Search
22 articles for “Welding Speed”
-
The Effect of Welding Parameter and Tool Geometry on Mechanical Properties of RZ5-10wt%TiC FSW Joint
Abstract: Friction Stir Welding (FSW) of metal matrix composite (MMC) provides the grain refinement and reinforcement redistribution of the composite used for wide application in aerospace and structural. This wide application needs development of best-suited joining process for MMC which is complicated to unite by the traditional welding process. The paper observed the consequence of the welding parameter and tools’ geometry on the mechanical properties of the friction stir butt welded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Rotational Speed Influence on Weld Temperature in Friction Stir Lap Joint of Aluminium Alloy 6061 Using Numerical Simulation
Abstract: The weld quality assessment in friction stir welding depends on the choice of suitable weld parameters. Rotational speed is one such parameter. The study utilizes a computational fluid dynamics model to examine the influence of various rotational on the workpiece and weld interface temperature. The workpiece selected for this study is an Aluminium Alloy 6061, while the tool employed is a truncated conical pin tool featuring a conical shoulder in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 235–245 Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
Experimental Investigation of Aluminum Alloy 8010 by Friction Stir Welding
Abstract: A solid state welding method called friction stir welding (FSW) is used to fuse metals and alloys that are challenging to fuse using traditional fusion welding. The effects of tool pin and shoulder diameter on joining the aluminum alloy Al 8010 were examined in this study. The basis material for combining single butt-welded joints is a plate with a thickness of 6 mm. The welding was carried out on the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 14–19 Read article
-
Prediction of temperatures and residual stresses during FSW of AA2024 and AA7075 with copper using HYPERWELD software
Abstract: This paper investigates the temperature at different workpiece and tool pin sections. In this investigation, various materials are utilized, for example, AA7050, AA2024, and Copper, for other process parameters. Tool rotational speed, tool tilt angle, and welding speed are process parameters. Thermal distribution results are examined with the assistance of these process parameters. Altair’s Hyper Weld, a preeminent computer-aided engineering (CAE) application for the simulation of friction stir welding, has …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 101–112 Read article
-
Investigation of Process Specifications on Friction Stir Welded Aluminium 5083 and 6082 Alloys
Abstract: Aluminium 5083 alloys were mainly used for naval based applications because of better corrosion resistance feature. Similarly aluminium 6082 alloy being a structurally significant material found its applications in construction sector. Fusion welding of these two heterogeneous alloys is bit hard, since it evolves many defects. Present Investigation deals with two cases of distinct alloys through FSW process. Case 1 represents 31 experimental trails performed by 5 various tool pin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 1–11 Read article
-
Review in Friction Stud Welding of Aluminium to Steel
Abstract: The demand for friction stud welded aluminum/steel joints has increased in many significant applications including cryogenics, structural engineering, spacecraft, rocket fuel tanks and high vacuum chambers owing to their superior properties. In automobile engineering, there is a requirement to join a mild steel earthing pin which is in the shape of a stud to an aluminum car body. Aluminum and steel was considered to join using friction stud welding. This …
Published in Journal of Thermal Engineering and Applications Read article
-
Analysis of Friction Stir Welding Utilizing ANSYS: A Study Based on Simulation
Abstract: Friction Stir Welding (FSW) represents a sophisticated solid-state welding methodology that has attracted considerable scholarly attention due to its efficacy in amalgamating high-strength, lightweight substrates including aluminium, magnesium, and titanium alloys. FSW enables the fabrication of defect free products with a substantial amount of mechanical and wear properties. The process is highly sensitive to various parameters that significantly influence the quality and strength of the final product. Studies have shown …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 62–77 Read article
-
Evaluation of Critical MMAW Welding Defects Using Computer Simulation in Industrial Manufacturing Systems
Abstract: Manufacturing is one of the key sectors of any countries GDP and welding is one of the prime manufacturing processes of the manufacturing sector. Welding has several notable advantages over mechanical joining techniques, including higher structural integrity, design flexibility, and cost and weight lowers. Welded products/structures are subjected to serious issues of residual stresses and distortions. The performance and sturdiness of the welded structures are severely impacted by weld remaining …
Published in International Journal of Industrial and Product Design Engineering · Vol. 3, Issue 2, 2025 · pp. 18–26 Read article
-
Influence of Different Fluxes on the Angular Distortion of A-TIG Welded 316L Steel Plates
Abstract: The conventional Tungsten Inert Gas (TIG) welding process is an autogenous welding process primarily used to weld thin metal sheets in the food processing and chemical industry. The process can weld almost all engineering materials but suffers from the limitation of slow speed and inability to weld thick sections. With the development of A-TIG welding, some of the drawbacks of traditional TIG welding have been addressed, where the activated flux …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 99–103 Read article
-
Evaluation on the Mechanical Strength of TIG Welded 6061Aluminium Alloy Joints
Abstract: Aluminum alloy Al-6061 is extensively used in aerospace, automotive, and marine industries due to its excellent mechanical properties, lightweight nature, and corrosion resistance. However, welding this alloy presents challenges such as porosity, hot cracking, and strength reduction in the heat-affected zone (HAZ). Tungsten Inert Gas (TIG) welding, known for its precision and quality, is commonly employed for joining Al-6061. This study investigates the tensile strength of TIG-welded butt joints of …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 34–39 Read article
-
Taguchi Method: A New Approach for Evaluating and Optimizing Parameters of TIG Welding
Abstract: The construction and industrial sectors must improve the quality of their welds. An experimental plate fabricated of SS304L was to be tungsten inert gas (TIG) welded in this experiment, and an effort was made to enhance the mechanical properties. The Taguchi L9 orthogonal array was used to organize the experiment, and the mechanism of advancement was used to simulate the performance. The tensile strength of the welded junction rises in …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 121–129 Read article
-
Optimization of Process Parameters for Cu90Ni10 Alloy Processed by Wire Arc Additive Manufacturing (WAAM) Using an L9 Orthogonal Array
Abstract: Abstract Wire Arc Additive Manufacturing (WAAM) has gained significant attention in recent years as a promising technique for producing complex metallic components. This study focuses on the processing of Cu90Ni10 alloy using WAAM and employs an L9 orthogonal array to optimize the mechanical properties of the resulting components. Cu90Ni10 alloy is known for its excellent corrosion resistance and electrical conductivity, making it a critical material in various industries, including aerospace …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 292–301 Read article
-
Experimental Investigation of Hardness of FSW Al 5083 Alloy for Naval and Marine Application
Abstract: Friction stir welding (FSW) is a relatively novel method of solid-state joining. This connecting method is adaptable, environmentally benign, and low-energy. The present study focuses on hardness testing on welded butt joints, introducing the Friction Stir Welding procedure on aluminium alloys Al 5083, which are known for their remarkable performance in severe conditions. It is widely used in naval and marine applications due to its excellent resistance to seawater damage. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 227–236 Read article
-
Automatic Laser Welding Machine Using PLCs
Abstract: This paper presents the design and implementation of an automatic laser welding machine controlled by a Programmable Logic Controller (PLC) technology. Laser welding has gained significant attention in various industries due to its precision, speed, and efficiency. However, manual operation of laser welding systems can be labor-intensive and prone to errors. The proposed system aims to address these challenges by automating the welding process using PLC-based control. The system architecture …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 2, Issue 1, 2024 · pp. 9–15 Read article
-
A Study on Fracture Sem Analysis by Optimization of FSW When a Composite Material Al 6061 Mixed with Fly Ash is Done with Cooper Using Anova Method
Abstract: The current study aims to examine how different parameters in friction stir spot welding influence hardness and tensile strength, while identifying the most suitable parameter combinations to enhance the overall quality of the fabricated components. The experimental work involves joining dissimilar materials, where one specimen consists of Aluminum alloy 6061 reinforced with 10% fly ash, and the other is a copper alloy. Various process conditions are altered during testing to …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
Conceptualization of An Intelligent Decision Framework for Control Factors and Weld Quality Prediction
Abstract: To improve the robot's welding quality, control welding precision, optimize welding parameters, realize continuous welding quality database optimization, and increase welding defect detection, a fuzzy neural network-based intelligent decision-making system must be built. This study demonstrates how fuzzy control theory and BP neural networks may be used to identify welding issues and enhance process variables. The experimental findings indicate that, with seam classification accuracy close to 90%, enhancing welding parameters …
Published in Journal of Polymer & Composites · Vol. 11, Issue 6, 2023 · pp. 10–19 Read article
-
Examining Experimentally the Impact of Spot-Welding Process Variables on Metal Matrix Composites
Abstract: Metal matrix composites work in concert with reinforcement to improve the material's qualities. Reliability in joining metal matrix composites using traditional methods is challenging. Friction Stir Welding has demonstrated the ability to solve numerous issues that arise in traditional welding procedures. Initially, the Friction Stir Welding (FSW) welding procedure produced metal seams that were solid. Additionally, FSW was expanded to join MMCs and their alloys. The purpose of this review …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 193–201 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
Design and Manufacturing of Suspension and Steering System of a F3 Vehicle
Abstract: The suspension and steering systems are critical subsystems of any formula-style racing vehicle, directly influencing its stability, handling, and driver safety. This paper focuses on the design, analysis, and manufacturing of suspension and steering systems for a Formula Student F3 vehicle. The primary objective is to develop a lightweight, reliable, and efficient design that complies with Formula Student competition rulebooks while ensuring optimum ride quality and performance. Using advanced computer-aided …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–12 Read article