Search
47 articles for “Thermal Recovery”
-
Fitting Relative Permeability’s Curves Based on Laboratory Production Data for A Thermal Composite Core Flooding Experiment
Abstract: Numerical simulators are effective tools for an adequate understanding of models geological and dynamic properties under which enhanced oil recovery techniques are investigated. Core flooding experiments are usually conducted for calibrating simulated rock and fluid properties against actual test results at micro-scales, and for further scaling up processes to the reservoir scale. In this paper, laboratory experiments data were used as input for a numerical simulator to study the effect …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 41–56 Read article
-
Thermodynamic Optimization and Exergy-Based Performance Analysis of Hybrid Thermal Management Systems for Electric Vehicles
Abstract: The transition toward sustainable transportation has brought electric vehicles (EVs) to the forefront of modern engineering innovation. Despite their environmental benefits and improved energy efficiency, EVs face major thermal challenges that affect performance, safety, and durability. Efficient thermal management of batteries, power electronics, and electric drive systems is vital to ensure reliability under diverse operating conditions. This study presents a detailed thermodynamic optimization and exergy-based performance analysis of hybrid thermal …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 2, 2025 · pp. 19–23 Read article
-
Micro Steam Turbines for Hybrid Power Source Vehicles
Abstract: The paper describes a new hybrid power system for vehicles consisting in an Internal Combustion Engine (ICE) plus a micro steam turbine (MST) that supplies energy to an electric motor. The result of this hybridization is a reduction in fuel consumption and an improvement in performance efficiency. The micro steam turbine unit uses the released thermal energy from the ICE to generate water vapor flow, which is accelerated in a …
Published in Journal of Automobile Engineering and Applications · Vol. 11, Issue 1, 2024 · pp. 9–17 Read article
-
Rheological Studies of a Cross-Linked Polymer Gel System
Abstract: The petroleum accumulations are found associated with water and it is rarely obtained without accompanying water production. Water production is a major technical, environmental, and economic challenge associated with oil and gas extraction. Rheological findings are of fundamental importance for the development, manufacture and processing of innumerable products. Polymeric gels exhibit a wide range of rheological properties and they are stable both mechanically and thermally in most cases thus are …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 13–26 Read article
-
Low-Grade Heat Recovery: Emerging Materials and Systems for Efficient Utilization
Abstract: Low-grade heat (LGH), generally characterized by temperatures below 200°C, constitutes a significant portion of wasted thermal energy in industrial, commercial, and even residential processes. Despite its vast availability, the efficient recovery and utilization of LGH remains underdeveloped due to its inherently low exergy content and the limitations of traditional heat recovery technologies. The creation of cutting-edge materials and creative system-level approaches for LGH recovery has accelerated significantly as companies continue …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 1, 2025 · pp. 24–29 Read article
-
A Cyclic Injection of High Temperature N2-foam in Fuyv Reservoir
Abstract: Steam stimulation has already been proved as an important thermal recovery technology. In Daqing, the development and management of high-heterogeneous heavy oil reservoirs plays an important role in stabilizing the oil output. To combine the good features of steam injection and cyclic injection, a cyclic steam flooding has been conducted in the Fuyv reservoir, Daqing. This paper is to present a detailed process of the cyclic-steam injection. The target Fuyv …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 1–12 Read article
-
Advanced Quantitative Analysis of Dynamic Recovery during Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls, and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Advanced Quantitative Analysis of Dynamic Recovery During Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 1–14 Read article
-
Thermally Trigged Self-Healing Smart Shape Memory Polymer Composite
Abstract: Temperature-responsive self-actuating PU/MWCNTs composites were prepared with micro-compounder through in-situ polymerization. For making of 1CNTPU composite sample 1 part per hundred multiwall Carbone nanotubes (MWCNTs) were reinforced into the neat polyurethane (PU) base matrix. Surface characterizations for pure and composite have studying by using Atomic Force Microscope (AFM), high resolutions Scanning Electron Microscopy (SEM). Properties like shape recovery, storage modulus, loss modulus, tensile stress, degree of hardness, and flexural stress …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 10–18 Read article
-
Green and Edge-Aware Computing: Rethinking Cloud Infrastructure for Sustainability
Abstract: Cloud computing has transformed the way organizations access and manage information technology resources, providing flexible, scalable, and cost-efficient services that support today’s data-driven world. Despite these advantages, the rapid expansion of large-scale cloud infrastructures has resulted in rising energy consumption, significant heat generation, and a growing environmental footprint. This research focuses on advancing green cloud computing by examining methods that reduce power usage while maintaining high performance. Key strategies include …
Published in Journal of Computer Technology & Applications · Vol. 17, Issue 1, 2026 · pp. 17–24 Read article
-
Modification in Stacks Design for the Integrated Incinerator–Fired Heater System Using CFD
Abstract: AbstractIn a unique integration of its kind, incinerator hot flue gases are routed below convection section of fired heater for enhanced heat recovery for an ongoing oil and gas field development projects. High degree of flue gas mixing between incinerator and heater flue gases is desired at inlet section of coils in convection section for optimal heat recovery. Also design of stack should take care of required draught in incinerator …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 27–35 Read article
-
Investigation on the Benefits of Steam Adsorption and Distribution during Cyclic Steam Injection to Improve Oil Recovery - FNE Case Study, Sudan
Abstract: One of the main types of Enhanced Oil Recovery (EOR) methods is thermal stimulation method which is an increasingly common method of extracting heavy oil. there are different forms of the technology of thermal method Cyclic steam stimulation, Steam flooding and In-situ combustion “Fire flooding” are commonly applied to oil reservoirs, which are relatively shallow very viscous oil at the reservoir temperature, the most widely used steam injection methods for …
Published in Journal of Petroleum Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 1–21 Read article
-
Development of Bio-Based Polymer Composites for Sustainable Construction Materials
Abstract: The demand for eco-friendly sustainable construction materials has gained significant interest in the development of bio-based polymer composites as ecologically suitable alternatives to traditional petrochemical-based polymer composites. The environmental problems associated with non-biodegradable, high-carbon-footprint polymer composites make their more bio-based counterparts an attractive option that offers both environmental and structural benefits. To evaluate environmental impact and industrial feasibility, a comprehensive life cycle assessment was performed. The methodology adopts optimized bio-based …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 194–208 Read article
-
Performance Evaluation of Rubber Crumb-Modified Bitumen for Sustainable Pavement Applications
Abstract: This research investigates the effect of rubber crumb modification on the physical and mechanical properties of VG-40 bitumen for flexible pavement applications. Rubber crumbs were incorporated at varying percentages (0, 8, 10, 12, 14, and 16%) to analyze their impact on penetration, softening point, ductility, and elastic recovery. Additionally, the Marshall stability test was conducted to evaluate the strength and deformation characteristics of the bitumen mix. The results demonstrated a …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 20–24 Read article
-
Analysis of Thermoelectric Generator for Automotive Exhaust Energy Recovery
Abstract: Utilizing waste heat from thermodynamic systems has shown to be a successful tactic for reducing environmental emissions and improving overall energy efficiency. About 40% of the chemical energy generated during fuel combustion is rejected by exhaust gases in internal combustion engines. It is possible to increase vehicle fuel efficiency and lower greenhouse gas emissions by harvesting this otherwise lost heat energy and turning it into useable electrical power. A viable …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Influence of ZycoTherm Dosage on Polymer Modified Bitumen and Marshall Performance of Hydrated Lime Incorporated Warm Mix Bituminous Concrete
Abstract: This study examines the effect of ZycoTherm on PMB 76-10 binder characteristics and the performance of PMB-based Bituminous Concrete (BC) Grade-II prepared at reduced mixing temperatures, with and without hydrated lime. PMB 76-10 was modified with ZycoTherm at dosages of 0.05%, 0.10%, 0.15%, and 0.20% by weight of binder and evaluated using conventional and residue-based tests. Increasing ZycoTherm dosage decreased penetration, while softening point, flash point, and elastic recovery increased, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 256–267 Read article
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
A Review of Building-Integrated Photovoltaic/Thermal (BIPV/T) Systems
Abstract: AbstractFor the last years, Building Integrated Photovoltaic (BIPV) was the only gate to use PV solar energy into housing area. However, there is another type of building integration technology which is building integrated photovoltaic-thermal (BIPV/T) that is gaining popularity at a very high rate. Therefore, this paper presents a review of the BIPV/T existing technologies, presenting a general overview of the system, including historical projects developed from the 80’s till …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 10, Issue 1, 2019 · pp. 9–27 Read article
-
Waste-Heat Recovery Systems for Sustainable Industrial Energy Management
Abstract: Industrial processes consume vast amounts of energy, often resulting in substantial heat losses to the environment. Waste-heat recovery (WHR) systems provide a viable solution to harness this otherwise lost thermal energy, improving overall energy efficiency, reducing operational costs, and contributing to sustainable industrial practices. This study investigates the design, implementation, and optimization of waste-heat recovery systems across various industrial sectors, including power generation, chemical processing, cement production, and steel manufacturing.The …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 78–84 Read article
-
Smart Material–Based Energy Conversion and Storage Solutions in Industrial Engineering Systems
Abstract: A revolutionary step for attaining energy-efficient, sustainable, and intelligent industrial processes is the use of smart materials with industrial engineering systems. Advanced approaches to energy harvesting, conversion, and storage in industrial settings are made possible via smart materials, which are distinguished by their capacity to sense and react dynamically to mechanical, thermal, electrical, and external cues. These materials enable accurate energy recovery from vibrations in machinery, operational loads, waste heat, …
Published in International Journal of Industrial and Product Design Engineering · Vol. 3, Issue 2, 2025 · pp. 33–38 Read article