Search
220 articles for “activated carbon (AC)”
-
Activating agents control the morphology of activated carbon materials from biomass
Abstract: The stems of the plant Calotropis gigantea (Cg) were were used as a feedstock for the activated carbon material. Carbonate (K 2 CO 3 ) and oxalate (Na 2 C 2 O 4 ) were used as chemical activating agents. The morphological features of the activated carbon materials were characterized using FEG-SEM. The morphology of the activated carbon materials is found to depend on the type of activating agent used. …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 1, 2025 · pp. 27–38 Read article
-
Preliminary Study on the Production of Activated Carbon from Moringa Oleifera Seed Shells by Thermal Activation Method
Abstract: Activated carbon was prepared from Moringa oleifera seed shells by thermal activation method. The carbonization and activation temperatures were 500, 600 and 700°C respectively, at 13 min for each process after pre-carbonization for 25 min. The pH of the activated carbon produced were 9.55 at 500°C, 9.78 at 600°C and 9.97 at 700°C while the yield decreased with increase in temperature as follows: 30.40% at 500°C, 29.35% at 600°C and …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 6, Issue 1, 2015 · pp. 13–16 Read article
-
Steam Activated Carbon Material from the Fruit Shells of Sterculia foetida for Energy and Environmental Applications
Abstract: Steam activation of the biochar from Sterculia foetida forms a green route for the synthesis of activated carbon material with high specific surface area (1017 m2/g). The corresponding value with a chemical activating agent (K2CO3) is much lower (596 m2/g). Structural parameters of the activated carbon materials were deduced from XRD studies. Moreover the thermal stability of the activated carbon materials from steam activation is nearly 100°C higher than that …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 1, 2024 · pp. 23–33 Read article
-
Characterization of Activated Carbon Prepared from Citrus Sinensis (Orange) Peels by X-ray Fluorescence Spectroscopy (XRF)
Abstract: The orange (specifically, the sweet orange) is the fruit of the citrus species Citrus sinensis in the family rutaceae. Citrus sinensis (orange) fruit is one of the common traditional plants grown in many areas in India. The wastes of the Citrus sinensis (orange) fruit called orange peels were used to prepare activated carbon through chemical activation method. The activated carbon is an excellent adsorbent and its applications are widely described …
Published in Emerging Trends in Chemical Engineering · Vol. 2, Issue 3, 2015 · pp. 50–52 Read article
-
Synthesis and Evaluation of MgO-Supported Activated Carbon for Carbon dioxide Capture
Abstract: Carbon dioxide (CO₂) capture has emerged as a critical strategy for mitigating greenhouse gas emissions and addressing global climate change. In this study, a series of MgO-supported activated carbon adsorbents containing 2, 4, 6, 8, and 10 wt% MgO were successfully synthesized using the impregnation method to evaluate their CO₂ adsorption performance. The structural, chemical, and surface properties of the prepared materials were characterized using powder X-ray diffraction (PXRD), Fourier-transform …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 3, 2026 · pp. 53–57 Read article
-
Preparation and Characterisation of Activated Carbon from Rice Husk and its Polyvinylpyrrolidone (PVP) Composite for Heavy Metal Removal from Simulated Wastewater
Abstract: AbstractRemoval of heavy metals from industrial wastewater is of importance due to rapid increase in global industrial activities. This investigation deals with the preparation of adsorbentactivated carbon from agricultural waste material such as coconut shell, orange peel, ricehusk, peanut husk and sawdust to remove heavy metals from wastewater. The abundance and availability of rice husk, an agricultural waste, make them as a good source for precursor of activated carbon. Hence, …
Published in Journal of Water Pollution & Purification Research · Vol. 4, Issue 3, 2017 · pp. 10–15 Read article
-
Activated Carbon Materials as Ideal Adsorbents for the Desulfurization of Fossil Fuels
Abstract: Removal of organosulfur compounds from diesel is of interest from scientific, social, economic, and environmental viewpoints. Production of clean fuel remains a primary goal of the petroleum refining industry. The reduction of sulfur content below stringent ppm levels in diesel fuels becomesincreasingly challenging due to the presence of sterically hindered sulfur compounds, such as 4,6- dialkyldibenzothiophenes, which are resistant to removal over conventional supported mixed sulfide hydrodesulfurization catalysts. Consequently, alternative …
Published in International Journal of Pollution: Prevention & Control · Vol. 4, Issue 1, 2026 · pp. 28–34 Read article
-
A Study on adsorption of Phenol red dye and Chromium (VI) metal ion using activated carbon derived from Lantana camara with the activation of potassium hydroxide.
Abstract: Commercial activated carbons are expensive to produce and regenerate, it is essential to produce activatedcarbon using low-cost raw materials and methods. This study's goal is to demonstrate the possible adsorptionproperties of activated carbon made from Lantana camara for the removal of dyes and metal ions fromaqueous solutions. In this study, activated carbon from Lantana camara stems was obtained through a one-step chemical activation procedure using potassium hydroxide KOH. The surface …
Published in Journal of Nuclear Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 1–10 Read article
-
Sequestration of Cr(VI) by the Activated Carbon prepared from Coffee husk(CHAC)
Abstract: The potential of Coffee husks for the production of a low-cost activated carbon (CHAC) was investigated in this study. During the synthesis of the adsorbent, the concentration of the activating agent (H3PO4), impregnation ratio, carbonization temperature and holding time were optimized by Response Surface Method (RSM) using Box-Behnken design. Further, the application of coffee husk activated carbon for Cr (VI) adsorption from aqueous solution was investigated.
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 3, 2019 · pp. 8–16 Read article
-
Adsorption Isotherm Study for Activated Carbon Produced from Cassava Peel
Abstract: Adsorption isotherm study of Activated Carbon produced from cassava peel was carried out using phenol solution as the adsorbate. Langmuir and Freundlich isotherm models were employed for the study. Varying ratios of 1:1, 0.75:1, 0.5:1, and 0.25:1 activating agent to cassava peel were used for the formulation of the Activated Carbon. The Freundlich R2 value for the 1:1, 0.75:1, 0.5:1, and 0.25:1 formulations was 0.822, 0.979, 0.971 and 0.974, respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 8–12 Read article
-
PREPARATION AND CHARACTERIZATION OF ACTIVATED CARBON FROM ORANGE PEELS
Abstract: In this study, an attempt was made to establish Green Energy from agricultural waste (orange peels). Activated carbon (AC) produced from orange peels with chemical activation agent i.e. phosphoric acid (H3PO4) by carbonization activation process. The influences of the process, carbonization temperature and activation temperature (600 °C) for time 2 hour with H3PO4 of 1:1 ratio on the resulting activated carbon properties were evaluated. The AC is an excellent adsorbent …
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 1, 2018 · pp. 15–20 Read article
-
Polymer Waste-Derived Activated Carbon from PET for High-Efficiency Supercapacitor Electrodes
Abstract: The exponential increase in plastic waste, particularly Polyethylene Terephthalate (PET)—a polymer characterized by its repeating aromatic terephthalate units and ester linkages—has escalated into a global environmental crisis. This study details a low-cost synthesis of porous carbon materials derived from waste PET via pyrolysis followed by chemical activation with calcium hydroxide (Ca(OH)2). During pyrolysis, the PET polymer chains undergo thermal degradation, where the aromatic rings in the backbone serve as precursors …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1419–1447 Read article
-
Physical Activation Process and Characterization of Bioactive Carbon, with a Focus on its Applications
Abstract: Activated carbon is a form of carbon that has been processed to enhance its surface area and porosity. This processing enables it to function as an efficient adsorbent, attracting and retaining other molecules on its surface. In our environment, many types of biomass waste are inexpensive and renewable. Recently, there has been a growing interest in producing products from renewable resources. A prime example is the use of biomass to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 507–517 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Preparation and Characterization of Activated Carbon from Bamboo by Chemical Activation
Abstract: In this study, an attempt was made to prepare an activated carbon (AC) from bamboo by chemical activation method. Phosphoric acid (H3PO4) was used as a chemical activation agent for the production of AC from bamboo under conditions of temperature 600 °C for 1 h. The AC is an excellent adsorbent and its applications are widely described in literatures. Prepared ACs, are characterized by standard methods XRD, SEM, FTIR, XRF. …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 1, 2016 · pp. 1–6 Read article
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Study of Heavy Metal Ions and Its Removal from Wastewater by Using Activated Carbon as Waste Tire Rubber
Abstract: The purpose of this study is to identify various methods that are available for treating industrial waste water using different methods. The effluent stream released from the industries carries various hazardous chemical compounds and heavy metal ions. Heavy metal pollution has become a critical environmental challenge facing the world nowadays. Hence it has become important to eliminate those heavy metals from the effluent due to their toxicity.
Published in Journal of Water Pollution & Purification Research · Vol. 10, Issue 1, 2023 · pp. 28–35 Read article
-
Comparison Study between Pd/AC and Pd/CB for Simultaneous Production of Hydrogen and Carbon Nanotubes using Thermocatalytic Decomposition of Methane
Abstract: Hydrogen is an attractive alternative source of the future need. It could be produced from the diverse sources and is used for a transport fuel which chiefly alliance with fuel cells. The crucial challenge for hydrogen production is reducing the price of production technologies to make the ensuing hydrogen price economical with conventional fuels. Thermocatalytic decomposition (TCD) of methane is one of the most advantageous technique which will meet the …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 18, Issue 1, 2016 · pp. 18–26 Read article
-
Treatment of Wastewater with Acid and Alkaline Modified Coconut Fiber Carbon
Abstract: The thrust of this study is to investigate the effect of acid and alkaline modified coconut fibre carbon for Liquified Natural Gas (LNG) waste water treatment. The Coconut fibre were obtained as an agrowaste material from Ahiankwo Market in Umuoyoro, Omuma L.G.A, Rivers State, Nigeria while the LNG waste water was sourced from Greenvile LNG plant in Rumuji, Emohua L.G.A, Rivers state, Nigeria. The coconut fiber was carbonized, chemically activated …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 13, Issue 3, 2022 · pp. 10–25 Read article
-
Sustainable Carbon Materials for Catalysis, Energy Conversion, and Environmental Remediation
Abstract: Among the most ancient and adaptable materials used by humans, carbon finds use in a wide range of industries, including electronics, energy production, medicine, water purification, air filtration, and catalysis. Among them, activated carbon's highly developed microporous structure, remarkably large specific surface area, and adjustable surface functions have drawn a great deal of attention from both science and industry. Activated carbon materials have been widely used as molecular sieves, adsorbents …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 47–52 Read article