Search
457 articles for “Low Temperature”
-
Selection of Working Fluid for Organic Rankine Cycle by Energy and Exergy, For Low Temperature Low Enthalpy Dholera Geothermal Reservoir
Abstract: In today’s scenario of increasing energy demand, it is high time to give emphasis on renewable energy sources. The conventional energy sources that humanity is depending upon today are not only depleting, but also cause significant environmental impact. The burning of coal and fossil fuels causes serious air pollution and several major cities are already under deep threat due to the increasing amount of pollution. Future predictions show an exponential …
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 2, 2016 · pp. 1–10 Read article
-
Anti-static Additive and Particulate Formation in Jet Fuel at Low Temperature
Abstract: Over-dosed anti-static additive Stadis 450 can form particulates in jet fuel when temperature goes down to around -38oC. The particulate formation was observed during freezing point test. The jet fuel produced by Toruk refinery of Arabian Gulf Oil Company of Libya had freezing point of about -55OC which is lower than required-47OC for jet fuel A-1. Key words: Libya, Tobruk refinery, Sarir refinery, Jet Fuel, Anti-Static Additive, Particulate, Low Temperature
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 1–4 Read article
-
Comparison of High and Low Temperature Properties of Dual Modified Asphalt Binders with Polyphosphoric Acid and Polymer Modified Bitumen using Rheological Tests
Abstract: The main objective of this study was to investigate the properties of asphalt binder mixtures at both high and low temperatures. To achieve this, two types of admixtures were selected and combined, resulting in a technology known as dual modified asphalt binders. Extreme temperatures during summer and winter can lead to significant issues such as cracking and rutting in asphalt binder pavement. In order to address these problems, a comprehensive …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 23–34 Read article
-
Experimental Setup for the Measurement of Low Temperature Seebeck Coefficient of Single Crystal and Bulk Materials
Abstract: A differential thermopower setup is fabricated for both the single crystal and bulk materials in the temperature range of 16–320 K. One advantage of this apparatus is that the sample separation can be changed according to the requirement between 2 and 5 mm. In this setup silver paint is used for the improvement of thermal and electrical conductivity between copper (thermocouple) leads and material. Seebeck coefficients are measured using a …
Published in Journal of Control & Instrumentation · Vol. 5, Issue 2, 2014 · pp. 25–30 Read article
-
Review of Organic Rankine Cycle with various Heat Sources
Abstract: AbstractThis paper, reviews about the working and performance of Organic Rankine cycle with different heat sources. There are various sources of heat are available, from the range of low temperature to very high temperature. The source of this heat is of many types such as various types of engines, chemical industries, machines and various processes. This cycle allows re-cycling the waste heat from various sources is converted into useful work …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 33–36 Read article
-
INFLUENCE OF CLIMATIC CHANGES ONTO THE PERFORMANCE OF ELECTRIC VEHICLES: APPLICATION TO DRIVING RANGE
Abstract: The paper has the goal of developing a methodological process to predict electric vehicle driving range under the influence of sudden temperature changes in intercity routes due to variable climatic conditions. The model is based on the combined effects of discharge rate and temperature changes on the performance of a lithium battery; the model predicts the driving range using the dynamic driving conditions to determine the Depth-Of-Discharge (DOD) at any …
Published in Journal of Automobile Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 43–58 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer
Abstract: Magnetorheological elastomers (MREs) are smart materials capable of tuneable stiffness and damping under applied magnetic fields. This renders the material as a promising candidate for adaptive vibration control and semi-active engineering applications. While their behaviour at elevated temperatures has been widely explored, limited attention has been given to their performance under sub-zero conditions, which are critical for cold-environment applications. As this has become an important concern, the study investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 326–340 Read article
-
New trends in Radio Frequency design and making things smaller
Abstract: Recent improvements in wireless communication, the Internet of Things (IoT), and 5G/6G networks have made people want small, powerful radio frequency (RF) equipment. With an emphasis on how developments in materials engineering, circuit architecture, and packaging technologies are redefining RF system integration, this article offers a thorough evaluation of current developments in RF downsizing. System-on-Chip (SoC), System-in-Package (SiP), and Antenna-in-Package (AiP) ideas, which allow tightly integrated RF front-ends with enhanced …
Published in International Journal of Radio Frequency Innovations · Vol. 3, Issue 2, 2025 · pp. 28–34 Read article
-
Application of Evaporative Cooling in Mushroom Farming: A Tube in Tube Type Evaporative Cooler
Abstract: The effort focuses on mushroom production using evaporative cooling. It has various advantages over conventional cooling techniques, including the ability to drop the temperature based on environmental conditions, the usage of 80 percent less energy than air conditioning, and the cost and maintenance requirements. With proper preparation, evaporative cooling in agriculture can assist lower the temperature and high relative humidity. Also, it helps in storing goods in cold storage using …
Published in Recent Trends in Fluid Mechanics · Vol. 9, Issue 1, 2022 · pp. 25–29 Read article
-
Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2
Abstract: In this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. Nanoparticles of Al2O3 and TiO2 were characterized by SEM and EDS. The high peaks showed the respective presence of aluminium, oxygen for alumina and titanium and oxygen for titanium dioxide. The two samples of nano-cutting fluids were prepared. Alpha alumina, α-Al2O3 nanoparticles were used for the preparation of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 329–338 Read article
-
Peltier Integrated Jacket
Abstract: AbstractAny individual who means to travel open air must be set up to arrangement with a wide range of climate beginning from the dry hot condition to the chilled coolness. The furthest points of both the conditions can prompt genuine medical issues. Changes in single degree can influence body's natural chemistry prompting different variations from the norm. There is a constraint to which layers of garments can be heaped onto …
Published in Journal of Microcontroller Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 44–62 Read article
-
Numerical Investigation of Louvered Fins for Efficient Cooling of Automotive Engines
Abstract: Air cooled fins are designed to cool motorcycle engines or similar class of small vehicles bytransferring the heat to the air as it passes in-between the fins at high speed. The air circulation andfin geometry are interdependent, and improved air circulation leads to more efficient cooling. So, inthis study a parametric numerical investigation is conducted on a new conceptual design of air-cooled fins. Design parameters are set as: fin pitch, …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 1, 2021 · pp. 6–16 Read article
-
SCIENTISTS REINVENT LOW ENERGY NUCLEAR REACTION (LENR)/COLD FUSION
Abstract: Two of the researchers of The University of Utah, USA in 1989 named Dr. Martin Fleishmann and Stanley Pons declared that they had discovered a sustained nuclear fusion reaction at room temperature during electrolysis experiment that could solve the problem of energy requirement on this planet. The cold fusion reaction, also called low energy nuclear reaction (LENR) takes place at room temperature, unlike conventional fusion reaction where temperature required is …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 3, 2024 Read article
-
Evaluation of the Emission and Engine Operability of Biodiesel and Biodiesel Blends Produced from Alkali-Catalyzed Esterification and Transesterification of Jatropha Oil Feedstock
Abstract: This study reports on the engine performance analysis of biodiesel and blends produced from jatropha-based bio-oil feedstock via combined esterification and transesterification process, the physiochemical of the bio-oil, and subsequent biodiesel produced. Jatropha bio-oil was characterized to determine its fuel properties. A liquid phase transesterification reaction at 60 min reaction time, 50°C temperature, using a methanol-oil molar ratio of 40:1 and 0.35 g of sodium hydroxide (NaOH) catalyst was carried …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 9–21 Read article
-
Thermal Comfort Analysis Thermostat Valve
Abstract: Recent analysis that has given performance on the basis of thermal analysis of thermostat valve. Play an important role in automobile Cooling system. And its performance can change according to its different temperature conditions. Thermostat valve has been extensively study with the primary direction it's Bring Down engine temperature and upgrade performance of engine. Thermostat valve play an important role in automobile cooling system for durable the engine temperature in …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation Read article
-
Nanotechnology and Nanoparticles for High Altitude Agro-ecosystem and Environmental Sustainability
Abstract: High-altitude agro-ecosystems are widely distributed throughout the world. In the Indian subcontinent, Himalayan region represents the high-altitude ecosystems, which demand extensive management due to their increasing deterioration in recent times. The extremely low temperature, proneness to natural calamities, recurring floods, droughts, low soil moisture and fertility, high solar intensity impose constraints for sustenance of hill agriculture. To enhance crop productivity to sustain increasing population, hill farmers are using excessive amount …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 155–164 Read article
-
Detailed review on adsorption refrigeration system for different adsorbent/adsorbate working pair green composite materials – An environmental aspect
Abstract: Adsorption refrigeration is one of the greatest encouraging system for the refrigeration applications due to use of low grade energy. Present study deals with detailed review of adsorption refrigeration system. This article mainly concern with adsorption refrigeration arrangement by the utilization of most appropriate operational pairs namely activated carbon/methanol, silica gel/water and zeolite/water. Detail review carried out to predict thermal analysis and performance of the system. Mechanical properties of the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 1–9 Read article
-
Photocatalysis Unveiled: Fundamentals, Mechanisms, and Material Innovations
Abstract: The Industrial Revolution significantly enhanced living standards but also led to severe environmental degradation, making pollution a critical concern for both developed and developing nations. Photocatalysis, a light-driven chemical process, accelerates thermodynamically demanding reactions, such as photosynthesis, offering a promising alternative for deep solar energy storage. This method also minimizes chemical exposure and reduces environmental pollutants generated by industrial activities. A key advantage of photocatalysis is its ability to replace …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 1, 2025 · pp. 08–18 Read article
-
An Austempering Study of Ductile Iron and the Effect of Copper Addition on the Tensile Properties of Austempered Ductile Iron
Abstract: Austempered Ductile Iron (ADI) has proved to be an excellent material as it possesses attractive properties like high strength, ductility and toughness combined with good wear resistance and machinability. These properties can be achieved upon adequate heat treatment which yields optimum microstructure for a given chemical composition. In this work, an investigation has been conducted on ductile iron alloyed with Cu and austempered in a range of time and temperatures. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 1–7 Read article