Search
214 articles for “Operational parameters”
-
Bayesian Optimization–Driven Operating Parameter Tuning for Maximizing Methane Yield in Anaerobic Digestion
Abstract: To achieve maximum methane production in an anaerobic digestion (AD) process, a combination of various operational parameters must be tuned nonlinearly in the digestion ecosystem. The conventional trial and error optimization methods are slow, resource consuming, and in most instances, cannot model the intricate parameter interaction in biogas production. The current work introduces a Bayesian Optimization-based model to optimize the set of conditions to maximize the level of methane produced …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 1–8 Read article
-
Optimizing Parameters for Dry Sliding Wear Control in Stir-Cast AA7050/SiC Composites
Abstract: Using a pin-on-disc tribometer, this study examined the dry sliding wear behavior of AA7050/SiC composites. The production of this metal matrix composite was achieved through the stir-casting process, which involved an initial step of melting the AA7050 alloy, followed by the careful introduction of silicon carbide (SiC) particles, stirring to achieve uniform dispersion, and finally, casting the molten mixture. Wear rate (WR) was determined by three operational parameters: SiC reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1624–1635 Read article
-
Optimization of a new Bebq2/BCP-based OLED structure for optimum performance
Abstract: Opto-electronic devices exhibit highly nonlinear current–voltage (I–V) characteristics that significantly affect charge injection, transport, and recombination, evaluating their performance remains a difficult challenge. Device optimization is a key research goal in organic light-emitting diodes (OLEDs), as the thickness and arrangement of individual functional layers greatly influence electrical and optical responses. For a suggested Bebq2/BCP-based OLED structure, this work methodically examines the movement of charge carriers, their transport behavior, and the …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 2, 2026 Read article
-
Thermal analysis of sustainable composite material absorption refrigeration system for cold storage application
Abstract: Present study deals with thermal analysis of absorption refrigeration system (ARS) and generator-absorber heat exchanger (GAX) based absorption refrigeration system by using green composite like aqua-ammonia. Evaporator temperature is 0°C for cold storage application, condenser temperature is 50°C as per Indian weather condition, mass stream rate of strong solution through the pump is 1 kg/s, and effectiveness of solution heat exchanger and refrigerant heat exchanger is 0.7 considered for present …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 18–27 Read article
-
IOT Based Monitoring and Controlling Substation Equipment
Abstract: The project ”IoT-Based Monitoring and Controlling Substation Equipment” revolves around utilizing the Internet of Things (IoT) technology to make the substation equipment electrical monitoring and control easy. Timely monitoring of these substation equipment is utmost important in ensuring the stable and reliable operation of the power distribution system. This project will design a system whereby sensors collect real-time data on the key parameters such as voltage, current, temperature, humidity, and …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 2, 2025 · pp. 53–58 Read article
-
Laser Beam Machining Techniques and Applications: A Review
Abstract: Laser beam machining (LBM) is the most common thermal energy-based non-contact, non-conventional machining process. The non-conventional manufacturing processes are used to remove extra material using a variety of mechanical, thermal, electrical, chemical, or combinations of these energies without the use of sharp cutting tools as is required for conventional manufacturing. With innovative approaches to manufacturing processes, it has transformed a number of industries. It is frequently used to machine a …
Published in Journal of Microwave Engineering and Technologies · Vol. 11, Issue 3, 2024 · pp. 28–35 Read article
-
Application-Driven Rule-Based Framework for Lubrication Failure Modes in Industrial Systems
Abstract: Modern lubricants increasingly rely on polymer-based composites, integrating synthetic base oils, polymer thickeners and solid additives like MoS₂ and PTFE for high-performance applications. These formulations not only enhance thermal and mechanical stability but also enable low-friction operation across diverse industrial conditions. Lubrication-related failures represent a critical cause of unplanned downtime and reduced reliability in industrial machinery. This paper presents an application-driven, rule-based framework designed to assess and mitigate lubrication failure …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 522–531 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Performance Analysis of Dual Junction Solar Cell Devices utilizing Subcells of In0.51Ga0.49P and GaAs to Study Key Solar Cell Parameters via TCAD based Simulation
Abstract: In the present work, a multi-junction solar cell was designed to obtain better performance over single-junction solar cells. The proposed structure is composed of different layers of diverse semiconductor materials stacked on each other. Here, an In0.51Ga0.49P/GaAs double-junction solar cell was outlined as having a distinctive composite material (GaAs) as the tunneling junction. To optimize the solar cell's effectiveness, In0.47Ga0.15Al0.37P was used in the window layer and the back-surface field …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 829–837 Read article
-
IoT Sensors to Monitor Pipeline Pressure and Flow Rate Combined with ML-Algorithms to Detect Leakages
Abstract: In the field of fluid mechanics, pipelines are the lifeblood of industries, transporting everything from natural gas and oil to water and chemicals. Maintaining their integrity is paramount for safety, economic efficiency, and environmental protection. Traditional leak detection methods explained in fluid mechanics can be slow, expensive, and sometimes fail to identify small leaks early enough to prevent significant damage. However, the convergence of Internet of Things (IoT) and Machine …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 2, 2025 · pp. 40–48 Read article
-
A Review on Predicting Wear and Friction of PTFE Composites - Fillers to Machine Learning Models
Abstract: Polytetrafluoroethylene (PTFE) composites, a self-lubricating material with low friction, became an indispensable material in engineering applications where load carrying capacity and wear are crucial. The pure PTFE has poor mechanical strength and wear resistance which can be enhanced by the addition of fillers in appropriate volume fraction. The wear performance is dependent on various factors such as fillers, operating parameters, environmental conditions as well as manufacturing attributes. This makes the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 114–128 Read article
-
Thermal Performance Analysis and Optimization of Pin-Fin Heat Sink Using CFD, Taguchi Method, and Machine Learning
Abstract: Efficient thermal management is essential for improving the performance and reliability of modern engineering systems and electronic devices. This study presents the design, simulation, and optimization of a pin-fin heat sink using SolidWorks for three-dimensional modeling and ANSYS for thermal and computational fluid dynamics (CFD) analysis. Four different pin-fin geometries, namely square, pentagon, octagon, and circular fins, are considered to evaluate their thermal performance under varying operating conditions. Aluminum is …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Psychometric Analysis of an Induced Cooling Tower in a Humid Condition
Abstract: An Induced Cooling Tower (ICT) is an energy transformation device that facilitates heat and mass transfer by leveraging ambient conditions. ICTs are particularly effective in applications requiring a large heat transfer surface area, utilizing evaporative cooling of ambient air to cool hot steam. The performance of an ICT is significantly influenced by ambient humidity and temperature, making these environmental factors critical in its design and operation. As such, ICTs are …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 22–29 Read article
-
Innovative Biosensor Applications in Petroleum Industry for Enhanced Monitoring and Safety Measures
Abstract: The petroleum industry is fundamental to the global economy, providing the energy and raw materials that drive modern society. However, this industry faces a myriad of challenges, including ensuring the safety of operations, monitoring critical processes effectively, and minimizing environmental impacts. Traditional monitoring techniques, while valuable, often fall short in delivering real-time data and comprehensive insights into operational parameters. These limitations can result in delayed responses to potential hazards and …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 1–13 Read article
-
Development of a Generative AI Model for Early Detection and Prevention of Electrical Faults in Thermal Power Plants
Abstract: Electrical faults in thermal power plants can lead to severe equipment damage, production downtime, and safety hazards if not detected in advance. This study presents the development of a Generative Artificial Intelligence (GenAI) model for the early detection and prevention of electrical faults using predictive analytics. The proposed framework integrates Generative Adversarial Networks (GANs) with deep learning (CNN) and machine learning algorithms (Random Forest, Logistic Regression) to enhance data diversity, …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 1–10 Read article
-
Quantitative Image-Based Assessment of Degradation Patterns in Polymer-Based Medical Implants
Abstract: Polymer-based medical devices are widely used in clinical practice, where long-term material degradation can compromise performance and patient safety. Traditional polymer degradation studies predominantly rely on laboratory-based experiments, which often fail to capture real-world operational and usage conditions. In this study, a multimodal, data-driven framework is proposed for the quantitative assessment of degradation patterns in polymer-based medical devices using publicly available clinical failure data. Structured operational parameters, including cumulative usage …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1510–1518 Read article
-
Recent Advancements in High-Performance Liquid Chromatography: A Comparative Approach
Abstract: Modern separation science relies heavily on chromatography, which is used in all research institutes and pharmaceutical industries all around the globe. Of all the chromatography approaches, HPLC i.e. high performance liquid chromatography is the one that is most frequently used analytically. Recent improvements in chromatographic supports and liquid chromatography (LC) equipment have made rapid and incredibly effective separations possible. This summary emphasizes the key milestones and foundational advances in HPLC …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 40–48 Read article
-
Improving the Efficiency of Solar Cabinet Dryers: A Comprehensive Review
Abstract: Solar cabinet dryers offer an eco-friendly and sustainable solution for drying agricultural products, utilizing solar energy to reduce moisture content. However, to match the performance of conventional drying methods, there is a need to enhance the efficiency of these systems. This research article delves into various strategies to increase the efficiency of solar cabinet dryers, including design optimization, material selection, airflow management, and operational adjustments. Key improvements such as multi-pass …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 3, 2024 · pp. 22–27 Read article
-
Statistical Modeling of Heat Transfer and Fluid Dynamics: Application in Mechanical Engineering Design
Abstract: Understanding and optimizing the intricate processes involved in heat transfer and fluid dynamics—two concepts essential to mechanical engineering design—require statistical modeling. Engineers can forecast, regulate, and enhance the performance of systems including heat exchangers, turbines, cooling mechanisms, and different fluid machinery by using statistical approaches. In order to address uncertainties, variability in material properties, boundary conditions, and operational parameters, this work investigates the integration of statistical modeling tools in the …
Published in Research & Reviews : Journal of Statistics · Vol. 13, Issue 2, 2024 · pp. 18–22 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article