Search
42 articles for “FT-IR”
-
Composition and Structure of Oil Finishing Agent †
Abstract: Use of oil finishing agent is widely used in the process of production of carbon fibers to impart unusual and exceptional strength to the carbon fibers, the key load-bearing component, of the advanced materials, namely, carbon fiber reinforced composites (CFRPs). CFRPs are being widely used in the realm of aeronautics, astronautics, aeronautics, geonautics, sports equipment, and many more. However, quite often, much of the knowledge on the composition of oil …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 1, 2025 · pp. 01–10 Read article
-
A Study of Nacl Alkali Treated Muntingia calabura fibre Reinforced Composites
Abstract: Natural fibre reinforced composites are more commonly used in various applications due to their biodegradability, low cost, available in nature and less harmful to the environment than synthetic fibres. In the present study, NaCl alkali treated MuntingiaCalaburafibres(MCF) reinforced composites are developed using hand layup technique and evaluated the mechanical properties of the composites. The increase of the NaCl content (up to 20 percent) and the fibre weight is maintained constant …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 500–507 Read article
-
Synthesis and Functional Group Analysis of Solution Processed Zinc Oxide Thin Film Grown on Polyethylene Terephthalate
Abstract: Flexible electronics field is growing every day. Existing technology is facing issues like brittleness, toxicity, inadequacy. Fabrication cost increases in processing of such materials. In this work, zinc oxide nanoparticles synthesized by solution processing technique were used to grow 120nm thick thin film (TF) on Polyethylene terephthalate (PET). This method reduces the processing cost and Zinc Oxide (ZnO) is cheaper and abundant in comparison to other semiconductors option. Material was …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 56–66 Read article
-
Diglycidyl Ether of Bisphenol A (DGEBA) Based Epoxy Sizing Agent Induces Surface Polarity in Carbon Fibers†
Abstract: Determination of the chemical structure and composition of the sizing agent is a challenge as its concentration is low, varying in the range from ~0.5 wt.% (for polyacrylonitrile, PAN, based carbon fibers) to ~1 wt.% (for pitch-based carbon fibers). Moreover, such a piece of knowledge is vital for designing compatible polymer matrices to prepare CFRPs for diverse applications. As a result, the sizing layer that is coated on the carbon …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 24–34 Read article
-
Valorization of shrimp processing waste by green methodology and its application in Chitosan-PEG composite film
Abstract: Shrimp processing waste is mostly unidentified marine by product, presents considerable environmental pollution which also offers a rich but not fully exploited sources of biopolymers. The current work presents a sustainable method to convert shrimp processing waste into chitosan a biopolymer by green methodology. Isolation of chitin to chitosan from shrimp processing waste was carried through four green methodology steps i. Demineralization using citric acid ii. Deproteinization using papain iii. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
An Investigation on Influence of Gamma Irradiation and Doping on Chemical Structure and Optical Properties of Conducting Polypyrrole
Abstract: In this study the authors report on effect of gamma irradiation and doping (bromine, iodine and sulfate ion) on chemical structure and optical, electronic properties of poly pyrrole. Optical absorption spectrum of PPY shown absorption bands centered around 36.2.5nm (peak 1), 450 nm (peak2) and 525 nm (peak 3) positions Gamma irradiation resulted in broaden of peak A together with a band shift of 45- 525 nm and disappearance peaks …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Synthesis of Lawsonia Inermis (Henna) Carbon Supported AgO Nanocomposite, Characterizations and Photocatalytic Activity Studies
Abstract: Synthesis of Carbon supported AgO nanocomposite is reported for first time. Henna carbon was successfully synthesized from henna leaf. Bare AgO and C-AgO nanocomposites are effectively made using precipitation method. The synthesised composites structural, morphological, and optical properties are assessed using FT-IR, XRD, FE-SEM, UV-DRS, and PL techniques. FT-IR analysis proved that specific functional groups of synthesized materials. The uniform distribution of the composites is revealed in the FE-SEM. XRD …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 749–760 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition
Abstract: In the proposed work, Zinc oxide nano particles (ZnO NP's) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal decomposition. The samples are characterized using X- ray diffraction (XRD), UV visible spectroscopy (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The XRD pattern exhibit single-phase polycrystalline nature of all the samples exhibiting the most intense peak at (101). The diffraction peaks are located at 31.80, 34.46, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 39–45 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Excoecaria agallocha Extract from Leaves Encounters Antifungal, Antibacterial, and Cytotoxic Activity – In Vitro Studies
Abstract: Mangroves contain a wide range of bioactive substances, certain of and these have been used as solutions for a variation of conditions for thousands of years. Excoecaria agallocha leaf application components have been extracted in the presence of organic solvents along with water-based with a Soxhlet apparatus and antibacterial research properties employing diffusion agar well assays towards nine different kinds of culture infectious agents, six clinical trials isolated compounds, as …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 15, Issue 2, 2025 · pp. 1–7 Read article
-
Development and Evaluation of a Novel Polyaniline/Polyvinyl Alcohol/Silver Nanocomposite for Antibacterial Applications: Synthesis and Characterization
Abstract: A novel nanocomposite made up of polyaniline, polyvinyl alcohol, and silver (PAL/PVA/Ag) was synthesized using the reduction of chemical technique in this study. Aniline was polymerized in situ with ammonium persulfate to create polyaniline (PAL), while Ag+ ions were employed to make an nanoparticle of Ag colloidal solution. The combination of Ag nanoparticles with the PAL/PVA composite resulted in the development of a new nanocomposite. Scanning electron microscopy (SEM) and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 39–47 Read article
-
Improved Photocatalytic Activity for Removal of Methylene Blue Dye from Aqueous Solutions with La2O3-Modified Ceria Heterostructured Binary Oxide Nanocomposite Particles
Abstract: The current study aimed to examine the photocatalytic efficacy of a bimetallic CeO2-La2O3 hetero-NC in comparison to monometallic CeO2 and La2O3 nanoparticles (NPs), utilizing Methylene Blue (MB)as pollutant sample under natural solar and UV irradiation. The coprecipitation method was utilized to produce a bimetallic CeO2-La2O3 hetero-NC. Following this, the nanostructures underwent characterization through various techniques including FT-IR, FE-SEM, XRD, UV Vis- DRS, Raman, and Photoluminescence spectroscopy. The catalytic activity of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 514–532 Read article
-
Synthesis of Magnetically Recoverable Nickel (II) Complex-Functionalized Fe3O4@ISNA (ISNA= Isonicotinic acid) Nanomaterials: Catalytic Studies on Nitrophenol Reduction and TD- DFT Studies
Abstract: In this study, we aimed to develop a novel, environmentally sustainable, and magnetically separable heterogeneous nanocatalyst, denoted as Fe3O4@ISNA@NiL (where L represents the ligand). The synthesis involved a two-step process, first, isonicotinic acid was chemically grafted onto the surface of iron oxide nanoparticles (Fe3O4) to introduce functional groups capable of further chemical modification. Subsequently, a nickel(II) Schiff base monomeric complex was anchored onto the modified surface, resulting in a nanocatalyst …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 88–96 Read article
-
Synthesis of Magnetically Recoverable Nickel (II) Complex-Functionalized Fe 3 O 4 @ISNA (ISNA= Isonicotinic acid) Nanomaterials: Catalytic Studies on Nitrophenol Reduction and TD- DFT Studies
Abstract: In this study, we aimed to develop a novel, environmentally sustainable, and magnetically separable heterogeneous nanocatalyst, denoted as Fe 3 O 4 @ISNA@NiL (where L represents the ligand). The synthesis involved a two-step process, first, isonicotinic acid was chemically grafted onto the surface of iron oxide nanoparticles (Fe 3 O 4 ) to introduce functional groups capable of further chemical modification. Subsequently, a nickel(II) Schiff base monomeric complex was anchored …
Published in Journal of Polymer & Composites Read article
-
The Utilization of Oil Entrapped Floating Alginate Beads in a Gastroretentive Delivery System is Intended to Improve the Bioavailbility of Telmisartan Incorporating Principles of Bioinformatics
Abstract: Oil entrapped floating calcium alginate beads of Telmisartan were successfully prepared using sodium alginate as polymer and two different oil phases of mineral oil and olive oil by emulsion gelation method. The FT-IR spectra of final optimized formulation confirms no drug- polymer incompatibility. The floating time of beads was found to be more than 12 hrs suggesting that the method used for prepration was effective. The floating time of optimized …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 11, Issue 1, 2024 · pp. 21–38 Read article
-
Formation, Characterization and Microscopic Study of Four- and Five-membered Ring
Abstract: Types of organic compounds are famous for many industrial and medical applications, including azo compounds, one of the largest groups involved in the manufacture of various organic compounds. For example, they are considered as initiators of free radicals in the polymerization reactions of alkenes used in the manufacture of plastics. Most of cyclic compounds have nano properties which make this type of compound important in organic field. It is also …
Published in OmniScience: A Multi-disciplinary Journal · Vol. 14, Issue 1, 2024 · pp. 1–15 Read article
-
Steam Activated Carbon Material from the Fruit Shells of Sterculia foetida for Energy and Environmental Applications
Abstract: Steam activation of the biochar from Sterculia foetida forms a green route for the synthesis of activated carbon material with high specific surface area (1017 m2/g). The corresponding value with a chemical activating agent (K2CO3) is much lower (596 m2/g). Structural parameters of the activated carbon materials were deduced from XRD studies. Moreover the thermal stability of the activated carbon materials from steam activation is nearly 100°C higher than that …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 1, 2024 · pp. 23–33 Read article
-
Removal of Lead (II) ions from Water by using green nanoTrimanganese Tetroxide
Abstract: Inorganic pollutants like heavy metal ions and organic pollutants like pesticides and dyes are the main causes of water pollution. These contaminants cause serious issues for the environment and public health when they are present. To get rid of these contaminants from water bodies, several methods are employed.Due to its ease of use, great efficiency, abundance of adsorbents, and low sludge creation, adsorption is the most advantageous method for purifying …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 691–700 Read article