement (OPC) is not …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 1–21 Read article
-
Investigating The Alkalizing Potential of Chandanasava For Restoring Acid-Base Homeostasis in Renal Tubular Acidosis: A Computational and In Silico Pharmacological Study
Abstract: Chandanasava, a traditional Ayurvedic formulation, is recognized for its potential alkalizing properties, which may help restore acid-base homeostasis in conditions such as renal tubular acidosis (RTA). This study aims to investigate the active components of Chandanasava and their interactions with key renal target proteins, Pendrin and Carbonic Anhydrase II, which are essential for maintaining acid-base balance. An in silico approach was utilized to explore the pharmacological potential of the phytochemicals …
Published in International Journal of Bioinformatics and Computational Biology · Vol. 3, Issue 2, 2025 · pp. 28–52 Read article
-
Experimental Investigation of Various 3D Printing Materials for Making Travel Bag Wheels
Abstract: 3D printing is one of the emerging areas of manufacturing. Fused deposition modelling (FDM) is widely used 3D printing technique in various fields like jewellery, fashion, art and sculpture, medical, etc. In this paper, different polymer materials like ABS (Acrylonitrile Butadiene Styrene), PLA (Polylactic Acid), carbon fibre, PETG (Polyethylene Terephthalate), HIPS (High Impact Polystyrene), etc. were analysed for compressive strength by preparing standard specimens according to ASTM standard D695 to …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 1–7 Read article
-
Comparative Evaluation of Hibiscus Cannabinus and Solanum Trilobatum Extracts as Inhibitors for C- Steel Corrosion protection in Acidic Medium
Abstract: This study analyzed the efficacy of various inhibitors in safeguarding carbon steel against corrosion in hydrochloric acid. The compounds that were subjected to testing included Acalypha indica root extract (AIRE), Hibiscus cannabinus (HC), and Solanum trilobatum (ST) leaf extracts. The investigation focused on the inhibitory efficacy through the application of gravimetric and electrochemical impedance methods. GC-MS and FTIR were employed to investigate the features of the inhibitors and co-inhibitors. Tafel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 555–565 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
Carbon Dioxide as a Fundamental Component in Sustainable Organic Synthesis
Abstract: A lot of people are interested in carbon dioxide (CO₂) as a cheap, plentiful, and safe source of carbon for making chemical processes more sustainable. Using it as a C1 building block in organic synthesis is a promising way to make products with added value while having less of an impact on the environment. This article examines current advancements in CO₂ fixation into organic compounds, emphasising the creation of effective …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 22–34 Read article
-
Phase Transformation of Manganese Steel: A Role of Alloying Elements
Abstract: Low alloyed steels that are both strong and ductile are the primary focus of new material concept work due to economic considerations. One key to making good use of these materials is applying the right heat and thermo mechanical treatments. Phase transitions can be influenced by using different alloying procedures. Microstructural evolution and mechanical characteristics were investigated in relation to varying manganese, silicon, and chromium levels. Developing high-strength flat rolled …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 15–20 Read article
-
Evaluation of Mechanical Properties of Carbon Reinforced Composite for Different Process Parameters Using FDM
Abstract: Fused Deposition Modeling (FDM) stands as an advanced rapid prototyping technique, widely appreciated for its efficiency in constructing functional components within a reasonable timeframe. In this experimental exploration, a comparative analysis of mechanical properties was conducted on components manufactured through the FDM technique, specifically with a 20% concentration of SCF-PLA. The study considered process variables like layer thickness, infill pattern, and infill density. Employing diverse process parameters, a standard sample …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 218–228 Read article
-
Enhancement of Gas Sensitivity of Composites of Carbon Derived from Rubber Tree and SnO2 to Detect Ethanol Vapor at Room Temperature
Abstract: Films of composites of activated carbon powder prepared from saw dust derived from core of rubber tree (Hevea Brasiliensis) and tin oxide (SnO2) were fabricated using the doctor blade method. Carbon powder was activated using phosphoric acid at 500°C for 45 minutes. The weight ratio carbon/SnO2 varied from 0 to 12% in steps of 2. The structural, optical and morphological properties of films were investigated using XRD patterns, UV-visible spectrums …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 31–44 Read article
-
Review of Thermal Performance of Solar Air Heaters: Influence of Composite Materials and Advanced Thermal Storage Techniques
Abstract: Solar air heaters (SAHs) are essential devices for capturing solar energy and converting it into heat, finding applications in steam generation, refrigeration, agricultural drying, and space and water heating in residential and commercial environments. However, the thermal performance of SAHs is often limited by the low heat transfer coefficient of air and the absence of solar energy during nighttime, impacting efficiency and reliability. To address these challenges, this study explores …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 488–506 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Additive Manufacturing of Polymer-Based Advanced Composites: Mechanical Properties and Performance Evaluation
Abstract: Fabrication of large-scale and geometrically complex polymer-based advanced composites via fused deposition modelling (FDM) has been shown to be a promising technology for the production of such materials, however there are challenges in using short carbon fibre-reinforced polylactic acid (CF-PLA) which include obtaining high mechanical performance and maintaining dimensional accuracy with dynamic robot motion and complex interactions occurring between process parameters. The conventional approaches are mostly static feed rates or …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1335 Read article
-
Synthesis, Characterization and Evaluation of Pyridine derivatives
Abstract: Schiff bases, a class of organic compounds, have garnered significant attention due to their diverse applications in various fields such as pharmaceuticals, materials science, and coordination chemistry. This study provides a comprehensive overview of the synthesis of Schiff bases amino pyridine derivatives and aromatic ketones along with their anti-microbial activity. Method: The synthesis of Schiff bases primarily involves the condensation reaction between a primary amine and a carbonyl compound (ketone) …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 11, Issue 2, 2024 · pp. 35–48 Read article
-
Synthesis and Characterization of Sustainable, Low-Cost, Biomass-Derived Carbon Films from Hevea Brasiliensis (Rubber) Wood for Environmentally Friendly Gas Sensors with Enhanced Selectivity and Sensitivity to Polar Vapors and Hazardous Gases
Abstract: Hevea brasiliensis (rubber) wood sawdust was utilized to fabricate carbon gas sensors for detecting 1000 ppm of ethanol, methanol, acetone, carbon dioxide, and ammonia gases. The carbon particles were prepared by phosphoric acid impregnation followed by thermal activation and then fabricated into films on conductive and non-conductive substrates using the doctor blade method. X-ray diffraction (XRD) analysis revealed distinct graphitic features with peaks at the (002) and (100) planes, indicating …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 22–36 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article