Search
16 articles for “Water-Cement Ratio”
-
Enhancing Compressive Strength and Durability through Optimization of Concrete Mixtures
Abstract: This research investigates how varying cement-aggregate ratio, water-cement ratio, and slump height affect the compressive strength of concrete mixtures. Through an analysis of 36 samples, each representing different combinations of these parameters, significant insights are gained into the optimization of concrete mix designs for construction applications. The study reveals that higher water-cement ratios tend to decrease compressive strength due to increased porosity in cured concrete. Conversely, higher cement-aggregate ratios generally …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 1, 2024 · pp. 1–12 Read article
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Experimental Study of Modified M20 Concrete with Waste Plastic Polystyrene Cubes
Abstract: The study of this research paper deals with the effectiveness of waste plastics used in concrete construction. The M20 concrete specimens were mixed with waste plastic material like polystyrene as cubes of different sizes such as 5, 6, 7, 8, 9, and 10 cm and were tested for their compressive strength. The standard size of waste plastic concrete specimens was 15 cm × 15 cm × 15 cm with the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 14–19 Read article
-
Experimental Study on Mechanical and Durability Properties of Concrete Using Mineral Admixtures
Abstract: This study explores the partial replacement of OPC with Fly Ash (FA), Rice Husk Ash (RHA), Glass Powder (GP), Palm Oil Fuel Ash (POFA) at varying percentages of 10%, 20%, 30% with the addition of 1% chemical admixture with water-cement ratio of 0.45. The influence of these replacements on the fresh properties, mechanical and durability properties is evaluated at 7, 28, and 56 days of curing. The results indicate that …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 148–160 Read article
-
Analytical exploration of self-consolidating concrete (SCC) mix proportions via the Taguchi method
Abstract: To address the challenge of limited space within structural elements containing densely packed reinforcement, Self-Compacting Concrete (SCC) was developed. This study focuses on optimizing the experimentation process using Design of Experiments (DoE). Taguchi's standard L(3) orthogonal array (OA) was utilized, consisting of four factors with three levels each, resulting in nine trial mixes. The factors examined include water-powder ratio, cementitious material content, superplasticizer dosage, and steel fiber content. The aim …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 1, 2024 · pp. 1–16 Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
Influence of Supplementary Cementitious Materials on Chemical Shrinkage in Cement
Abstract: Chemical shrinkage is the volume reduction observed in cement during early hydration due to chemical reactions, which critically influences the internal stresses, cracking tendencies, and durability of cementitious system. Present study is focused on effect of supplementary cementitious material (SCM) on chemical shrinkage. Dilatometry method is used to assess the impacts of SCMs on chemical shrinkage, in this this study. The research incorporates experiments with laboratory-synthesized cement and three SCMs—fly …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 98–107 Read article
-
Polymeric Actions to Make Recycled Aggregate of Concrete Improved
Abstract: Recycling construction materials of concrete, steel, and steel scraps is an essential technique to promote sustainable material flow. The restricted reuse of recycled concrete aggregate (RCA) can be justified, even in part, by the impact on strength and durability of new RCA-based concrete, instead of natural aggregates. Various research has been conducted on improving RCA effectiveness, in particular resistance and water absorption to disintegration. Application of polymer-dependent therapy was used …
Published in Journal of Polymer & Composites Read article
-
Impact of Composite Materials by Silica Fume and Fly Ash in Cement and Partial Substitution of Fine Aggregate Using Quarry Dust in Steel Fibre Concrete
Abstract: Mineral admixtures can be added to concrete to replace some of the cement, increasing its overall strength. Fly ash (FA) and silica fume (SF) are two often used mineral admixtures. A series of experiments were conducted to investigate the effect of adding varied amounts of fly ash and a consistent amount of silica fume on concrete strength by using the same amount of substitute for cement and the same water-binder …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 139–147 Read article
-
A Comprehensive Review of Concrete Containing Magnetically Treated Water
Abstract: In Present scenario, Construction has benefited greatly from the characteristics of concrete and the magnetism of water. The procedure of permitting water to pass through the magnetic field is part of creating magnetised water, utilizing those properties of concrete that can affect such as compressive strength, workability, porosity, permeability, durability, water absorption capacity, hydration rate and aqueous ratio. Reduced cement usage and improved mechanical and technical qualities of concrete are …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 52–64 Read article
-
Conducting an Experimental Study on the Behavior of Concrete Involves Partially Substituting Coarse Aggregate with Waste Granite Tiles and Fine Aggregate with Quartz Sandstone Powder
Abstract: In agricultural nations where cement is generally utilized, the high and consistently inflating cost of cement has made development over the top expensive. Removal of strong waste materials is an extraordinary worry in urban communities from one side of the planet to the other. A portion of these waste materials are not biodegradable, which frequently prompts removal emergency and natural contamination. Numerous endeavors are being made for the reusing of …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 26–34 Read article
-
Multi-Objective Optimization of Geopolymer Cement Block Parameters Using Bentonite and Fly Ash
Abstract: Presently, geopolymer blocks are being produced by using industrial by-products like fly ash. This study focuses on the development of geopolymer cement blocks using the composition of bentonite and fly ash. The specific objective is to examine and optimize the geopolymer cement block parameters using a novel composition. The oxide ratio, alkali activator ratio, and molarity are considered variables. In contrast, the responses are considered as flow table, fresh density, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 810–828 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: Inorganic molecules undergo a chemical reaction that results in the production of a brand-new building material known as geopolymer concrete. Otherwise known as an inorganic aluminohydroxide polymer, geopolymer is made mostly from by-products like fly ash and geologically derived silicon (Si) and aluminium (Al). It is a superior building material for the future because of its great mechanical qualities, significant chemical resistance (attack by magnesium or sulphate), low shrinkage and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 46–51 Read article
-
Stabilization of Heavy Metal Sludge to Pass the TCLP Test Using Cement with a Sinter as a Additive
Abstract: According to the U.S. Stabilisation is the best-proven technology now in use, according to the Environmental Protection Agency's definition in Title 40, Part 268 of the Code of Federal Regulations (40 CFR 268).This method prevents harmful contaminants from leaking into the environment by physically and chemically trapping them all in a matrix. The investigations used 15 different water-mixed combinations of cement, fly ash, sinter, and lime. The study also examined …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 16–24 Read article
-
Investigation on Mechanical Properties of Geo Polymer Concrete With Fly Ash and Steel Fibers
Abstract: The goal of this project was to manufacture fly ash-based geopolymer concrete (FAC), a more environmentally friendly substitute for conventional Portland cement concrete (OPC) by using fly ash (FA) in place of cement. The study discovered that the properties of FAC were comparable to those of OPC, and that the concrete's performance was greatly impacted by the geopolymer's polymeric nature. The geopolymerization process was started with an alkaline solution, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 250–260 Read article