Search
27 articles for “blue Dye”
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Isotherm and Kinetic Studies of Methylene Blue Dye Adsorption Using Sulfuric Acid Activated Nigerian Montmorillonite Clay
Abstract: The Presence of methylene blue and other basic dyes in water causes various harmful effects for both human and aquatic species. In this study, montmorillonite clay in its raw and acid (0.5M H2SO4) activated states were investigated for the sorption of methylene blue dye. The structural changes due to acid treatment were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The studied parameters that affect adsorption efficiency were …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 2, 2020 · pp. 37–47 Read article
-
Adsorption of Methylene Blue Dye from Aqueous Solution Using Polyaniline/Xanthan Gum Nanocomposite: Kinetic and Isotherm Studies
Abstract: ABSTRACTIn the present study, adsorptive properties of polyaniline/xanthan gum nanocomposite were investigated for methylene blue (MB) dye in aqueous solution. The effects of different parameters, namely adsorption time, adsorbent dose, pH and initial dye concentration were on dye adsorption were investigated. The results revealed that a rise se in pH lead to a significant increase in adsorption efficiency. Optimum adsorption time and nanocomposite dose were obtained 60 min and 0.075 …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 17–26 Read article
-
Facile Synthesis of SnO2/g-C3N4 nanocomposite for the photocatalytic degradation of Methylene Blue dye under visible light irradiation
Abstract: This work reports the nanoscale samples of pure tin dioxide (SnO₂), graphitic carbon nitride (g-C₃N₄), and their composite (SnO₂/g-C₃N₄) were successfully synthesized using the co-precipitation technique. The synthesized materials were extensively analyzed using multiple characterization techniques such as Powder X-ray Diffraction (PXRD), High-Resolution Scanning Electron Microscopy (HR-SEM), Energy-Dispersive X-ray Spectroscopy (EDAX), Fourier Transform Infrared Spectroscopy (FTIR), UV-Visible Spectroscopy, and High-Resolution Transmission Electron Microscopy (HR-TEM). Results from PXRD and EDAX confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1835–1845 Read article
-
Improved Photocatalytic Activity for Removal of Methylene Blue Dye from Aqueous Solutions with La2O3-Modified Ceria Heterostructured Binary Oxide Nanocomposite Particles
Abstract: The current study aimed to examine the photocatalytic efficacy of a bimetallic CeO2-La2O3 hetero-NC in comparison to monometallic CeO2 and La2O3 nanoparticles (NPs), utilizing Methylene Blue (MB)as pollutant sample under natural solar and UV irradiation. The coprecipitation method was utilized to produce a bimetallic CeO2-La2O3 hetero-NC. Following this, the nanostructures underwent characterization through various techniques including FT-IR, FE-SEM, XRD, UV Vis- DRS, Raman, and Photoluminescence spectroscopy. The catalytic activity of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 514–532 Read article
-
Comparative Adsorption Studies on Raw Rice Husk, Acid Leached Rice Husk and Base Leached Rice Husk by Using Methylene Blue as Dye
Abstract: Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use of raw rice husk (RRH), acid-leached rice husk (ALRH) and base-leached rice husk (BLRH) as adsorbents for decolorization. Characterization of raw rice was done by powder X-ray diffraction (P-XRD) analysis, surface area analysis and scanning electron microscopy. Raw rice husk was collected directly from …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 32–39 Read article
-
A Parametric Study of Methylene Blue Adsorption Using Low-cost Adsorbent
Abstract: This research focused on the adsorptive capacity of activated carbonaceous substance made from the peel of Spanish cherries to remove methylene blue dye from wastewater. Through batch adsorption tests, the impact of several variables on the percentage of dye removal was examined. These variables included adsorbent preparation temperature, adsorbent dosages, initial concentration of dye solution, process time, pH of dye solution, and operation temperature. It was found that using 1 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 3, 2023 · pp. 10–16 Read article
-
Studies on Removal of Coomassie Brilliant Blue R250(CBB) dye Usingligninas Adsorbent
Abstract: Coomassie brilliant blue R-250 (CBB), an organic dye present in wastewater effluent, affects environment by reducing the photosynthetic activity in aquatic ecosystems. CBB must be eliminated from effluent as a result. In the present study, lignin was utilized as a low-cost bio adsorbent for the removal of CBB dye employing an adsorption technique in order to minimize pollution caused by CBB dye. By studying the effect of several parameters includes …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 3, 2022 · pp. 9–19 Read article
-
Solar Light Photocatalytic Degradation of Methylene Blue and Methyl Orange Dyes by Ag-ZnO Nanocomposite
Abstract: A highly efficient silver-assisted ZnO nanocomposite was synthesized using the co-precipitation method, a technique that ensures a controlled and homogeneous formation of the composite material. The high purity of the synthesized nanocomposite was confirmed through detailed FTIR spectra analysis, which showed clear and distinct peaks corresponding to the functional groups present, indicating the absence of significant impurities. To evaluate the photocatalytic capabilities of the nanocomposite, a series of tests were …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 160–171 Read article
-
Synthesis of Copper Oxide Nanoparticles using Ultrasound for the Treatment of Textile Organic Dyes (Reactive Black 5 and Basic Blue 3)
Abstract: This paper describes the ultrasound assisted synthesis of copper oxide (CuO) nanoparticles using copper nitrate trihydrate and ammonium carbonate as reactants. The resultant product, copper carbonate was calcined at 400°C which was chosen based on the thermogravimetric analysis of copper carbonate precipitate. The final product CuO nanoparticles characterized by X-Ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDAX), particle size analyzer (PSA) and Brunner-Emmet-Teller surface area analyzer (BET) …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 3, 2015 · pp. 16–22 Read article
-
Electrooxidation of Methylene Blue over nanoparticle coated DSA synthesized by sol-gel method
Abstract: The current study uses the sol-gel approach to synthesize a new Dimensionally Stable Anode (DSA) covered with nanoparticles. The objective is to enhance the electrocatalytic activity and overall performance of the anodes in treating synthetic industrial wastewater containing reactive dyes. CuO and TiO2 nanoparticles are coated using a thermal decomposition technique on a titanium electrode. The DSA surface gains more surface area and better catalytic capabilities when nanoparticles are coated …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 34–43 Read article
-
Thin Film Gum Arabic Doping byPotassium BromideSolar Cells
Abstract: Three solar cell were made using Gum Arabic treated with potassium bromide with three types of dyes (Saffron dye, Henna dye and Blue 8GX dye) by using Spin Coating. Powder of gum Arabic and amount of potassium bromide was made by heated in temperature 100OC firstly, and using USB 2000 spectrometer device to calculated optical energy band gap of Gum Arabic before and after doping It was found to be …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 2, 2020 · pp. 23–29 Read article
-
Sentinel Node Mapping in Endometrial Cancer with Radioactive Colloid Injection: A Feasibility Study
Abstract: Role of lymphadenectomy in endometrial cancer is a much-debated one. Sentinel node mapping procedure attempts to minimize the morbidity of lymphadenectomy while providing the required prognostic information. In this study, we are attempting to detect the feasibility of SLN detection in early endometrial cancer by using radioactive technetium colloid injection. This is a prospective non-randomized single-institution study where patients with apparently early endometrial cancer without enlarged lymph nodes underwent preoperative …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 4, Issue 2, 2015 · pp. 13–16 Read article
-
Role of Axillary Reverse Mapping in Reducing the Risk of Lymphedema in Breast Cancer Patients: Current Perspectives
Abstract: Axillary reverse mapping is the technique of mapping and subsequently preserving the arm lymphatic drainage during axillary dissection. In 2007 Hiroo Suami described a constant sentry node draining most of the upper limb in anatomical dissection of cadavers. The presence of this node and its fairly constant location was later confirmed by many authors in clinical studies. With the use of blue dye alone, the detection rates are low than …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 6, Issue 1, 2017 · pp. 6–10 Read article
-
ZnO Nanostructure Shape Effects in Photocatalysis of Methylene Blue
Abstract: Nowadays, dyes are used in the food industry, textile industry, paper industry, hair coloring, light-harvesting arrays, photoelectrochemical cells, etc. Most of the dyes are nonbiodegradable, toxic, carcinogenic, and consist of organic compounds. These dye wastages are discharged into water bodies and the environment causing serious hazards to the marine ecosystem as well as the humans extensively. To treat toxic dyes traditional methods such as adsorption, activated carbon, ultrafiltration, and reverse …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 722–727 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Facile Fabrication and Characterization of Novel Sterculia Gum–graft-poly(n-isopropylacrylamide-co-acrylamide) Hydrogel for Efficient Removal of Cationic Dyes from Aqueous Solution
Abstract: Water is indispensable component of life. Contamination of water is a severe problem that affects human health, aquatic vegetation, and fauna. Aside from various effluents, a variety of cationic dyes generated by industrial effluents contributes significantly to water contamination. In this study, a sterculia gum graft-poly(n-isopropylacrylamide-co-acrylamide) hydrogel was made using a graft copolymerization technique with N,N′-methylene-bis-acrylamide as a crosslinker, ammonium persulphate as an initiator, and tetramethylethylenediamine as an accelerator to …
Published in Journal of Polymer & Composites · Vol. 10, Issue 2, 2022 · pp. 29–59 Read article
-
Exploring Gelatin Film an Eco-Friendly Biomaterial: Synthesis, Characterization, and Environmental Applications
Abstract: This study explores the synthesis, characterization, and application of eco-friendly gelatin films, a sustainable and biodegradable biopolymer alternative to synthetic plastics. Synthesized via solution casting and characterized by UV-Vis spectroscopy, FTIR, and TGA, these films demonstrated excellent molecular integrity and thickness-dependent properties, with higher gelatin concentrations leading to thicker films and delayed solubility. The research highlights their significant potential in removing diverse environmental pollutants, including dyes (methylene blue, methyl orange), …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 1–16 Read article
-
Synthesis of Lawsonia Inermis (Henna) Carbon Supported AgO Nanocomposite, Characterizations and Photocatalytic Activity Studies
Abstract: Synthesis of Carbon supported AgO nanocomposite is reported for first time. Henna carbon was successfully synthesized from henna leaf. Bare AgO and C-AgO nanocomposites are effectively made using precipitation method. The synthesised composites structural, morphological, and optical properties are assessed using FT-IR, XRD, FE-SEM, UV-DRS, and PL techniques. FT-IR analysis proved that specific functional groups of synthesized materials. The uniform distribution of the composites is revealed in the FE-SEM. XRD …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 749–760 Read article
-
Multifunctional and Photocatalytic Properties of DyFeO₃/Dy₃Fe₅O₁₂ Biphasic Nanoparticles
Abstract: Rare-earth orthoferrites constitute a class of compounds that exhibit remarkable magnetic, optical, and electronic properties across a wide temperature range. In the present study, a dysprosium-based orthoferrite containing dual phases of DyFeO₃ perovskite and Dy₃Fe₅O₁₂ garnet was successfully synthesized via the co-precipitation technique. X-ray diffraction (XRD) analysis was employed to investigate the structural configuration of the synthesized material. The diffraction pattern confirmed the formation of a biphasic composite comprising orthorhombic …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 41–54 Read article