Search
1966 articles for “SOUL 3.0” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Substitution of La3+ in Cu0.5Co0.5 LaxFe2-x O4 (x=0.02, 0.06) spinel ferrites improves the structural and dielectric Properties
Abstract: Nanosized Spinel ferrites with composition Cu0.5Co0.5 LaxFe2-x O4 (x=0.2, 0.6) synthesized by Sol-Gel auto Combustion method. The prepared sample was calcinated at 8000c for 4 hours. The substitution of La3+ effects the structural parameters, which is characterized by X-ray diffraction (XRD). The X-rd analysis shows that the crystallite size is 34.609 nm for 0.02 and 38.994 nm for 0.06 was calculated by using Debye-Scherrer’s formula. dislocation density shows at value …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 45–48 Read article
-
Experimental Testing and Ply Wise Strength 0°-45°-0° Investigation of Multi-orientation Carbon Fiber Specimen by Using FEA and UTM
Abstract: Synthetic composites have higher strength to weight ratio and are extensively used in industrialapplications. Carbon fibers have extensively high tensile strength. Most of the composites haveorthotropic properties and their strength varies as per orientation. Laminar having differentply orientations have different properties and strengths. Hence, to enhance strength of carbonfiber specimen reducing layer wise damage becomes up most important. It is unimaginable toexpect to examine the layer insightful harm of each …
Published in Journal of Nuclear Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 29–37 Read article
-
Automating Acquisition through SOUL 3.0
Abstract: Library automation is an integral part of the development process of any library or resource center. Traditionally this includes automation of acquisition, serialization, cataloging and circulation. But most libraries do list entries of reading material and display them via OPAC. These libraries have been equally successful in computerized issues and returns. But the real difficulty lies in the automation of acquisition activities. It is forgotten that cataloging begins with acquisition. …
Published in Journal of Electronic Design Technology · Vol. 13, Issue 3, 2022 · pp. 9–21 Read article
-
From 2D to 3D: An Evidence Based Review of 3D Printing in Dentistry
Abstract: Additive manufacturing, the technology popularly known as “3D printing” is the process of making any 3 dimensional solid objects from a digital model. This technology has revolutionized the process of manufacturing and has enumerable applications in automotive, aerospace and defense industries. Recently it has found application in medicine and dentistry where customized prosthesis is desired for every patient. 3D printing is valuable aid in orthognathic surgery, implantology, prosthetics and even …
Published in Research and Reviews: A Journal of Dentistry · Vol. 8, Issue 3, 2017 · pp. 1–6 Read article
-
Design of Plant for the Production of 30,000 Tons Per Year Capacity of Dimethyl Carbonate (DMC) from Natural Gas Using Aspen HYSYS
Abstract: This study focuses on the design of a plant for the production of 30,000 tons per year of dimethyl carbonate (DMC) from natural gas. The plant design was carried out using the Aspen HYSYS Software. The data obtained from Kokori natural gas served as the primary feedstock for the plant. A kinetic model for the production of DMC was developed from existing literature, followed by the development of the mathematical …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 3, 2025 · pp. 45–60 Read article
-
A Comparative Study of the Structure–Property Relationships in CAD/CAM Milled vs. 3D-Printed High-Performance Polymers: Impact of Molecular Orientation on Abrasive-Wear Resistance
Abstract: Background: The transition from subtractive to additive manufacturing in prosthetic dentistry has introduced significant variations in the macromolecular architecture of high-performance polymers. While CAD/CAM milling utilizes high-density, industrially polymerized blocks, 3D printing (Additive Manufacturing) relies on layer-by-layer deposition, which may induce anisotropic molecular orientation. This retrospective study investigates how these distinct manufacturing “thermal histories” influence the long-term abrasive-wear resistance of PEEK and PEKK restorations. Materials and Methods: Data were retrospectively …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 133–140 Read article
-
Enhancing Dimensional Accuracy of Affordable 3D-Printed Objects Via Solid Model Tuning For Industrial Manufacturing
Abstract: In the industrial applications of 3D printing (3DP) technologies, achieving precise dimensional accuracy and precision as well as improving surface quality are essential goals. With a focus on cost-effective engineering applications, this experimental research examines how solid model geometry tuning improves the internal and exterior dimensional accuracy of inexpensive 3DP technologies. Dimensional errors in the X, Y, and Z directions were meticulously measured on 3D parts made using Material Extrusion/Fused …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 201–210 Read article
-
Comparative Analysis of 3D-Printed and Molded Shape-Stabilized Phase Change Composites
Abstract: Thermal energy storage (TES) has become essential for efficiently storing and utilizing thermal energy across applications like industrial heating, power plants, batteries, medical devices, food preservation, and aerospace technology. Because of their high energy density, affordability, and environmental friendliness, phase change materials, or PCMs, are employed extensively. However, challenges like poor thermal conductivity and leakage limit their performance. To address these issues, 3D printing has emerged as a powerful tool …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 184–192 Read article
-
3D-Printed Polymeric Drug Delivery Systems for Personalized Medicine
Abstract: Personalized medicine has revolutionized healthcare by tailoring treatments to individual patient needs. Among the emerging technologies, 3D printing has demonstrated immense potential in fabricating polymeric drug delivery systems with precise control over drug release, dosage, and bioavailability. These systems offer customized therapeutic solutions, improving efficacy while reducing adverse effects. This paper provides an overview of 3D-printed polymeric drug delivery systems, discussing the types of polymers used, fabrication techniques, applications in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 313–325 Read article
-
Parametric Effect on the Mechanical Property of Extrusion-Based 3D-Printed Parts
Abstract: Material extrusion-based 3D printing, a prevalent and economical approach for producing complex geometries, heavily relies on acrylonitrile butadiene styrene due to its advantageous mechanical properties and dimensional stability. Nevertheless, the mechanical integrity of 3D-printed components is considerably impacted by process variables. This research investigates the implications of critical parameters – layer height (LH), infill percentage (IP), and infill pattern design (IPD) – on the tensile, compressive, and flexural strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 160–170 Read article
-
Effective Homoeopathic Management of Allergic Rhinitis: A Case Series Utilizing Hepar Sulph 30 and Histamine 30 with Dietary Modifications
Abstract: Background: Allergic rhinitis (AR), means our immune system intruded by some allergens which is typically a harmless substance. These allergens are found in the air we breathe, in the food we eat, in the water and fluids we drink. These allergens are attacking on our immune system and the immune system responds to the allergens by releasing histamine and chemical mediators that cause symptoms in the nose, throat, eyes, ears, …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 11, Issue 2, 2024 · pp. 12–16 Read article
-
Fabrication of 3D Printer
Abstract: This article gives us a insight about 3D printer technology considering its concepts, history and technology of a 3D printer. The major points covered in this article are Introduction of 3D printer, background, problem statement and scope of 3D printer. The printing process involves creating of a 3-dimensional model, converting it into. STL file, slicing it, feeding the stl file to the 3D printer and the final printing process done …
Published in Journal of Mechatronics and Automation · Vol. 7, Issue 2, 2020 · pp. 10–13 Read article
-
Optimizating Pitting Corrosion in 3.5 N NaCl Medium of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets Using Genetic Algorithm
Abstract: Austenitic stainless steel sheets have gathered wide acceptance in the fabrication of components, which require high temperature resistance and corrosion resistance, such as metal bellows used in expansion joints in aircraft, aerospace and petroleum industry. In case of single pass welding of thinner sections of this alloy, pulsed current micro plasma arc welding (PCMPAW) was found beneficial due to its advantages over the conventional continuous current process. This paper highlights …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 132–142 Read article
-
The thermodynamic studies of 6-(4-chlorophenyl)-1, 2, 3, 4-tetrahydro-2,4-dioxopyrimidine-5-carbonitrile in 60% DMSO in the temperature range 298 to 313 K
Abstract: Densities and viscosities of 6-(4-chlorophenyl)-1, 2, 3, 4-tetrahydro-2,4-dioxopyrimidine-5-carbonitrile have been measured at different concentration in 60% dimethyl sulphoxide (DMSO) in the temperature range 298 to 313 K. The John-Dole equation was used to determine the viscosity. Gibb’s free energy (∆G), entropy change (∆S) and enthalpy change (∆H) were evaluated from relative viscosity . The negative sign of ∆G and ∆H and positive sign of ∆S indicates the spontaneity of reaction …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 78–81 Read article
-
Synthesis and Study of Photoluminescence properties of Sm3+ activated 7TiO2 + 3Al2O3 + (60-x)B2 O3 +xY+ 5LiCO3 +25SrCO3 Borate Glass for SSL Applications
Abstract: Melt quenching was used to successfully create the raddish orange light-emitting Sm3+activated 7TiO2 + 3Al2O3+ (60-x) B2O3+xY+ 5LiCO3+25SrCO3 (X=0.001, 0.002, 0.005, 0.01 and 0.02, Y=Sm3+) borate glass. XRD examination confirmed the phase of the prepared Un-doped and Doped 7TiO2 + 3Al2O3+ (60-x) B2O3+xY+ 5LiCO3+25SrCO3 glass. Its PL characteristics under ultraviolet (UV) light (302-468 nm) were later studied. At 602 nm, the excitation was detected, and at 402 nm, the emission. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 55–60 Read article
-
ML-Based Predictive Modeling of Mechanical Properties in 3D-Printed Polymer Composites for IoT Applications
Abstract: This study aims to develop an interpretable and high-accuracy machine learning framework for predicting the mechanical properties of 3D-printed fiber-reinforced polymer composites, with a focus on structure–property correlations relevant to polymer processing and functional performance. Composite specimens based on PLA and ABS matrices were fabricated using FDM with varying weight fractions (5–20 wt%) of carbon and glass fibers. Standardized mechanical testing (ASTM D638, D256, D790) was performed to evaluate tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 61–78 Read article
-
Design and Fabrication of a 3D-Printed Femur Model: Insights into Mechanical Properties and Implant Research
Abstract: This study is an attempt to analyse the 3D printing of the female femur model of the central India region and provides ample suggestions for bone implant research. This article discusses the design development and experimental validation of finite element analysis (FEA) results with the 3D-printed bone model. Using CT scan data, the FE analysis is executed on a real femur bone of a 25-year-old female of 52 kg weight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 329–338 Read article
-
A Biomechanical Analysis of Interspinous Spacer by 3D-Finite Element Method
Abstract: Background: Interspinous spacers are known as reliable alternatives for the treatment of various spinal disorders including lumbar spinal stenosis, facet arthrosis, internal disc disruption and so on. Many studies have been performed to investigate biomechanical and clinical features in relation to different interspinous spacers; however, little has been reported on interspinous spacer made of high polymer plastic materials. We purposed to evaluate biomechanical properties of interspinous spacer made of high …
Published in Research and Reviews : Journal of Surgery · Vol. 9, Issue 3, 2020 · pp. 25–35 Read article
-
Comparison of Lateral and Medial Plate Fixations of Talar Neck Fracture: A 3D-Finite Element Analysis
Abstract: Background: Talar neck fractures are rare, but challenging injuries, because the bone has unique anatomy, and its blood supply makes it difficult to stabilize the fracture and is likely to cause posttraumatic or postoperative complications. Thanks to development of appropriately sized plates, outcomes of plate fixation of talar neck fractures have been improved compared with screw fixation. Although some studies have demonstrated no difference between screw only fixation and screw-plate …
Published in Research and Reviews : Journal of Surgery · Vol. 12, Issue 1, 2023 · pp. 6–15 Read article
-
Pharmacophore mapping, 3D QSAR, docking, and ADME prediction studies of novel Benzothiazinone derivatives
Abstract: Background Tuberculosis is a major public health concern worldwide which is caused by Mycobacterium tuberculosis. DprE1 (Decaprenyl Phosphoryl Ribose 2’- Epimerase) is the most challenging target for development of novel anti- tubercular agents because it is a small protein and located into cytoplasmic membrane. So, novel anti-TB drugs did not bound effectively with it. DprE1 catalyzes the oxidation of the 2’ hydroxyl group of DPR (Decaprenyl Phosphoryl D- Ribose) …
Published in International Journal of Antibiotics · Vol. 1, Issue 1, 2024 · pp. 59–82 Read article