Search
35 articles for “Micro clay”
-
STUDIES ON MECHANICAL, OPTICAL AND BARRIER PROPERTIES OF LOW DENSITY POLY ETHYLENE WITH MICRO CLAY
Abstract: LDPE (Low density Poly ethylene) was melt blended with micro clay (0.5, 1, 3 & 5 wt%) by using a twin screw compounding extruder. Tubular blown film was taken using a tubular blown film extruder. Mechanical, optical and barrier properties were evaluated. The following trend was observed as the micro clay concentration was increased: The tensile strength was increased by 18% in machine direction (M/D) and decreased by 36% in …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 23–31 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
STUDIES ON MECHANICAL, THERMAL AND PERMEATION PROPERTIES OF HDPE (BLOW GRADE) WITH MICROSILICA CLAY
Abstract: HDPE is widely used in container applications. The mechanical properties and barrier properties can be further improved by the addition of reinforcements like nanoclays. But, however the cost of nanoclays are higher about Rs.5000 – 6000/kg whereas micro silica cost is economical about Rs.450-1000/kg. Hence we used micro silica of 270nm particle size in this project with HDPE blow grade. HDPE (High density polyethylene) was melt blended with micro silica …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 41–53 Read article
-
Micro-structural Analysis of Fly Ash and Clay Compacts
Abstract: Industrial waste like fly-ash is mainly used as a good building material due to its low weight. But the main disadvantage of these bricks is its low compressive strength. So, a lot of research is going on to increase the strength of these bricks. Normal clay is used for making of bricks in a cheaper sense. So, a research is carried out to develop a new systematic procedure to produce …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 28–31 Read article
-
Microbial Population Dynamics during Phytobioremediation of Hydrocarbon- Contaminated Swampy and Clay Soils
Abstract: Soil contamination by petroleum hydrocarbons remains a critical environmental challenge, particularly in wetland and clay-rich ecosystems where natural attenuation processes are often limited. This study investigates the response of total heterotrophic bacteria (THB) during the bioremediation of hydrocarbon-contaminated swampy and clay soils amended with Moringa oleifera biomass and elephant grass (Pennisetum purpureum). The objective was to evaluate microbial population dynamics under varying amendment dosages and to identify treatment conditions favorable …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 1, 2026 · pp. 31–35 Read article
-
Effect of Particle Size Mix Ratio of Clay and Agro-Based Material for AGO and PMS Treatment on Microbial Growth
Abstract: The characteristics of possible microbes isolated and identified on adsorption process involving AGO and PMS as contaminants in fresh water medium was monitored using agro – based materials. The formulated adsorbent is made of clay with ago-based materials of Banana Ogoni Red (BOR) Banana Native (BN), Plantain Agbagba 1 (PA1), and Plantain Ogoni Red (POR). The particle size mixed ratio of clay to the various agro-based materials were 150𝜇𝑚 R5:5, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 2, 2024 · pp. 05–14 Read article
-
Nanocomposites of Polyethylene-Closite 20A: Preparation and Characteristics
Abstract: Low-density polyethylene/closite 20A nanocomposites with different organoclay contents were made in the current study by a melt mixing technique with two different compatibilizers of varying contents: low molecular weight oxidized polyethylene and low molecular weight trimethoxysilyl modified polybutadiene. The inclusion of compatibilizers and concentrations of organoclay were analyzed in relation to the mechanical and thermal properties of the nanocomposites. The dispersibility of the silicate clay in the nanocomposites was investigated …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 1, 2025 · pp. 01–12 Read article
-
Preparation and Characterization of Clay-Based Hybrid Membranes for Antibacterial Biodegradable Polymer Wound Dressings
Abstract: Recent developments in the field of polymer chemistry have resulted in many new forms of Hybrid polymer. This has further revolutionized the application of polymer chemistry in numerous fields. In this research, we manufactured clay-based hybrid membrane by adding clay to the biodegradable matrix of chitosan polymer. It is widely known that microbial and pathogenic organisms are responsible for wound hampering infections such as impetigo. They can spread in bodily …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 13–20 Read article
-
Clay–Polymer Nanocomposites: An Efficient Adsorbent for Waste Water Treatment
Abstract: Despite the abundance of water sources, the globe today lacks potable water because to pollution. Pollutants can be removed from water using a variety of technologies, but adsorption is considered the most simple, effective, economical, and ecologically beneficial method. The class of adsorbents known as clay–polymer nanocomposite (CPN) adsorbents is one that is now gaining popularity. By adsorbing and flocculating inorganic and organic micropollutants from water, CPNs efficiently cleanse water. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 111–118 Read article
-
Monitoring of Microbial Growth on Crude Oil Remediation using Processed Palm Fruit Fermented Waste Water and NKP Fertilizer
Abstract: The bacteria count was done to ascertain the microbial growth rate in each reactor and the research work demonstrates the integrity of fermented palm oil processed waste water obtained the available nutrients for the restoration of microbial activity in terms of growth as well as remediation of polluted clay soil environment for optimum utilization in terms of agricultural purposes. This study is based on the overview on the ability of …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 10–22 Read article
-
Physico-Chemical Analysis of Soil Quality Parameters in Tamilnadu Region An Analytical Approach Towards Life on Land -SDG 15
Abstract: This study examines the physico-chemical properties of soil in Tamilnadu region, supporting SDG 15’s framework for sustainable land management. Soil, as a vital non-living component, plays a crucial role in ecosystem functioning by facilitating nutrient cycling, retaining water, and supporting habitats for a wide range of organisms. The research analysis key physical parameters (colour, texture, structure, porosity, density, consistency, temperature) and chemical properties, focusing on both macro and micronutrients. Various …
Published in International Journal of Solid State Innovations & Research · Vol. 3, Issue 1, 2025 · pp. 9–15 Read article
-
Direct and rapid synthesis of amides from carboxylic acids under solvent free condition using Clay based Heterogeneous recyclable catalyst
Abstract: Direct condensation of Carboxylic Acids and Amines has resulted in a highly simple and practical technique for the synthesis of amides. Fe-Al clay catalyst was used in the solvent-free, microwave-irradiated amide synthesis. Only a small amount of the catalyst was needed to produce products in very short of time with a good yield. The catalyst was easy to separate and could be recycled several times with negligible loss of catalytic …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 2, 2023 · pp. 1–9 Read article
-
Evaluation on Bioremediation Kinetics of Petroleum- Contaminated Soils Using Plant-Based Amendments
Abstract: The effectiveness of bioremediation processes is strongly influenced by environmental conditions, reactor design parameters, microbial characteristics, and pollutant properties. This study investigates the combined effects of environmental-related factors, reactor design considerations, organism- related characteristics, and pollutant properties on the degradation of total petroleum hydrocarbons (TPH) in swampy and clay soils amended. Laboratory-scale remediation experiments were conducted over an 84-day period using amendment dosages ranging from 20 to 100 g. The …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 1, 2026 · pp. 24–30 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Determining Fertility Status of soil at Different land uses at Koka Watershed Tembaro Woreda, Central Ethiopian
Abstract: The study was conducted in Central Ethiopia, Tembaro Woreda, for two consecutive years, 2023 and 2024, at Bohe and Bachira Kebeles within the Omo River Basin in the Koka watershed. The objectives of this study were to determine the fertility status of different land uses at the study sites. The study results indicate that soil at the study site ranges from moderately acidic to slightly acidic, with low to moderate …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 15, Issue 2, 2026 · pp. 10–17 Read article
-
Algae as Bio-Fertilizer
Abstract: Bio-fertilization represents a sustainable agricultural practice that leverages bio-fertilizers to enhance soil nutrient levels, thereby increasing agricultural productivity eco-friendly and feasible substitute for pollution-free agricultural applications, soil microflora has been used to increase biomass production and improve soil fertility. Numerous cyanobacteria, including species like Oscillatoria angustissima, Nostoc sp., and Anabaena sp., are known to be efficient nitrogen-fixing biofertilizers. Acuteodesmus dimorphus, Spirulina platensis, Chlorella vulgaris, Scenedesmus dimorphus, Anabaena azolla, and Nostoc …
Published in Research and Reviews : Journal of Crop science and Technology · Vol. 14, Issue 1, 2025 · pp. 32–41 Read article
-
Isotherm and Kinetic Studies of Methylene Blue Dye Adsorption Using Sulfuric Acid Activated Nigerian Montmorillonite Clay
Abstract: The Presence of methylene blue and other basic dyes in water causes various harmful effects for both human and aquatic species. In this study, montmorillonite clay in its raw and acid (0.5M H2SO4) activated states were investigated for the sorption of methylene blue dye. The structural changes due to acid treatment were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The studied parameters that affect adsorption efficiency were …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 2, 2020 · pp. 37–47 Read article
-
Nano-enhanced Bio-based Phase Change Materials: A Brief Revie
Abstract: The high latent temperatures and variable melting points of bio-based phase change materials make them ideal for thermal control. This covers heat regulation for medical and pharmaceutical items, building comfort, and high-end electronics and automobiles. In recent years, research and application of energy-saving materials and technologies in buildings has increased strength. Modern construction technology aims to keep old and new structures energy efficient. TES employing PCMs is an energy-efficient approach. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 15–27 Read article
-
Poly Vinyl Alcohol/Kaolinite Clay/Grafted Cellulosic Fibre Based Hybrid Composite Films: Physical, Mechanical, Optical and Biodegdrability Studies
Abstract: In this study, physical, mechanical, optical, morphological and biodegdrability properties of poly vinyl alcohol (PVA)/kaolinite clay (KC)/grafted barley husk (GBH) based hybrid composite films were prepared by solution casting method. Barley husk was grafted with oleic acid using graft copolymerization method. The hybrid composite films were characterized by FTIR and SEM. Based on the findings from this work, water uptake of the composite films increased with increase in the amount …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 41–52 Read article